Srhythm S2 Noise Cancelling Wireless Earphones User Manual

Srhythm S2 Noise Cancelling Wireless Earphones

What’s in the Box

• S2 Earphone*1

• Gift Box Packing*1

• Type-C Charging Cable*1

• Quick Start Guide*1

• 2 pairs of ear tips (L/S)

Precautions for Battery

S2 is powered by a built-in rechargeable lithium battery. Please charge S2 over 1 hours before using it for your first time.

1. Only the attached Type-C cable can be used for charging battery. Incorrect charging may damage batteries and earphones.
2. Do not attempt to open rechargeable batteries or battery packs because that may break products due to the precise structure. There are also no usable parts in it.
3. Rechargeable batteries only can be recharged by adults. Keep the battery out of reach of children. If children swallowed it, please take them to the hospital immediately.
4. Keep the battery away from the fire. Do not throw the battery into the fire, otherwise it may explode. Batteries may also explode if being damaged. Please handle and disposal it according to your local conditions and regulations.

Replace Silicone Ear tips

Srhythm S2 comes with multiple pairs of ear tips, Medium size ear tips are pre-installed.

Tip: With 3 sizes of ear tips for a secure fit, get fit and sizing details for the best noise cancelling experience.

At a Glance

How to Use

Use ANC/Transparency Function

| Click the ANC Button to switch between Transparency mode, ANC mode,
and Normal Mode after powering on.
---|---

*ANC/Transparency Function can only be used in Bluetooth mode

Use Bluetooth Function

| Power ON
---|---

| Power OFF

| Play/Pause Music; Answer/End Call

| Reject Call

| Activate Voice Assistant

| Volume up

| Next Track

| Volume down

| Previous Track
5S (In pairing mode but not paired)| Delete Pairing

Function Details

a. Turn on / of

1. Press and hold the Multi-function Button for 3 seconds to turn on the Bluetooth earphone.
   Status| LED Indicator Light| Voice prompts
   ---|---|---
   Turn On| Blue light stays on for 1 second| Power On
2. Press and hold the Multi-function Button for 3 seconds to turn off the Bluetooth earphone.
   Status| LED Indicator Light| Voice prompts
   ---|---|---
   Turn Off| Red light stays on for 1 second| Power Off

b. Easy Pairing

Step 1: Press and hold the Multi-function Button for 3 seconds to turn on the Bluetooth earphone, then enter into pairing mode.
Step 2: Keep the earphone and your phone as close as possible during pairing
process.
Step 3: Turn on the Bluetooth on your phone. Search for the Bluetooth earphone signal on your phone and click on “Srhythm S2” to pair.

*Note:
The pairing mode will last for 5 minutes. If it is not connected to any device for more than 5 minutes, the Bluetooth earphone will automatically turn off.

c. Pairing to the Second Bluetooth Device

Step 1: Pair Srhythm S2 with the First device via Bluetooth successfully and then turn off the First device’s Bluetooth.
Step 2: Pair Srhythm S2 with the Second device via Bluetooth.
Step 3: Turn on Bluetooth of the First device and pair it with the earphone again.
Now both of your devices are paired with Srhythm S2 for easy switching.

d. Active Noise Cancelling (ANC)/Transparency Mode

After pairing the device, Click the ANC Button to switch between Transparency mode, ANC mode, and Normal Mode .

e. Environmental Noise Cancelling (ENC) Mode

ENC is automatically activated when you’re on a call or using your voice assistant so that your voice can be heard more clear especially when you are in the noisy environment.

f. Reset

Step 1: Press and hold the Multi-Function Button for 3 seconds to turn on Srhythm S2 until the indicator light flashing red and blue alternately into pairing mode(but not paired).
Step 2 : Press and hold “+” and “-” buttons at the same time for 5 seconds to clear the pairing history, and try to connect again.

g. Voice Assistant

Tap Multi-Function Button button 3 times in pairing mode to activate voice dialing function. After activating, short press the Multi-Function Button button to exit.

h. Charging

Connect the included Type C charging cable to a computer USB port or USB wall charger to charge the earphone under 3.7 V. It takes about 1 hour to be fully charge.

Technical Specification

• Above data are all from Srhythm laboratory and for reference only.

NOTE
Do not handle the earphones roughly. Do not press them with heavy objects. Keep away from heat and humidity.
For best performance, keep away from Wi-Fi routers and other high-frequency transmitting devices.
Please use the earphones within the effective distance of 10 meters. There should be no physical obstruction (such as a wall, etc.) between the Bluetooth device and the earphones.
The earphones can be paired with any devices that supports Bluetooth.

Attention

1. The risk of hearing loss can be reduced by observing the following safe guidelines: When connecting the earphones, adjust the volume control to the minimum, and then slowly increase to a comfortable volume level. Keep the volume as low as possible. If the volume needs to be increased, please adjust the volume control slowly. And stop using the speaker immediately if you feel unwell in the ear or if you got tinnitus. Using a high volume for a long period of time will make your ears used to such volume, causing permanent damage to your hearing even without any apparent discomfort.
2. If you are wearing a pacemaker or other electronic medical device, you should seek your doctor’s advice before using this product.
3. he packaging contains small parts that can endanger children. Therefore, it should be kept out of the reach of children. Swallowing plastic bags can cause suffocation.
4. Do not attempt to disassemble the product or insert any object into the product by yourself, otherwise it may cause a short circuit, which may lead to fire or electric shock.
5. Customer shall not replace or repair any component. Only authorized dealers or repair service center can open finished products. If any part of the product needs to be replaced for any reason (including normal wear and tear and damage or cracking), please contact the vendor.
6. Avoid rain, dampness or contact with other liquids.
7. If the product is overheating, falling or damaged, or the product falls into a medium liquid, please stop using it.
8. Using earphones while driving may be restricted by local laws. Please consult the local authority. Be careful when using this product when you need to devote yourself to something else.
9. Maintenance of built-in battery: The product is powered by rechargeable batteries. New batteries must be recharged and discharged two or three times before their full function be released. Disconnect from the charger when the battery is fully charged, as overcharging would shorten battery life. When not in use, battery in fully charged disappears slowly. Do not place the product near a heat source or expose it to direct sunlight, dust, moisture, rain or mechanical impact. Try to keep the battery temperature between 0°C and 45°C at all time. If the battery is too hot or too cold, the product may not work temporarily, even if it is fully charged.
10. Warning on battery: Improper use of batteries may result in fire or chemical burns. Batteries can explode if damaged.
11. Please refer to the User Manual for Instructions on the charging status indicator lights.
12. When unplugging the power cord or any reinforced parts, please hold the plug and pull it out instead of pulling the cord directly. Do not use the damaged charger.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>