FLYCAM FLCM-QR Quick Release Adapter Plate User Guide
- June 5, 2024
- FLYCAM
Table of Contents
FLYCAM FLCM-QR Quick Release Adapter Plate
What’s In The Box
Please inspect the contents of your shipped package to ensure you have received everything that is listed below.
Quick Release Adapter Plate Setup
- Loosen the ratchet knob of the quick release adaptor and remove the quick release plate by sliding it.
- Attach the fluid head plate (Not included) onto the bottom side of the quick release adapter then tighten the screw with the help of a screw Note: You can mount it on Tripod, Rail System, Sliders, etc. We are providing 1/4″-20 threaded slots for mounting.
- Now, attached the fluid head plate (Not Included) and quick release adaptor onto the fluid head and secure it properly.
- Mount your camera on a quick release plate then tighten the screw with the help of a screwdriver.
- Now mount the quick release plate by sliding into the quick release adapter and press the side button to move the camera forward according to your requirement.
- After the camera sliding setting tightens the ratchet knob to secure it properly.
**YOUR FLYCAM QUICK-RELEASE ADAPTER PLATE IS ALL DRESSED UP AND READY TO
GO
**
SHOWN WITH OPTIONAL ACCESSORIES
Warranty
We offer one year warranty for our products from the date of purchase. Within this period of time, we will repair it without charge for labor or parts. Warranty doesn’t cover transportation costs nor does it cover a product subjected to misuse or accidental damage. Warranty repairs are subjected to inspection and evaluation by us
Liability
- We are not liable for damage caused by products that we do not supply or from mishandling in transit, accident, misuse, neglect, lack of care of the product, or service by anyone other than our company.
Contact Us
- In case of any kind of dissatisfaction, please contact us immediately and we promise our utmost support and care until you use our product.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>