obi IFD-600-002 Adaptive Eating Device User Guide

: June 5, 2024
: obi

Table of Contents

FOOD PREP
SETUP
TEACH MODE
EATING
CLEANING
CHARGING
SERVICE
Read User Manual Online (PDF format)
Download This Manual (PDF format)

obi IFD-600-002 Adaptive Eating Device User Guide

This document is NOT a substitute for the User Manual.
Read the User Manual in full before use.

FOOD PREP

SELECT FOOD

Liquids: soups, cereals, beverages
Semi-solids: oatmeals, mashed potatoes, puddings
Solids: fruits, vegetables, meats

PREPARE FOOD

Obi works best when food is prepared within the range above.
PREPARE FOOD

INSERT FOOD

Fill bowls with food. Overfilling is not recommended.
INSERT FOOD

SETUP

INSERT SWITCHES

Position the device on a stationary, dry, horizontal surface. Move the Arm to the right, as shown. Insert the desired Accessibility Switches.
INSERT SWITCHES

INSERT PLATE & PLACE MAT

Clean Plate and Spoon before ǩrst use. Insert the colored Placemat, then place the Plate on top.
PLATE & PLACE MAT

ATTACH SPOON

Attach the Spoon and press the Power Button.
ATTACH SPOON

TEACH MODE

ENTER TEACH MODE

Position the user to be upright and stationary. Press the Teach Button.
TEACH MODE

DETERMINE LOCATION

Grasp Arm with the thumb covering the Teach Icon. Lift and Press the Teach Button again to store the position.
rotate to position the spoon in front of the user’s mouth.

WARNING: CHOKING HAZARD. Do not teach a delivery position inside of the mouth.

WARNING: Risk of electrocution. Only service the device with an authorized representative.

EATING

CHOOSING FOOD

Touch the Choose Switch to move the Spoon one bowl counter clockwise.
CHOOSING FOOD

DELIVERING FOOD

Touch the Deliver Switch to scoop and transport food to the delivery location.
DELIVERING FOOD

RETURNING ARM

Touch the Deliver Switch to return the Spoon to the bowl.
RETURNING ARM

CLEANING

Clean the Plate, Placemat, and Spoon in a sink or dishwasher (top rack).
Clean Obi’s Base and Arm with a disinfectant wipe.
CLEANING

COLLISION

If the Power Button Flashes, please remove the obstructing object. Once removed, touch either switch and the Arm will resume its motion.
COLLISION

CHARGING

Connect the Charging Cable to Obi’s Charge Port and an electrical outlet. All Battery Indicator Lights will illuminate when the device is fully charged.