NETGEAR AXM765v2 1000base-T SFP+ Module Installation Guide
- June 5, 2024
- NETGEAR
Table of Contents
Installation Guide
1000BASE-T SFP+ Module
Model AXM765v2
The AXM765v2 SFP+ module is a low-power, high-performance, 1000BASE-T
transceiver.
The AXM765v2 delivers 10 Gb network connectivity with cabling up to 262.5 feet
(80 meters) of Category 6a (Cat 6a) or Cat 7 Ethernet cable.
The module is compatible with the IEEE 802.3az/an standard.
The switch automatically detects the module, so you can simply plug it into an
available module slot. You can insert or remove the module while the switch is
operational.
Install the Module
Insert the module firmly into a slot that supports the SFP+ interface. Make
sure that the cable you use is a Category 5e (Cat 5e) or a higher-rated
Ethernet cable (Cat 6,
Cat 6a, or Cat 7). Supports links up to 80m using Cat 6a/7 Cable. 
Remove the Module
- Lower the latch on the front of the module.
- Grasp the sides of the module and pull it straight forward out of the slot.
Technical Specifications.
| Standards | IEEE 802.3an, IEEE 802.3az, SFF-8431 and SFF-8432 MSA-compliant |
|---|---|
| Dimensions (H x W x D) | 0.54 in. x 0.54 in. x 2.71 in. |
(13.8 mm x 13.7 mm x 68.8 mm)
Weight| 0.5 oz (14.17 g)
Operating temperature| 32–158ºF (0–70ºC)
humidity| 85% at 77ºF (25ºC)
Operating distance| 10GBASE-T up to 262.5 ft (80 m) with Cat 6a (or higher
rated) Ethernet cable
Connectors| RJ45
Power consumption| 2.5W
Safety certification| IEC/EN 60950-1, UL60950
Environmental compliance| RoHS
Support and Community
Visit netgear.com/support to get your questions answered and access the latest
downloads.
You can also check out our NETGEAR Community for helpful advice at
community.netgear.com.
Regulatory and Legal
(If this product is sold in Canada, you can access this document in Canadian
French at https://www.netgear.com/support/download/.)
For regulatory compliance information including the EU Declaration of
Conformity, visit https://www.netgear.com/about/regulatory/.
See the regulatory compliance document before connecting the power supply.
For NETGEAR’s Privacy Policy, visit https://www.netgear.com/about/privacy-
policy.
By using this device, you are agreeing to NETGEAR’s Terms and Conditions at
https://www.netgear.com/about/terms-and-conditions. If you do not agree,
return the
device to your place of purchase within your return period.
© NETGEAR, Inc., NETGEAR and the NETGEAR Logo
are trademarks of NETGEAR, Inc. Any non‑NETGEAR
trademarks are used for reference purposes only.
January 2022
NETGEAR INTERNATIONAL LTD
NETGEAR, Inc.
350 East Plumeria Drive
San Jose, CA 95134, USA
Floor 1, Building 3
University Technology Centre
Curraheen Road, Cork,
T12EF21, Ireland
References
- English - NETGEAR Communities
- NETGEAR Support | NETGEAR
- NETGEAR Terms and Conditions | NETGEAR
- Download Center | Downloads and Documentation | NETGEAR