Artcoustic Multi Soundbar SL Owner’s Manual

www.artcoutic.com

Welcome to the world of Artcoustic!
Congratulations with your purchase of the Artcoustic SundBar SL speaker.
This multi-channel SoundBar shares many characteristics with the other models in the SL range. Maintaining Artcoustic’s clean contemporary design, the Soundbar has been designed to be mounted underneath all modern flat-screen monitors.
The Artcoustic SoundBar is perfect for the most demanding of applications. Partner it with an Artcoustic Subwoofer for a truly full-range, dynamic performance.
Wired as a single mono configuration, the Artcoustic SoundBar is a highly sensitive speaker and is therefore capable of reproducing very high sound pressure levels from modest (20watt+) amplifiers.
The Artcoustic SoundBar can be installed as a multi-channel L, C, It Speaker, as a single mono centre channel speaker, or as a high-end, high-performance stereo speaker.
Thank you for purchasing an Artcoustic product.
All the best, The Artcoustic Team

MULTI SL FEATURES
High-Frequency Driver: Dual Ring Radiator diaphragm with highly linear suspension and low loss surrounds for high clarity and clean transient response. Copper caps for better HF extension and lower distortion and wave- guide center plug, copper-clad all wire.
Woofer: Extra-long excursion and aluminum Shod Circuiting Ring, 4-layer voice coil, anodized aluminum for improved heat dissipation, combined with Distortion Reduced Motor.
Crossover: 6 dB/octave low pass and 12 dB/octave high pass filter.
The design features
a Low resonance baffle. exceptional low mounting depth combined with very high SPL and dynamic range.

• Symmetrically Controlled Beamwidth
• Configured as mono or stereo left, center and right speaker
• Very low distortion V
• ery low power consumption
• Wide frequency response 60Hz to 40kHz
• Fast, easy, and simple installation
• Suitable for a wide range of applications, from HiFi Systems, Home Cinemas, Screening Rooms and smaller commercial applications
• Ultra-slim aesthetically pleasing cabinet design, designed to complement the latest LED and projection screen designs

Specifications C-1 SL

Transducer: LF-MF 2 x 3 inch cone HF I x 1 inch Dual Ring Radiator
Crossover: Low Pass Niter 6 dB/octave 1000 Hz High Pass 12 dB/octave 4000Hz
Connection: Bi-omped Gold Plated Push Terminals
Performance. Operating Ronge 70 Hz (-3dB) to 40 kHz Nominal Beomwidth Horizontal 90° Vertical 90° Sensitivity 1 Watt €■ 6 ohm 89 dB Full Space. 91 dB Half Space Long Term SPL 60 Watt 103 dB Full Space, 106 dB Half Space Short Term (Damage) SPL 110 watt 106 dB Full Space, 109 dB Holf Space Input Impedance Nominal Minimum 6 ohms Recommended high pass filter 100 Hz 24 dB / Octave
Weight 2.7 kg Dimensions H: 100 W: 400 D: 61 mm
Finish:
Cabinet: Black, White, RAL, NCS, likkurila. Gloss Screen: Black, White. Pantone

Specification Soundbar C-2/Stereo 1094 SL
Transducer:
LF-MF 4 x 3-inch cone
HF 2 x 1-inch Dual Ring Radiator
Crossove•
Low Pass Filter 6 dB/octave 1000 Hz High Pass 12 dB/octave 4000Hz
Connection:
Bi-amped Gold Plated Push Terminals
Performance:
Operating Range 70 Hz (-3dB) to 40 kHz Nominal Beamwidth Horizontal 90° Vertical 90° Sensitivity 1 Watt 12 ohm 88 dB Full Space, 91 dB Half Space Long Term SPL 60 watt 103 dB Full Space. 106 dB Half-Space Short Term (Damage) SPL 100 watt 105 dB Full Space. 108 dB Half Space
Input Impedance Nominal Minimum 12 ohms Mono.
6 ohms
Recommended high pass filter 100 Hz 24 dB / Octave
Weight 4.5 kg
Dimensions H: 100 W: 1094 D: 61 mm
Finish:
Cabinet: Black, White, RAL, NCS, Tikkurila, Gloss Screen: Black. White, Pantone
Specification Soundbar C-2/Stereo 1449 SL
Transducer
: LF-MF 4 x 3-inch cone HF 2 x I inch Dual Ring Radiator
Crossover:
Low Pass Filter 6 dB/octave 1000 Hz High Poss 12 dB/octave 4000Hz
Connection: 8i-amped Gold Plated Push Terminals
Performance:
Operating Range 70 Hz (-3dB) to 40 kHz Nominal Beamwidth Horizontal 90° Vertical 90° Sensitivity I Watt 12 ohm 88 dB Full Space. 91 dB Holt Space long Term SR 60 Watt 103 dB Full Space. 106 dB Half-Space Short Term (Damage) SPL 100 watt 105 dB Full Space. 108 dB Half Space
Input Impedance Nominal Minimum 12 ohms Mono. 6 ohms Recommended high pass filter 100 Hz 24 dB / Octave
Weight 6.5 kg Dimensions H: 100 W: 1449 0: 61 mm
Finish:
Cabinet: Black, White. RAL, NCS. Tikkurila, Gloss Screen: Black. White. Pantone
Specification Soundbar C-2/Stereo 1227 SL
Transducer:
LF-MF 4 x 3-inch cone HF 2 x 1-inch Dual Ring Radiator
Crossover :
low Pass Filter 6 dB/octave 1000 Hz High Pass 12 dB/octave 4000Hz
Connection:
Bi-amped Gold Plated Push Terminals
Performance: Operating Range 70 Hz (-3d111 to 40 kHz Nominal Beamwidth Horizontal 90° Vertical 90° Sensitivity 1 Wott Q 12 ohm 88 dB Full Space. 91 dB Half Space Long Term SPL 60 Watt 103 dB Full Space, 106 dB Half-Space Short Term IDamage) SPL 100 watt 105 dB Full Space, 108 dB Half Space
Input Impedance Nominal Minimum 12 ohms Mono. 6 ohms Recommended high pass filter 100 Hz 24 dB / Octave
Weight 5.5 kg Dimensions H: 100 W: 1227 D: 61 mm
Finish: Cabinet: Block, White. RAL, NCS. Tikkurila, G1OSS Screen: Black. White, Pantone
Specification Soundbar C-2/Stereo 1672 SL
TWITSCIUM: LF-MF 4 x 3-inch cone HF 2 x 1-inch Dual Ring Radiator
Crossover. Low Pass Filter 6 dB/octave 1000 Hz High Pass 12 dB/octave 4000Hz
Connection: Bi-amped Gold Plated Push Terminals
Performance:
Operating Range 70 Hz (-3dB) to 40 kHz Nominal Beamwidth Horizontal 90° Vertical 90° Sensitivity 1 Watt @ 12 ohm 88 dB Full Space, 91 dB Half Space Long Term SPL 60 Watt 103 dB Full Space, 106 dB Holf Space Short Term (Damage) SPL 100 waft 105 dB Full Space, 108 dB Half Space
Input Impedance Nominal Minimum 12 ohms Mono. 6 ohms Recommended high pass filter 100 Hz 24 dB / Octave
Weight 7.5 kg Dimensions H: 100 W: 1672 D: 61 mm
Finish: Cabinet: Black. White, RAL, NCS, likkurila Gloss Screen: Block, White, Pantone

Specification Multi Soundbar 1094 SL
Transducer:
LF-MF 6 x 3 inch cone HF 3 x 1 inch Dual Ring Radiator
Crossover Low Pass Filter 6 dB/octave 1000 Hz High Pass 12 dB/octave 4000Hz
Connection:
Bi-amped Gold Plated Push Terminals
Performance:
Operating Range 70 Hz (-3dB) to 40 kHz Nominal Beamwidth Horizontal 90° Vertical 90° Sensitivity 1 Watt @ 12 ohm 88 dB Full Space, 91 dB Half-Space Long Term SPL 60 Watt 103 dB Full Space, 106 dB Half-Space Short Term (Damage) SPL 100 watt 105 dB Full Space, 108 dB Half Space
Input Impedance Nominal Minimum 12 ohms Mono. 4 ohms Recommended high pass filter 100 Hz 24 dB / Octave
Weight 5 kg Dimensions H:
100 W: 1094 D: 61 mm
Finish: Cabinet: Black, White, RAL, NCS, Tikkurila, Gloss Screen: Block, White, Pantone
Specification Multi Soundbar 1449 SL
Transducer:
LF-MF 6 x 3-inch cone HF 3 x 1-inch Dual Ring Radiator
Crossover:
Low Pass Filter 6 dB/octave 1000 Hz High Pass 12 dB/octave 4000Hz
Connection:
Bi-amped Gold Plated Push Terminals
Performance:
Operating Range 70 Hz (-3dB) to 40 kHz Nominal Beamwidth Horizontal 90° Vertical 90° Sensitivity 1 Watt @ 12 ohm 88 dB Full Space, 91 dB Half-Space Long Term SPL 60 Watt 103 dB Full Space, 106 dB Half-Space Short Term (Damage) SPL 100 watt 105 dB Full Space, 108 dB Half Space
Input Impedance Nominal Minimum 12 ohms Mono. 4 ohms Recommended high pass filter 100 Hz 24 dB / Octave
Weight 7 kg
Dimensions H: MO W: 1449 D: 61 mm
Finish: Cabinet: Black, White, RAL, NCS, Tikkurila, Gloss Screen: Black, White, Pantone

Specification Multi Soundbar 1227 SL
Transducer:
LF-MF 6 x 3 inch cone HF 3 x 1 inch Dual Ring Radiator
Crossover. Low Pass Filter 6 dB/octave 1000 Hz High Pass 12 dB/octave 4000Hz
Connection: Bi-amped Gold Plated Push Terminals
Performance: Operating Range 70 Hz (-3dB) to 40 kHz Nominal Beamwidth Horizontal 90° Vertical 90° Sensitivity 1 Watt @ 12 ohm 88 dB Full Space, 91 dB Half Space Long Term SPL 60 Watt 103 dB Full Space, 106 dB Half Space Short Term (Damage) SPL 100 watt 105 dB Full Space, 108 dB Half Space
Input Impedance Nominal Minimum 12 ohms Mono. 4 ohms Recommended high pass filter 100 Hz 24 dB / Octave
Weight 6 kg Dimensions H:
100 W: 1227 D: 61 mm
Finish:
Cabinet: Black, White, RAL, NCS, Tikkurila, Gloss Screen: Black, White, Pantone
Specification Multi Soundbar 1672 Si.
Transducer: LF-MF 6 x 3 inch cone HF 3 x I inch Dual Ring Radiator
Crossover: Low Pass Filter 6 dB/octave 1000 Hz High Pass 12 dB/octave 4000Hz
Connection: Bi-amped Gold Plated Push Terminals
Performance: Operating Range 70 Hz (-3dB) to 40 kHz Nominal Beamwidth Horizontal 90° Vertical 90° Sensitivity 1 Watt @ 12 ohm 88 dB Full Space, 91 dB Half Space Long Term SPL 60 Watt 103 d8 Full Space, 106 dB Half Space Short Term (Damage) SPL 100 watt 105 dB Full Space, 108 dB Half Space
Input Impedance Nominal Minimum 12 ohms Mono. 4 ohms Recommended high pass filter 100 Hz 24 dB / Octave
Weight 8 kg Dimensions H: MO W: 1672 D: 61 mm
Finish: Cabinet: Black, White, RAL, NCS, Tikkurila, Gloss Screen: Black, White, Pantone

Specification Multi Soundbar 1904 SL
Transducer: LF-MF 6 x 3 inch cone HF 3 x 1-inch Dual Ring Radiator
Crossover Low Pass Filter 6 dB/octave 1000 Hz High Pass 12 dB/octave 4000Hz
Connection: Bi-amped Gold Plated Push Terminals
Performance: Operating Range 70 Hz (-3dB) to 40 kHz Nominal Beamwidth Horizontal 90° Vertical 90° Sensitivity 1 Watt @ 12 ohm 88 dB Full Space, 91 dB Half-Space Long Term SPL 60 Watt 103 dB Full Space, 106 dB Half-Space Short Term (Damage) SPL 100 watt 105 dB Full Space, 108 dB Half Space
Input Impedance Nominal Minimum 12 ohms Mono. 4 ohms Recommended high pass filter 100 Hz 24 dB / Octave
Weight 10 kg Dimensions H: 100 W: 1904 D: 61 mm
Finish: Cabinet: Black, White, RAL, NCS, Tikkurila, Gloss Screen: Black, White, Pantone

HSPL Soundbar SL
Multi Soundbar SL high sound pressure level version. This SoundBar version has been specially designed and Engineered for applications where very high sound pressure levels are required, matching the larger Artcoustic speaker models, such as the 12-6, 16-8 and 24-12 SL mdels
Specification HSPL Soundbar SL
Transducer: LF-MF 12 x 3 inch cone. Symmetric Phase Aligned HF 6 x 1 inch Dual Ring Radiator, Symmetric Phase Aligned
Crossover: Low Pass Filter 6 dB/octave 1000 Hz High Pass 12 dB/octave 4000Hz
Connection: Bi-amped Gold Plated Push Terminals
Performance: Operating Range 70 Hz (-3dB) to 40 kHz Nominal Beamwidth Horizontal 90° Vertical 90° Sensitivity 1 Watt @ 13 ohm 91 dB Full Space, 94 dB Half Space Long Term SPL 120 Watt 111 dB Full Space, 114 dB Half Space Short Term (Damage) SPL 200 watt 114 dB Full Space, 117 dB Half Space
Input Impedance Nominal Minimum 12 ohms Mono. 6 ohms Recommended high pass filter 100 Hz 24 dB / Octave
Weight BESPOKE Dimensions H: 100 W: BESPOKE D: 71 mm
Finish: Cabinet Black, White, RAL, NCS, Tikkurila, Gloss Screen: Black, White, Pantone

ACOUSTIC UNIVERSEL VESA MOUNT

SAFETY INSTRUCTIONS

SAFETY:

1. Do not use this product near water.
2. Clean panel only with dry cloth.
3. Do not install near any heat sources, such as radiators, heat registers. stoves.

Refer all servicing to qualified service personnel. Servicing is required when the product has been damaged in any way, liquid has been spilled or objects have fallen into the product, the product has been exposed to rain or moisture. does not operate normally or has been dropped.
WARNING: To reduce the risk of fire and electric shock do not expose this product to rain or moisture.

1. Do not place objects filled with liquids such as vases on the product.
2. Do not open product. There are no user-serviceable parts inside.

This product complies with Part 15 of the FCC Rules. Its operation is subject to the following two conditions: This dproduct may not cause harmful interference. This product must accept any interference received. including interference that may cause undesired operation. Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
WARRANTY:
Is valid only for products purchased from an authorized Artcoustic retailer or dealer. Is valid from the date of purchase for a period of 3 years for passive loudspeakers, one year for powered loudspeakers and electronics. Is limited to the repair of the equipment (which could be a repair or replacement at our discretion, neither of which affects your original warranty). Neither transportation nor any other costs. nor any risk for removal, transportation and installation of products is covered by this warranty. Is only valid for the original owner. It is not transferable. Will not be applicable in cases other than defects in materials and/or workmanship at the time of purchase and will not be applicable:
For deterioration of component parts. the nature of which is to become worn or depleted with use, such as batteries. For damages caused by incorrect installation, connection or pocking. For damages caused by any use other than correct use described in the user manual, negligence, modifications, or use of parts that are not mode or authorized by Artcoustic UK Ltd. For damages caused by faulty or unsuitable ancillary equipment For damages caused by accidents, lightning, water, fire heat, war, public disturbances or any other cause beyond the reasonable control of Artcoustic UK Ltd and its appointed distributors. If it is found necessary to return the product for repair, you may be given a Return Merchandise Authorisation. You should not return the product without this authorization if given. To validate your warranty, you will need to produce the original sales invoice or other proof of ownership and dote of purchase.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>