SwitchBot Curtain 3 Automatic Curtain Opener User Manual
- June 15, 2024
- SwitchBot
Table of Contents
SwitchBot Curtain U Rail 3
User Manual
※ Please read this user manual carefully before using your device.
Package Contents
We will deliver different types and quantities of Hook Wheels according to different regions.
List of Components
Preparation
You will need:
- A smart phone or tablet using Bluetooth 4.2 or later.
- The latest version of our app, downloadable via the Apple App Store or Google Play Store.
- A SwitchBot account, you can register via our app or sign in to your account directly if you already have one.
- A fully charged SwitchBot Curtain.
|
---|---
https://apps.apple.com/cn/app/switchbot/id1087374760|
https://play.google.com/store/apps/details?id=com.theswitchbot.switchbot&hl=en
Installation
Step 1: Add your SwitchBot Curtain U Rail 3 to our app
Open our app and sign in to your account. Tap “+” at the top right- hand
corner of the home page, find the Curtain icon, and select. Then follow the
instructions to add your SwitchBot Curtain U Rail 3.
Step 2: Install SwitchBot Curtain U Rail 3 onto your curtain track
Find the best matching Hook Wheel
When you receive your device, a set of Hook Wheels will already be installed
on your Hook Pair. There are also several different- sized sets of Hook Wheels
inside the packaging to enable you to find a set that suits you best. Please
follow the steps below to find the best matching set of Hook Wheels for your
curtain track.
1. Insert the detachable Hook from the bottom gap of your curtain track and rotate it by 90″ to fit. Slide it left and right to see if it operates smoothly, then tilt it back and forth to check if it is attached to your track correctly.
- If your Hook cannot be inserted onto your curtain track, or cannot be rotated after being inserted, replace it with a smaller set of Hook Wheels.
- Try pulling your Hook towards one side and tilt it f it falls easily from the curtain track, you need to replace it with a bigger set of Hook Wheels.
If the Hook slides smoothly. You can continue the installation steps.
If you have tried with every set of Hook Wheels provided and none of them
worked as expected, please contact our customer support at support@switch-
bot.com
2. How to replace your Hook Wheels
1. Detach the existing Hook Wheels from the detachable Hook (use the Hook
Helper for an easier removal)
2. Select one set of appropriately sized Hook Wheels. Flick the two plastic
wheels to both sides to expose the metal bar in the middle. Attach a set of
Hook Wheels to the Hook as shown in the picture. You should hear a clicking
sound once it s firmly attached.
3 Repeat the same steps to replace the Hook Wheels on the other Hook
with the Main Unit.
Installing SwitchBot Curtain U Rail 3 onto your curtain track
1. Fully close your curtain, then remove the first curtain hook from the
track.
2. Insert the detachable Hook from the bottom gap of your curtain track and rotate it by 90° to fit the Hook Wheels on your track.
3 Insert the Hook with the Main Unit onto your curtain track. Pull down both
Hooks, align the snaps to attach the detachable Hook back to the Main Unit.
You will hear a clicking sound once firmly attached. The SwitchBot logo should
be facing inwards.
Installation for Special Models
If SwitchBot Curtain U Rail 3 does not fit smoothly on your curtain track,
your curtain track type may be the issue. Below are two examples of non-
standard curtain tracks. Please scan the QR code below or visit the following
website for more information.
https://support.switch-bot.com/hc/en-us/articles/1500012094841
Step 3: Install Positioning Magnet
The positioning magnet will help close your curtains tightly if your curtain
track is too slippy to run on.
To ensure the magnet firmly attaches to the track surface, please use the wet
wipe provided to clean the surface first. Dirt or dust will affect adhesion
and may cause dropping at a later time.
Installing on Regular U Rail Models
- Push your SwitchBot Curtain U Rail 3 to the fully closed position.
2. Peel off the tape liner on the back of your magnet. Point the arrow to
your curtains’ closing direction, and stick it to your curtain track surface
as shown in the picture below.
Please note: stick your magnet on the front of your curtain track, the same
side of the SwitchBot logo on your device.
3. Hang your curtain back in place and hide SwitchBot U Rail 3 behind your curtain fabric
Installing on Special U Rail Models
U rail track that is embedded in the ceiling:
1. Push your SwitchBot Curtain to the fully closed position.
2. Point the arrow to your curtains’ closing direction, and stick it to your
curtain track as shown in the picture below.
Please note: Stick your magnet to the ceiling on the same side of the
SwitchBot logo on your device. Make sure the magnet is as close as possible to
your SwitchBot Curtain’s Main Unit.
U rail track that looks like rod in shape:
1. Push your SwitchBot Curtain to the fully closed position.
2. Point the arrow to your curtains’ closing direction, and stick it to your
curtain track as shown in the picture below.
Please note: Stick your magnet on the front of your curtain track, the same
side of the SwitchBot logo on your device. Make sure the magnet is as close as
possible to your SwitchBot Curtain’s Main Unit.
Step 4: Calibration
After you have added and installed SwitchBot Curtain U Rail 3, you will need
to calibrate your device to set its route on your curtain track. Please follow
the instructions in our app to make sure that the actual movement of your
curtain is the same as the animation in the app. You can choose to recalibrate
your device or change its opening direction whenever you want by navigating to
Curtain > Settings > Calibration.
Please note: You can group two SwitchBot Curtain U Rail 3 devices together
should you plan to open your curtains from the middle. Before you calibrate,
please make sure the positions of both devices are the same as shown in our
app.
Control Methods
App Control
Open and close your curtains with just the tap of a button. We offer intuitive
app control for ios and Android users, with weekly/bi-weekly updates. OTA
firmware updates are also available to give you a better user experience.
Touch & Go
When SwitchBot Curtain U Rail 3 senses you drawing your curtain (more than 5
cm in distance), your device will automatically open or close depending on
where your device is.
Please note: you can turn this feature off in the Advanced Settings page of
your device at any time.
*5cm lowers the possibility of false triggers by foreign objects, pets, children, etc.
**Home Automation Using Voice Commands***
You can link multiple third-party smart assistants to your SwitchBot account
to control your SwitchBot Curtain U Rail 3 or trigger Scenes using voice
commands.
How to realize voice control and home automation:
- Connect your smartphone or tablet to the Internet.
- Set up a SwitchBot Hub (sold separately).
- Turn on Cloud Services via SwitchBot Curtain U Rail 3’s Settings page.
- Link third-party services to your SwitchBot account.
Using Your Device with SwitchBot Remote
A wireless remote to place anywhere,
You can also control your SwitchBot Curtain U Rail 3 using SwitchBot Remote
(sold separately) with two buttons located on the remote that can be set as an
action via our app. One Remote can also control 2 SwitchBot Curtain devices
that have been grouped. Please refer to the user manual of Remote for more
information.
Device Settings
Light Sensor (Solar Panel)
By connecting your SwitchBot Curtain U Rail 3 to the SwitchBot Solar Panel 3
(sold separately), you can set up automations based on the light level data.
The light level curve will tell you the optimal time period of sunlight in a
day and you can set the automatic charging schedule accordingly for your
SwitchBot Curtain U Rail 3.
Delay
You can set a delay for a countdown action including countdown time,
percentage of opening or closing, and Motion mode.
Schedules
You can set up to 5 Schedules locally on your device, or unlimited Schedules
when used with a SwitchBot Hub. You are able to set the day, time, percentage
of opening or closing, and Motion mode.
Charging, Firmware Upgrades, and Resetting Factory Settings
Charging
It takes about 6.5 hours to fully charge your device battery and this can last
for up to 8 months after one full charge. You may also purchase SwitchBot
Solar Panel to charge using sunlight.
- A5V=1A adapter is required to charge your device.
- Battery life s tested by opening and closing 8 kg (17 Ibs) curtains on a 3-meter-long track once a day under temperature conditions of 25 °C. Actual battery life may vary depending on different conditions.
- With only 3 hours per day exposed under sunlight that can cast clear shadow, SwitchBot Solar Panel can generate sufficient power to sustain your SwitchBot Curtain U Rail 3 forever.
The upgraded Solar Panel greatly improved efficiency even under weak sunlight. As long as your window can receive sunlight, we recommend purchasing our Solar Panel to charge your device.
This way, you can ensure that your SwitchBot Curtain U Rail 3 remains powered and ready to use whenever you need it.
Firmware Upgrades
In order to improve user experience, we will regularly release firmware
updates to introduce new functions and solve any software defects that may
occur during usage. When a new firmware version is available, we will send an
upgrade notification to your account via our app. When upgrading, please make
sure your product has sufficient battery and make sure your smartphone is
within range to prevent interference.
Resetting Factory Settings
Use the reset tool provided to press and hold the Reset button for 3 seconds
until the indicator light is visible and then release.
Specifications
Model: W2400000
Color: White
Material: ABS + PC (Anti-UV, fire-resistance rating V-0)
Size (Main Unit): 42 x 51 x 173 mm (1.7 x 2 x 6.8 in.)
Weight (Main Unit): 280 g (9.9 0z,
Power: Type-C, DC 5V=14, 3350 mAh lithium-ion battery or by Solar Panel’
Battery Life: 8 months?, or unlimited with Solar Panel
Network Connectivity : Bluetooth 5.0, long range transmission
Strength: Supports curtain of up to 16 kg (35 Ibs) (from controlled
experiments in our lab)
Max Runway: 3 m (9.8 ft.)
Schedule: Up to 5 or unlimited with a SwitchBot Hub®
Voice Control (SwitchBot Hub Required): Amazon Alexa, Google Assistant,
Siri Shortcuts, SmartThings, IFTTT
- SwitchBot Solar Panel sold separately.
- Battery life tested under conditions of opeing and closing a 8 kg (17 Ibs) curtain on a 3-meter-long track once a day at a temperature of 25 °C. Actual battery life may vary.
- SwitchBot Hub sold separately.
Please note: we recommend using your device in room temperature conditions only.
Warranty
We warrant to the original owner of the product that the product will be free from defects in materials and workmanship. Please note that this limited warranty does not cover
- Products submitted beyond the original limited warranty period.
- Products on which repairs or modifying have been attempted.
- Products subjected to falls, extreme temperatures, water, or other operating conditions outside the product specifications.
- Damage due to natural disaster (including but not limited to lightning, flood, tornado, earthquake, or hurricane, etc.).
- Damage due to misuse, abuse, negligence or casualty (e.. fire).
- Other damage that is not attributable to defects in the manufacture of product materials.
- Products purchased from unauthorized resellers.
- Consumable parts (including but not limited to batteries).
- Natural wear of the product.
Contact & Support
Setup and Troubleshooting: support.switch-bot.com
Support Email: support@switch-bot.com
Feedback: If you have any concerns or problems when using our products, please
send feedback via our app through the Profile > Help & Feedback page.
Find Out More
Please visit support.switch-bot.com for more
details.
CE/UKCA Warning
To comply with RF exposure requirements, a minimum separation distance of 20
cm must be maintained between the user’s body and the device, including the
antenna. Use only the supplied or an approved antenna. This device is in
compliance with the essential requirements and other relevant provisions of
directive 2014/53/EU. All essential radio test suites have been carried out.
CE DOC
Hereby, Woan Technology (Shenzhen) Co,, Ltd. declares that the radio equipment
type W0701600 is in compliance with Directive 2014/53/EU. The full text of the
EU declaration of conformity is available at the following internet address:
support.switch-bot.com
UKCA DOC
Hereby, Woan Technology (Shenzhen) Co., Ltd. declares that the radio equipment
type WO701600 is in compliance with UK Racio Equipment Regulations (51
2017/1206). The full text of the UK declaration of conformity is available at
the following internet address: support.switch-bot.com
“This product can be used in EU member states,
Manufacturer: Woan Technology (Shenzhen) Co., Ltd.
Address: Room 1101, Qiancheng Commercial Center, No. 5 Haicheng Road,
Mabu Community, Xixiang Subdistrict, Bao’an District, Shenzhen,
Guangdong, PR.China, 518100
Operation Frequency: Max RF output power
Bluetooth: 2402 MHz to 2480 MHz (~1.42 dBm)
FCC Warning
This device complies with Part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) This device may not cause harmful
interference, (2) This device must accept any interference received, including
interference that may cause undesired operation.
NOTE: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation.
“This equipment generates uses and can radiate radio frequency energy and, if
not installed and used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation. If this equipment
does cause harmful interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is encouraged to try
to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
NOTE: The manufacturer is not responsible for any radio or TV
interference caused by unauthorized modifications to this equipment. Such
modifications could void the user’s authority to operate the equipment.
FCC Radiation Exposure Statement
This equipment complies with FCC radiation exposure limits set forth for an
uncontrolled environment. This equipment should be installed and operated with
minimum distance 20 cm between the radiator and your body.
IC Warning
This device complies with CAN ICES-003 (B/NMB-003(8), This device complies
with Industry Canada licence-exempt RSS standard(s).
Operation is subject to the following two conditions:
(1) this device may not cause harmful interference.
(2)this device must accept any interference received, including interference
that may cause undesired operation.
IC Radiation Exposure Statement
This equipment complies with the IC radiation exposure limits established for
uncontrolled environment. This equipment must be installed and operated at
east 20 cm from a radiator or your body.
www.switch-bot.com
V1.0-2305
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>