TYPES 24” Plug & Glow HyperBright Lighting Strips Instruction Manual
- June 5, 2024
- TypeS
Table of Contents
24” Plug & Glow™ HyperBright™
Lighting Strips
Smart LED Starter Kit
Instruction Manual
PACKAGE CONTENTS
TECHNICAL SPECIFICATION
Working voltage: DC 12V Only
Bluetooth distance: No obstacle 33ft
Frequency band: 2.4GHz
Types of LED: 5050 SMD RGB
Maximum LED: 20ft (total combined)
Maximum amperage draw: 3A
INSTALLATION
-
Choose your desired location. ( – see suggestions above)
-
Clean surface thoroughly with isopropyl alcohol. Dry completely.
-
Peel off the 3M™ tape backer and carefully apply to the desired area.
Note: -
For use with 12V power only
-
The suitable temperature for installation is 70°F (21°C) or above.
-
If needed LED strips can be cut – ONLY cut where scissors mark is shown.
Note the portion of the strip that is cut off is no longer usable.
POWER
Two Power options are available
A. 12V Plug-in power adapter
B. 12V Hardwire
- Select your desired power connection and connect to the Plug & GlowTM Smart Lighting Hub Controller
- Connect the LED strip with an extension cable to the Smart Lighting Hub Controller. Use arrow indication to match the correct direction.
APP INSTALLATION
|
---|---
https://itunes.apple.com/us/app/type-s/id958525286?mt=8|
https://play.google.com/store/apps/details?id=com.types
Compatible with iPhone 4s & higher, iPad3, iPad Mini, iPad Air & higher, and
iPod touch 5th Generation & higher. Requires iOS 7.0 or higher.| Compatible
with phones with Android™ 4.3 or higher. Note: not all Android™ phones are
equipped with Bluetooth® v4.0 required for this application.
---|---
- Install the Smart Lighting APP on your Smart phone. Scan the above QR code to find the compatible APP for iOS or Android.
- Or you can search for the APP through the APP Store or Google Play by:
TYPE S LED
- Once installed, open the APP and begin enjoying your Plug & Glow™ experience.
USING THE APP
APP will automatically pair to the Hub when both are powered on (including Bluetooth) and within 33ft. Granting the permission of smartphones on Bluetooth access is needed. Please make sure you have your Bluetooth turned On.
USING THE APP Cont.
A. Master On/Off Switch
B. LED Zone Functions:
Connect and control up to four separate zones.
On/Off: Press each zone icon to turn the LED On or Off.
Move Zone Icon:
Press and hold the zone icon, and select “Move” to position each zone icon at
your desired location.
Rename Zone Icon:
Press and hold the zone icon, and select “Rename” to rename each icon. (Note:
Maximum 4 characters).
Select Multiple:
You can select multiple zones and control the same setting at once. Press and
hold the zone icon, select “Select Multiple” then select your desired zone by
pressing “Confirm”. To ungroup your selection after multiple zones are
selected, you can deselect the icon from “Select Multiple” or press and hold
the zone icon and select “Ungroup” if you have all 4 zones selected.
Select Vehicle Schematic:
Press>, select your desired vehicle schematic.
C Save Preset:
You can save your favorite settings. After creating your setting, press “Save
Preset” and enter your preset name. You can save up to 10 preset settings.
Select Preset:
You can select your previously saved preset setting, press “Select Preset” and
choose your saved setting.
Delete Saved Preset Setting:
To delete a saved preset setting, press “Select Preset” and press and hold the
preset setting that you wish to delete. Press “Yes” to delete.
NOTE: You can not delete your current selected setting, make sure you are
not selected to the setting that you wish to delete.
Select Color:
Choose from up to 49 different colors. Press “Select Color”, select your
desired color, and press “Confirm”.
D Brightness:
Slide bar to adjust the brightness setting
E LED Mode:
Choose from 8 different modes
Note: Music Mode is sound activated.
F Speed:
Slide bar to adjust the speed of the movement from each LED Mode. Permission
of notification push granting is required on smartphones.
EXTENDABLE
Type S Plug & GlowTM kits can be extended up to a maximum of 20ft (6m) using compatible extension strips. To function properly extension strips must be connected to the same type of strip. (see examples below)
WARNING
WARNINGS:
- Do not install or use the product if it, in any way, impairs the safe operation of your vehicle.
- NEVER use the APP while operating your vehicle. Use the APP when the vehicle is stationary only.
- Follow the manufacturer’s instructions to ensure the product is properly & safely installed.
- Check your state or provincial laws before installing. The vehicle owners must comply with all applicable laws.
- This product is intended solely for decorative purposes. Manufacturer and Seller assume no liability for installation or use, which are solely the responsibility of the purchaser.
- This product is not DOT approved and is designed and intended for interior use only. Not for use in extreme temperatures such as underhood applications.
- The Manufacturer and Seller are not responsible or liable for consequential, incidental, or indirect damages, whether to person or property, resulting from the installation or improper use of this product.
WARNING: This product can expose you to chemicals including DEHP and
DINP, which is known to the State of California to cause cancer and birth
defects or other reproductive harm.
For more information go to
www.P65Warnings.ca.gov.
Have a comment or question?
Email us at: info@typesauto.com or visit us
online at: www.typesauto.com
Winplus North America, Inc.
2975 Red Hill Ave., Ste. 100, Costa Mesa, CA 92626, USA
Tel: 1.866.294.9244
© 2018 Winplus North America, Inc.
All rights reserved.
3M™ is a trademark of 3M Company.
The Bluetooth® word mark and logos are registered trademarks owned by the
Bluetooth SIG, Inc., and any use of such marks by Winplus Co. Ltd is under
license. Other trademarks and trade names are those of their respective
owners. iPhone, iPad, and iPod touch are trademarks of Apple Inc. Android is
a trademark of Google Inc.
FCC / IC Compliance Statement:
This device complies with Part 15 of the FCC rules and Industry Canada
license-exempt RSS standard(s). Operation is subject to the following two
conditions: (1) This device may not cause harmful interference, and (2) this
device must accept any interference received, including interference that may
cause undesired operation.
Warning: Changes or modifications to this unit not expressly approved by
the party responsible for compliance could void the user’s authority to
operate the equipment. The manufacturer is not responsible for any radio or TV
interference caused by unauthorized modifications or changes to this
equipment. Such modifications or changes could void
the user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits
for Class B digital devices, pursuant to part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses,
and can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or more
of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and the receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
The device has been evaluated to meet general RF exposure requirements.
To maintain compliance with FCC/IC’s RF exposure guidelines, this equipment
should be installed and operated with a minimum distance of 20cm between the
radiator and your body.
OPTIONAL ACCESSORIES
PLUG & GLOW™ ACCESSORIES AVAILABLE TO TAKE YOUR EXPERIENCE TO THE NEXT LEVEL
USE ONLY MULTI-COLOR
MICRO LIGHT & STRIP EXTENSIONS
24” Plug & Glow™ Lighting Strips Smart LED Starter Kit
LM55252
Responsible Party:
Winplus North America Inc.
2975 Red Hill Ave., Ste. 100, Costa Mesa, CA 92626, USA
Tel: 866-294-9244
Visit us online at: www.typesauto.com
ML-55252M_V1
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>