MINGDA Magician Pro 3D Printer with Huge Build Volume Instruction Manual

: June 9, 2024
: MINGDA

Table of Contents

Accessories
Assemble
Auto-leveling
Preheat
Insert the filament
Printing
Z-offset adjust
Software Instructions
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

MINGDA Magician Pro 3D Printer with Huge Build Volume Instruction Manual

Accessories

Gantry

The Main Chassis

Accessories

Toolkit

Filament
User manual
Filament hold
Nozzle
SD card
Wrench
Allen wrench
Teflontube
Power cable
M5*8 (2pcs)
M5*10 (6pcs)
M3*8 (2pcs)

Assemble

Step 1 Install the gantr

Assemble Instruction

Note: To avoid bending the lead screw and effect the printing model, don’t touch or twist the lead screw when take out thegantry from the package

Step 2 Install the fixing plate screw

Assemble Instruction

Step 3 Install the Filament Holder

The filament holder can be installed left and right

Assemble Instruction

Step 4 Cable connecting

Hotbed cable
Z Motor cable
Filament detecto
Arranging Wire

Note: If you find there is a little shaking on extruder,bed or X-axis, don’t worry, this is caused by long-term transportation. Please refer tothe adjustment video link in the SD card to adjust, it is helpful

Auto-leveling

Plug in the cable and turn on the power
Click “Leveling” on main interface
The printer will start auto-levelingafter preheat.

Note: The UI information is only for refernece, the actyal UI may be different .

Preheat

Click “preheat” on the main interface
According to your filament, select appropriate settings

Note: The UI information is only for refernece, the actyal UI may be different .

Insert the filament

In order to feed filament smoothly, Please keep the end of the filament at 45°.
Click “load” to feed the filament until the filament is out of nozzle.
Insert SD card

Printing

Select a gcode file to print

Note: The UI information is only for refernece, the actyal UI may be differ

Z-offset adjust

When you start your first printing,adjust the Babystep value according to the adhesion of the filament and the glass platform. Click “Save”tosave your setting, and you don’t need to adjust the value again next time
Z offset adjust

If the distance between the nozzle and the platform is too high, the filament will not easy to stick to the platform. Should click “Decrease” until the distance is proper
Z offset adjust

Keep the distance between the nozzle and the hot bed at 0.1mm, the filament will stick to the hot bed evenly

If the distance between the nozzleandtheplatform is too low, the filament will benoteasy to feed out smoothly . Shouldclick”Increase” until the distance is proper.
Z offset adjust

Software Instructions

Magician Pro works with a variety of slicing software, such as Cura, Simplify 3D, Repetier-Host, and more. We will introduce CURA_xx.xx in detail, and you will learn how to set the slicing parameters, which will help you become more familiar with the slicing software and print your first model successfully.

First, you can find the CURA_xx.xx from the SD card, and install it on your computer.

Install CURA

Double click Cura_xx.xx.exe to install
Install the software by default as follows.

Step 1 Add Printer

Click Add printer
Choose Custom[Custom FFF printer ], insert Printer name for example Magician Pro,and Click Add

Insert print size, X400 Y400 Z400, select Heated bed
Click Extruder 1, nozzle size 0.4mm, Compatiblematerial diameter 1.75mm, Click next

Step 2 Import Configuration file

Click Preferences, Configure Cura…

Click Profiles, Import, Choose PLA+.curaprofile in SD card

After Import the profile, you will see it below, choose PLA+, and click Activate
On the right side you can see PLA+ active

Click here, you can check all the parameter, when you move mouse on it will show the explanation to help you under more clearly
Step 3 Slicing
Click load button you can load a stl file, you canmove, rotate, and Zoom the model. Click Slice button

After slice completed, you can see the time and weight of material that the printing will take;
We suggest you click PREVIEW to check, you can choose line Type and Drag the slider on the right side to see the printing process clearly. After that , you can save it in your SD card to print it out by the printer.