MINGDA Magician Max 3D Printer User Manual

Magician Max
3D Printer User Manual

The Main Parts of the Machine

Gantry| The Main Chassis

Toolkit

Assemble the 3D Printer

Step 1 Install the gantry

Note: In order to avoid bending the lead screw and affecting the printing effect, do not touch the lead screw or twist the lead at will when taking out the gantry.

Step 2 Install the fixing plate screw

Step 3 Install the Filament Holder

The filament holder can be installed left and right

Step 4 Cable connecting

Platform Line| Z Motor 1| Z Motor 2

Step 4 Cable connecting

X Limit| X Motor| Arranging Wires

Leveling

Plug in the power cord and turn on the power.| Click the “ABL” button| The system will automatically level after heating

Note: The UI information is only for reference, the actual UI may be different.

Preheat

Select the preheat button on the main interface| Click the PLA button for one- key heating

Note: The UI information is only for reference, the actual UI may be different.

Insert the filament

1. Note: Click Load to feed the material, and we suggest that don’t click
Upload to pull the filament because it may make the extruder be blocked| 2. Insert SD card

Printing

Note: The UI information is only for reference, the actual UI may be different.

Baby Step

After the leveling is completed, when the first layer is printed, adjust the Baby Step value appropriately according to the adhesion of the printing consumables and the glass platform. After the adjustment is completed, the settings are saved, and there is no need to adjust again in the next printing.

Note: The UI information is only for reference, the actual UI may be different.

Software Installation and Use

Magician Max 3D printers work with a variety of slicing software, such as Cura, Simplify 3D, Repetier-Host and so on. Now we will introduce CURA_4.9.0 in detail, you can learn how to set the printing parameters, which will help you to become more familiar with the slicing software and print the first sample successfully. First, you can find the CURA_4.9.0 from the SD card, and install it on your computer.
Install CURA

1. Double click Cura_4.9.0.exe to install
2. Install the software by default as follows.

Step 1 Add Printer

|

Schritt 1 Drucker hinzufügen

---|---

Click Add printer| Choose Custom[Custom FFF printer ], insert Printer name for example Magician Max, and Click Add

Insert print size, X320 Y320 Z400, select Heated bed| Click Extruder 1, nozzle size 0.4mm, Compatible material diameter 1.75mm, Click next

Step 2 Import Configuration file
Click Preferences, Configure Cura…

Click Profiles, Import, Choose PLA+.curaprofile in SD card

After Import the profile, you will see it below, choose PLA+, and click Activate| On the right side you can see PLA+ active

Click here, you can check all the parameters, when you move the mouse on it will show the explanation to help you under more clearly| Step 3 Slicing
Click the load button you can load an stl file, you can move, rotate, and Zoom the model. Click the Slice button.

1. After the slice is completed, you can see the time and weight of material that the printing will take;
2. We suggest you click PREVIEW to check, you can choose line Type and Drag the slider on the right side to see the printing process clearly.
   After that, you can save it on your SD card to print it out by the printer.

For a detailed warranty policy, please visit
http://www.3dmingda.com/single/request_after_sales_service.html
For support,please visit our Youtube Channel
https://www.youtube.com/channel/UC6PO64H7CfQtBy4H-fSRM4A?view_as=subscriber
Or you can visit our Facebook group at
https://www.facebook.com/groups/1018823731846578

| |
---|---|---
https://www.youtube.com/channel/UC6PO64H7CfQtBy4H-fSRM4A?view_as=subscriber| https://www.facebook.com/groups/1018823731846578/about| http://www.3dmingda.com

Shenzhen MINGDA Technology Co.,LTD
Email: [email protected]
www.3dmingda.com

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>