La Crosse Technology WT-3102S Atomic Wall Clock User Manual
- June 5, 2024
- LA CROSSE TECHNOLOGY
Table of Contents
La Crosse Technology WT-3102S Atomic Wall Clock
POWER UP
- Select Time Zone and DST settings.
- Insert 1 AA battery into the Battery Compartment.
- The hands will move to the 12 o’clock position and search for the WWVB Atomic Time Signal for up to 8 minutes.
- If no signal, after 8-10 minutes, clock will run from 12:00.
- Clock will continue to search for the WWVB Atomic Time Signal. Allow up to 5 nights for the clock to receive this transmission.
- For the best reception, place the clock on an exterior wall near a window with the front or back of it facing Fort Collins, CO. Watch the setup video: bit.ly/wallclock_setup
Note: In certain areas, this clock may not be able to receive the WWVB reception due to signal strength or interference. In this case, your clock can be set manually until the Atomic Time Signal can be received.
MANUAL SET TIME
Set Time:
- Hold SET for 3 seconds to manually set your time.
- Press and hold SET again to move hands quickly.
- Press and release SET to move hands forward step by step.
Note: The Atomic Time Signal will override your manual setting if the transmission is received in the future.
- SET
- RESET
- WAVE (Atomic search)
- Battery
- Time Zone Selector
- Daylight Saving Time Selector
RESET BUTTON
- If the clock does not respond when trying to manually set your time, press the RESET button one time.
- The hands will move to the 12 o’clock position and begin searching for the WWVB Signal again.
LET’S BE SOCIAL!
Ask questions, watch detailed setup videos, and provide feedback on our social media outlets!
SPECIFICATIONS
- Battery Requirements: 1 AA (IEC LR6) required in movement Battery not included.
- Battery Life: 12 months
- Dimensions: 10” Diameter
WARRANTY INFO
La Crosse Technology, Ltd. provides a 1-year limited time warranty (from date of purchase) on this product relating to manufacturing defects in materials & workmanship. La Crosse Technology, Ltd, 2830 S. 26th St., La Crosse, WI 54601
For Full Warranty Details, Visit: www.lacrossetechnology.com/support
CARE + MAINTENANCE
Battery replacement instruction:
When batteries of different brand or type are used together, or new and old batteries are used together, some batteries may be over-discharged due to a difference of voltage or capacity. This can result in venting, leakage, and rupture and may cause personal injury.
- Always purchase the correct size and grade of battery suitable for the intended use.
- Always replace the whole set of batteries at one time, taking care not to mix old and new ones, or batteries of different types.
- Clean the battery contacts and those of the device prior to battery installation.
- Ensure the batteries are installed correctly with regard to polarity (+ and -).
- Remove batteries from product during periods of non-use. Battery leakage can cause corrosion and damage to this product.
- Remove used batteries promptly.
- For recycling and disposal of batteries, and to protect the environment please check the internet or your local phone directory for local recycling centers and / or follow local government regulations.
CA WARNING: This product can expose you to chemicals including acrylonitrile, butadiene, and styrene, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information, go to: www.P65Warnings.ca.gov
Model: WT-3102B / WT-3102S DC: 020822
For information about WWVB, Atomic Time Signal visit: bit.ly/AtomicTime
FREQUENTLY ASKED QUESTIONS
What are the standout features of the La Crosse Technology WT-3102S Atomic Wall Clock?
The La Crosse Technology WT-3102S Atomic Wall Clock features atomic timekeeping and automatic adjustment for daylight savings time, providing accurate and hassle-free timekeeping.
What type of display does the La Crosse Technology WT-3102S Atomic Wall Clock have?
The La Crosse Technology WT-3102S Atomic Wall Clock has an analog display, offering a traditional and elegant design.
What is the style of the La Crosse Technology WT-3102S Atomic Wall Clock?
The La Crosse Technology WT-3102S Atomic Wall Clock is a 10-inch silver wall clock, adding a sleek and modern touch to any room.
What are the dimensions of the La Crosse Technology WT-3102S Atomic Wall Clock?
The La Crosse Technology WT-3102S Atomic Wall Clock measures 10 inches in width and 10 inches in height, providing a noticeable presence on the wall.
What is the power source requirement for the La Crosse Technology WT-3102S Atomic Wall Clock?
The La Crosse Technology WT-3102S Atomic Wall Clock is powered by one AA battery, offering convenient and reliable battery-powered operation.
Who is the manufacturer of the La Crosse Technology WT-3102S Atomic Wall Clock?
The La Crosse Technology WT-3102S Atomic Wall Clock is manufactured by La Crosse Technology, a reputable brand known for its high-quality timekeeping products.
What is the item weight of the La Crosse Technology WT-3102S Atomic Wall Clock?
The La Crosse Technology WT-3102S Atomic Wall Clock has an item weight of 0.02 pounds, ensuring lightweight and easy installation.
What is the model number of the La Crosse Technology WT-3102S Atomic Wall Clock?
The model number of the La Crosse Technology WT-3102S Atomic Wall Clock is WT- 3102S.
What is the warranty type offered for the La Crosse Technology WT-3102S Atomic Wall Clock?
The La Crosse Technology WT-3102S Atomic Wall Clock comes with a limited warranty, providing assurance of quality and reliability.
How do I set up the La Crosse Technology WT-3102S Atomic Wall Clock?
The La Crosse Technology WT-3102S Atomic Wall Clock typically sets itself automatically once the battery is inserted. Ensure the clock is placed in an area with good reception for the atomic signal.
What should I do if my La Crosse Technology WT-3102S Atomic Wall Clock is not displaying the correct time?
If the clock is not displaying the correct time, ensure the battery is inserted correctly and replace it if needed. Move the clock to an area with better atomic signal reception.
How can I troubleshoot issues with the atomic timekeeping function on my La Crosse Technology WT-3102S Atomic Wall Clock?
If the atomic timekeeping function is not working correctly, ensure the clock is placed away from electronic devices and metal surfaces. Allow the clock to receive the atomic signal overnight for optimal synchronization.
What should I do if the clock hands on my La Crosse Technology WT-3102S Atomic Wall Clock are stuck?
If the clock hands are stuck, gently push them forward to see if they resume movement. Ensure there are no obstructions around the clock face.
How can I adjust the settings for daylight savings time on my La Crosse Technology WT-3102S Atomic Wall Clock?
The La Crosse Technology WT-3102S Atomic Wall Clock automatically adjusts for daylight savings time. If needed, manually set the clock to the correct time zone to ensure accurate timekeeping.
Why is my La Crosse Technology WT-3102S Atomic Wall Clock not displaying the correct time?
The La Crosse Technology WT-3102S Atomic Wall Clock may not display the correct time if it's not receiving the atomic signal properly. Ensure the clock is placed in an area with good signal reception, away from electronic devices and metal surfaces.
VIDEO – PRODUCT OVERVIEW
DOWNLOAD THE PDF LINK:La Crosse Technology WT-3102S Atomic Wall Clock User Manual
REFERENCE:La Crosse Technology WT-3102S Atomic Wall Clock User Manual- Device.Report