Srhythm S2 True Wireless Stereo Earbuds User Manual

True Wireless Stereo Earbuds Srhythm Soulmate Series (S2)
User Manual

What’s in the Box:

Pay Attention to Battery
S2 is powered by a built-in rechargeable lithium battery. Please charge S2 above 8 hours before using it for your first time.

1. Only the attached Type-C cable can be used for charging battery. Incorrect charging may damage batteries and earbuds.
2.  Do not attempt to open rechargeable batteries or battery packs that may broken products because of the precise structure. There are also no usable parts in it.
3. Rechargeable batteries only can be recharged by adults. Keep the battery out of reach of children. If children swallowed it, please take them to the hospital immediately.
4. Keep the battery away from the fire. Do not throw the battery into the fire,otherwise, it may explode. Batteries may also explode if being damaged. Please handle and dispose it according to your local conditions and regulations.

Product Dimensions:

You could replace silicon ear tips to be the best suitable size for your ears.(S/M/L size for your choice)

Fit earbuds into your ears.

Parameters:

True Wireless Stereo Earbuds S2, Hi-Fi sound quality, and dual-mode Bluetooth

• Above data are all from the laboratory and for reference only.

Enter Pairing Mode:

Before Pairing:
Tear off protective film and throw them away. If low battery, please charge.

Open the charging box cover for the first time, and it is available to enter Bluetooth pairing mode after full of charging. The LED indicators on earbuds will flash  blue light 3 times and you will hear a voice prompt of “Power On” from the earbuds.

Start Pairing:
Open the “Bluetooth” function on your phone,search for “S2” and click it to connect. The LED indicators on earbuds will flash blue once for every 3 seconds, and
you will hear a voice prompt of “connected” from the earbuds that means your Bluetooth pairing is successful.(While earbuds pairing,the LED indicator on one earbud flashes red and blue alternately, while the other one earbud flashes blue slowly,and there is a voice prompt of “pairing” from earbuds, which indicates that earbuds are ready for connecting to a mobile device.)

Automatic Pairing:
Normally your earbuds will automatically pairing with your mobile next time once ever paired successfully.Sometimes perhaps still need you to click the Bluetooth pairing name S2 on your mobile.
After taking out earbuds from the charging box,if it is not used about three minutes,earbuds will automatically shut down to save power.Touch and hold the touchpad for 2-3 seconds to turn earbuds on.
If connect with other devices,please firstly disconnect or cancel the pairing in the Bluetooth control panel on your phone, your S2 will enter standby state after disconnecting.

Charging to the Charging Box:

Connect the attached USB type-c cable to the USB interface of the charging device to charge the charging box under voltage 5V. It takes about 1-1.5 hours to fully charge earbuds and charging box.

Indicator light status of charging box:
The leftmost LED indicator(represents Left Earbud) and the rightmost LED indicator(represents Right Earbud) on the charging box flash green when charging. These two LED indicator lights will be off after full charge of earbuds.
If the charging box is opened, earbuds will stop being charged.
Voltage exceed 5V and under 28V will start charging protect mode. and the power can not be charged.
*Voltage exceed 28V may broke products.

Mobile charging:

Put earbuds into the charging box, and pay attention to the left and right sides. The magnetic suction of the charging box will adjust earbuds to the right position. It takes about 1-1.5 hours for earbuds to be fully charged on the left/right. Please kindly remember to wipe and dry charging connection parts of earbuds before mobile charging.

Multi-function Touchpad:

Volume:

| Volume Up: Touch and hold the Touchpad of the Right(R) Earbud about 2 seconds
| Volume Down: Touch and hold the Touchpad of the Left(L) Earbud about 2 seconds
Music:
| Play/Pause: Tap the Touchpad of either earbud once
| Previous: Tap the Touchpad of the Left(L) Earbud twice
| Next: Tap the Touchpad of the Right(R) Earbud twice
Call:
| Accept/En: Tap the Touchpad of either earbud once.
| Decline: Touch and hold the Touchpad of either earbud for 2 seconds
| Continue & Decline: Touch and hold the Touchpad of either earbud for 2 seconds
| Hold & Accept: Tap the Touchpad of either earbud twice
| End & Accept: Tap the Touchpad of either earbud once
| Switch between two calls: Tap the Touchpad of either earbud twice
| Call back the last call you dialed out: Tap the Touchpad of the Right(R) Earbud 3 times
Activate Voice Assistant
| Tap the Touchpad of the Left(L) Earbud for 3 times quickly to wake up the voice assistant

Q&A:

1. Why can not earbuds connect to each other successfully?
   Solution: turn off your mobile Bluetooth, double-click the right earbud to pair the two earbuds.

2. Why do I only hear the sound on one side?
   Solution: turn off your mobile Bluetooth, put earbuds back in the charging box,then take out two earbuds to repair.

3. How to reset the earbuds?
   Put earbuds into charging box, then press and hold the reset button on the charging box about 10 seconds until the leftmost and the rightmost LED indicators of charging box flash green light quickly.

4. How to turn off the earbuds?
   Solutions:3 ways to turn off your earbuds:
   ① Long press the touchpad 5 seconds when they are not connected to mobile devices.
   ② Put earbuds into charging box to turn off earbuds automatically.
   ③ Earbuds will power off automatically if there is no connection with a Bluetooth device about 5 minutes after powering on.

5. How to turn on the earbuds?
   Solutions:2 ways to turn on your earbuds:
   ① Touch and hold the touchpad for 2-3 seconds to turn earbuds on.
   ② Put earbuds into charging case, then take out of earbuds, that turn on automatically.

6. Why is one earbud workable and the other one earbud unworkable when I take earbuds out of charging box?
   Solution: It doesn’t mean that the earbud is broken. As when earbud is charging,you did not put the earbud on right position, or there is dust/something else remain on the charging connection parts of earbud which affect charging. So the unworkable one earbud is out of power.

7. Why can not earbuds be charged in the charging box?
   Solution: Please make sure your charging box with power. Kindly remember to wipe and dry charging connection parts of earbuds, then put them into the charging box. Perhaps some dust or something else remain on the charging connection parts of earbuds that will affect charging.

PLEASE NOTE:

1. Do not handle earbuds roughly. Do not press them with heavy objects. Keep them clear of high temperatures, humidity, and moisture.
2. For best performance, keep away from Wi-Fi routers and other high-frequency transmitting devices.
3. Please use earbuds within the effective distance of 10 meters. There should be no physical obstruction (such as a wall, etc.) between the Bluetooth device and earbuds.
4. Earbuds can be paired with any device that supports Bluetooth.

Points for Attention

1. The risk of hearing loss can be reduced by following the following safety guidelines: When connecting the headset, adjust the volume control to a minimum,and then slowly adjust the volume to a comfortable degree.Keep the volume as low as possible. If the volume needs to be increased,please adjust the volume control slowly.And stop using speakers immediately if you feel unwell in your ears or if you got tinnitus. Using a high volume for a long period of time will make your ears used to such volume,causing permanent damage to your hearing even without any apparent discomfort.
2. If you are wearing a pacemaker or other electronic medical device, you should seek your doctor’s advice before using Srhythm S2.
3. Packages contains small parts that can endanger children. Therefore, it should be kept out of the reach of children. Swallowing plastic bags can cause suffocation.
4. Do not attempt to disassemble S2 or insert any object into S2 by yourself,otherwise, it may cause a short circuit, which may lead to fire or electric shock.
5. Customer shall not replace or repair any component. Only authorized dealers or repair service center can open-finished products. If any part of S2 needs to be replaced for any reason (including normal wear and tear and damage or cracking), please contact the vendor.
6. Avoid rain, dampness, or contact with other liquids.
7. If S2 is overheating, falling, or damaged, or it falls into a medium liquid, please stop using it.
8. Using earbuds while driving may be restricted by local laws. Please consult the local authority. Be careful when using S2 when you need to devote yourself to something else. We suggest that do not use earbuds when driving.
9. Maintenance of built-in battery: Products are owered by rechargeable batteries. New batteries must be recharged and discharged two or three times before their  full function be released. Disconnect from the charger when the battery is fully charged,as overchargingwould shorten battery life. When not in use,battery in  fully charged disappears slowly. Do not place products near a heatsource or expose it to direct sunlight,dust,moisture,rain or mechanical impact. Try to keep the battery temperature between 0°C and 45°C at all time. If the battery is too hot or too cold,products may not work temporarily, even if it is fully charged.
10. When unplugging the power cord or any reinforced parts, please hold the plug and pull it out instead of pulling the cord directly. Do not use the damaged charger.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>