KOODUU Nordic Light PRO Table Bluetooth Speaker and Oil Lamp Instruction Manual
- June 5, 2024
- Kooduu
Table of Contents
Nordic Light PRO Table Bluetooth Speaker and Oil Lamp
Instruction Manual
DO NOT TOUCH THE FLAME|
---|---
DO NOT PLACE ANY ITEMS ON THE FLAME|
DO NOT POSITION NEXT TO COMBUSTIBLE ITEMS|
ARDP SUITABLE EXTINGUISHING AGENT READY|
KEECHOKING HAZ|
WARNING: DO NOT SWALLOW LAMP OIL|
WARNING: FLAMMABLE FUEL HANDLE WITH CARE|
READ NC AND FOLLOW THE INSTRUCTIONS|
Table Bluetooth Speaker and Oil Lamp
Model: Nordic Light PRO
Operating manual
Version 1.0 2019
Introduction
Dear Customer. Thank you for purchasing our Kooduu Nordic Light PRO. We hope
you enjoy listening to your favorite tunes whilst enjoying the calmness of the
flames.
This product complies with the statutory national and European requirements.
To maintain this status and to ensure safe operation, you as the user must
observe these operating instructions!
These operating instructions are part of this product. They contain important
notes on commissioning and handling. Also, consider this if you pass on the
product to any third party. Therefore, retain these operating instructions for
reference!
All company names and product names are trademarks of their respective owners.
All rights reserved.
Intended use
This Nordic Light PRO is intended to be used as a lifestyle product. The product serves as a multifunctional speaker, oil lamp, and/or tea light. Its top chamber can be used with the Kooduu Oil Refill Cartridge. Any use. other than described above, can damage the product. Additionally. this is connected to dangers, such as short circuits, fire, electric shock, etc. No part of this product must be modified or converted! Read these operating instructions completely and attentively; they contain important information on setup, function, and operation. Always observe the safety information!
Box contents
- Table Bluetooth Speaker and Oil Lamp
- Operating Manual
- USB cable & Unlock key
- Oil Cartridge Cover
- Glass Shade
Safety Information
The warranty/guarantee will expire if the damage is incurred resulting from
non-compliance with these operating instructions. We do not assume any
liability for consequential damage, nor do we assume any liability for damage
to property or personal injury caused by improper use or failure to observe
the safety information. In such cases, the guarantee/warranty will expire!
The following safety information Is intended not only for the protection of
your health but also for the protection of the device. Please read the
following carefully:
The unauthorized conversion and/or modification of the product is inadmissible
for safety and approval reasons.
The product is only suitable for dry areas. Do not expose it for long periods
of time to direct sunlight, heat, cold, dampness, or wetness: otherwise, it
may cause damage to the product.
There is a danger of fire or potentially fatal electric shock. If this is the
case. first power down the respective socket (e.g. switch off the circuit
breaker) and then pull the power adaptor from the socket. Disconnect all
cables from the device. Do not operate the product anymore afterward, but
contact your local dealer or get in touch with us at https://www.kooduu
.comireturn-policy/
Handle the product with care. It can be damaged by impact, blows or when
dropped even from a low height.
This product is not a toy and is not suitable for children. Children cannot
judge the dangers Involved when handling electrical devices. Do not leave
packing material unattended. It may become a dangerous toy for children. Also,
observe the safety and operating instructions of any other devices that you
connect to the speaker. Please follow the national and local regulations when
using this product.
This product is only to be used with the designated oil: the “Kooduu Refill
Cartridge’
This product is only to be used on a stable, level surface.
This product is not intended to be used by persons (including children) with
reduced physical, sensory or mental capabilities, or lack of experience and
knowledge unless they have been given supervision or instructions concerning
the use of the product by a person that is responsible for their safety.
This product is not to be used as a heating appliance.
This product is not to be used when it is fallen if there are any signs of
damage or when it leaks.
This product is not to be used near direct heat sources. This product is not
to be used without supervision. Do not change the construction of this
product.
Do not put any flammable items on this product, other than the intended Kooduu
oil refill cartridge.
Do not use spare parts other than recommended by the manufacturer, these can
cause injuries and will invalidate any warranty that you may have.
This product has to be cooled down before removing or replacing (spare) parts.
All repairs should be made by a competent qualified repair service (‘).
By ignoring the safety instructions the manufacturer cannot be held
responsible for any damage.
Risk of injury/damage
Keep the packaging of the product out of children’s reach. There is a danger
of suffocation.
Keep children and pets away from refill cartridges and the product.
Be sure to follow the notices on the refill cartridges.
The refill cartridge is not suitable for drinking. If ingested, please seek
medical attention immediately and present the package label. If the oil is
spilled on a wooden floor or a piece of furniture, it may leave marks.
Do not prepare food over the flame
Do not burn other material over the flame.
The glass and the metal parts of this product are not to be touched with your
bare hands, because these surfaces will become hot during use and also remain
hot for some time after the flame has been extinguished. Do not touch the
product until it is completely cooled off.
Please check the glass before installation; if there’s dust inside the glass
or the edge is chipped do not use the product. Fire hazard
Do not extinguish the fire with water Do not place any foreign objects on or
in the product. Do not cover or plug the vents of the product. Do not fan the
flame (e. g. using a hairdryer). Do not smoke, eat or drink while replacing
the refill cartridge of the product. This product is not to be moved when in
use or when loaded with an oil refill cartridge. When oil is spilled on or
next to the product, wipe it off immediately and then use water to wipe the
affected area again so there is no risk of accidental ignition. Despite all
safety precautions, if a fire breaks out, you could use an alcohol-resistant
foam or carbon dioxide as extinguishing agents. At all times keep an adequate
extinguisher at hand close to the product.
Product overview
Function Keys & Bottom
Al On/Off switch
A2 USB charging port
Charging
61 Security cover
B2 USB cable
B3 Key
Assembly Parts
C1 Glass Shade
C2 Cartridge Cover
C3 Kooduu Refill Cartridge (not included in the package)
LED Indicator
D1 Charging LED
D2 Mode LED
6. Access your Nordic Light PRO operating area.
Step 1 : Use the Magnetic Key to open the Security panel by placing it in
the center of the panel.
Step 2: Slowly pull away and downwards and let the cover hang freely.
7. Setup mono speaker (single-unit) connection.
Step 1: Before first use, turn off the Bluetooth function of any other
Bluetooth device near the speaker.
Step 2: Press the On/Off key for about 3 seconds on the unit. You will
hear a start-up sound and the blue LED indicator light will fast flash.
Step 3: Now turn on “Bluetooth” on your mobile phone and search for
Nordic Light PRO on discoverable devices In your Bluetooth menu and pair with
the unit.
Step 4: You will be prompted for a code. The code is “5 6 3 8”
Step 5: After you hear the connection sound “beep” the product is
successfully paired. This can be confirmed by the CONNECTED sign/wording on
your smart device.
Step 6: The Blue indicator light will become solid Blue. You can now play
your favorite music.
8. Volume settings
In order to adjust the volume using the connected smart device to adjust the
volume up or down.
9. Pairing to new phone
If you need to pair the speaker to a new device, you need first turn off the
Bluetooth on the connected phone. Wait for 5 seconds and then connect with the
new device.
10. Turn off the Nordic Light PRO
To turn off the product press and hold the on/off button until the LED light
turns off. You will hear a short melody, indicating that the device is now
OFF.
11. Setup multiple speaker connections
If you have multiple Kooduu products you want to pair, make sure to follow
these instructions.
Step 1: Before first use, turn off the Bluetooth function of any other
Bluetooth device near the speaker.
Step 2: Press the On/Off key for about 3 seconds on the unit. You will
hear a start-up sound and the blue LED indicator light will fast flash.
Step 3: Choose the unit that will be the “Master
Step4: Double press the “Masters° ON/OFF button — the blue LED will now
flash slower.
Step5: Choose the next “Follower” unit to connect.
Step 6: Single press the “Follower’s” ON/OFF button—the blue LED will now
turn off.
Step 7 : Let the “Follower” automatically connect to the “Master speaker.
You will hear a “beep” tone once the connection between the ‘Follower” and the
“Master” speaker is successfully made.
Repeat from step 5- to Step 7 with all the “Followers” you wish to pair to
the “Master.
Step8: In order to finalize the pairing, double press the “Master’s”
ON/OFF button — the blue LED will now flash quickly again.
DO NOT PRESS ANY OF THE “FOLLOWER” UNITS ON/OFF BUTTONS.
Step 9: The “Master” unit is now visible for Bluetooth pairing.
Step 10: Enter the Bluetooth menu on your smart device or computer and
start pairing with Nordic Light PRO “Master”.
Step 11: You will be prompted for a code. The code is “5 6 3 8”
Step 12: After you hear the connection sound “beep” the product is
successfully paired. This can be confirmed by the CONNECTED sign/wording on
your smart device.
The LED of the “Master” is now solid Blue.
Once all units have been paired the settings will be remembered and next time
the units are turned on, they will “automatically” pair to the previous
settings.
NOTE: If you do not finalize the pairing by double-pressing the
“Master’s” ON/OFF; no successful Bluetooth connection can be established. The
“Master’s” Bluetooth will be visible on your smart device, but no connection
is possible.
12. Adding more “Follower” units to an existing multi-system:
Step 1: Locate the “Master” unit.
Step 2: Double press the “Master” (while the unit is on).
Step 3: Choose the next “Follower” unit to connect to.
Step 4: Single press the “Follower’s” ON/OFF button — the blue LED will
now turn off.
Step 5: Let the “Follower” automatically connect to the “Master” speaker.
You will hear a “beep” tone once the connection between the “Follower” and the
“Master” speaker is successfully made.
Step 6: In order to finalize the pairing, double press the “Master’s”
ON/OFF button — the blue LED will now flash quickly again and you can now
connect a smart device or laptop to the master as described in section 11,
step 9.
DO NOT PRESS ANY OF THE EXISTING “FOLLOWER” UNITS ON/OFF BUTTONS.
13. LED indications and Button Press functions. 14.Reset the Nordic Light PRO
LED STATUS | MODE |
---|---|
Fast blue flashing | The product is in Bluetooth pairing mode |
Slow blue LED flashing | The product is in “Master” mode — waiting to pair with |
“Follower units
Solid blue LED| The product is paired by Bluetooth with a smart device
Product is on — NO blue LED| The product is in “Follower” mode — waiting to
pair with the “Master” unit
2nd LED is RED| The product is connected with a USB charger and is charging
2′ LED is Green| The product is connected with a USB charger and is fully
charged
Current MODE| MODELED indicator| Button Press| New MODE|
MODELED indicator
---|---|---|---|---
OFF| N/A| 2 seconds long press| ON| Fast blue flashing
| (Any)| 2 seconds ong press
long| OFF| N/A
Master Bluetooth Pairing| Fast blue flashing| Double Press| Master —looking
for
Follower Pairing| Slow blue flashing
Master — looking for Follower
Pairing| Slow blue flashing| Double Press| Master — Bluetooth
Pairing| Fast blue flashing
Master Bluetooth Pairing| Fast blue flashing| Single Press| Follower| No LED
Follower| No LED| Single Press| Master — Bluetooth
Pairing| Fast blue flashing
OFF| N/A| Hold 10 seconds
(RESET)| Master— Bluetooth
Pairing| Fast blue flashing
In order to go back to the factory setting on your Nordic Light PRO, Turn off
the Nordic Light PRO by holding the ON/OFF button for 2 seconds (only if the
product is in ON Mode).
Wait 3 seconds. Now hold and press the ON/OFF button for 10 seconds until the
LED turns ON, OFF, and then ON again.
This needs to be done if you want the unit to “remove” any previously paired
phones or Master/Follower units.
15. Charging
Access the Nordic Light PRO keypad by using the key and inserting the USB C
jack into the USB C port. If you are using the product for the first time, it
is recommended to leave the USB C jack plugged-in for a minimum of 12 hours,
in order to charge the internal battery fully.
General Notes:
For an optimal experience, keep your mobile device within 3-5m of the Master
speaker unit. Position your units in the same room or outdoor area within
5-10m from the Master unit, free from obstructions.
The performance of your Nordic Light PRO products may vary based on device,
distance, and other environmental factors.
Installing the Oil cartridge.
Step 1 : Remove the glass shade from the speaker unit, and set it aside.
Step 2: Remove the cartridge cover by turning it anti-clockwise.
Step 3: Remove the safety cap on your Kooduu refill cartridge to expose
the wick.
Step 4: Place the Kooduu refill cartridge, making sure the cartridge is
centered.
Step 5 : Place the cartridge cover over the cartridge and turn it
clockwise until tight. You may now light the Wick and place the glass back on
top of the speaker unit. Make sure the edges of the glass shade is inside the
silicone guard. Enjoy the ambient shine of your Nordic Light PRO.
Maintenance and cleaning
Servicing or repair must only be carried out by a specialist or specialist
workshop. The product contains no parts that require servicing by you.
Therefore, never open the product (except for the procedures described in
these operating instructions). A dry, soft and clean cloth is sufficient for
cleaning the outside.
Never use any aggressive cleaning agents, alcohol, or other chemical solutions
that would damage the casing (discoloration).
Disposal
a) Product
Electronic devices are recyclable waste and must not be disposed of in the
household waste! At the end of its service life, dispose of the product
according to the relevant statutory regulations. Remove any inserted
batteries/rechargeable batteries and dispose of them separately from the
product.
b) Batteries and Rechargeable
Batteries You as the end-user are required by law (Battery Ordinance) to
return all used batteries/rechargeable bat-stories. Disposing of them in
household waste is prohibited! Batteries/rechargeable batteries that contain
any hazardous substances are labeled with the adjacent icon to indicate that
disposal in domestic waste is forbidden. The descriptions for the respective
heavy metals are Cd=cadmium, Hg=mercury, and Pb=lead (the names are indicated
on the battery/rechargeable battery e.g. below the rubbish bin symbol shown on
the left).
You may return used batteries/rechargeable batteries free of charge at the
official collection points in your community, in our stores, or wherever
batteries/rechargeable batteries are sold. You thus fulfill your statutory
obligations and contribute to the protection of the environment.