ahlsell 2700023 Charge Box EV Car Charger Instruction Manual

Table of Contents

Charging station with fixed cable

Contents of the box

Charging station

ahlsell-2700023-Charge-Box-EV-Car-Charger-fig-3

EV Car Charger 3.7kW

EV Car Charger 11kW

Safety and protection features:

EV Car Charger 22kW

Installation type: Wall / Post
Connection type: Mode C (fixed cable)
Certificate: TÜV, CE
Encapsulation class: IP66
Rated voltage: 400VAC
Rated current: 32A
Earth leakage circuit breaker (ELCB): Type A 30mA + 6mA DC Maximum output: 22 kW
Operating temperature: -40 to +80c
Enclosure material: ABS + PC
Communication: None
RFID: No
Adjustable charging current: Yes, via APP
Mobile application: Yes
Safety and protection features:
Warning function on the screen
Charging station
Overcurrent protection (output)
Undervoltage protection (input)
Surge protector (input)
Temperature protection
Earth leakage circuit breaker (ELCB)

ahlsell-2700023-Charge-Box-EV-Car-Charger-fig-4

3-phase charging station – 3-phase 400V supply
All conductors from the charging station are connected to the supply side conductors.

Charging station with fixed cable

3-phase charging stations

Error on screen

Failure to comply with the instructions may cause danger
Only use the charging equipment according to normal operation and use of the equipment
Children must not be able to use the charging equipment
Install the charging station at a safe distance from pyrotechnics and dusty and/or corrosive bags or gases
The charging stations run at very high power and can be fatal if used improperly
Should an emergency occur, cut the power to the charging station into the fuse box
Never disassemble the charging station during operation

Maintenance

To ensure the normal service life of the charging station and reduce risk, the charging station should be regularly inspected for external damage. Maintenance/repair of the equipment may only be carried out by certified personnel.
The charging station should be kept inside its original assembly within a temperature range of -40 to +80 Celsius and with humidity not exceeding 95%. The storage environment must not contain acid, alkaline, corrosive or explosive gases, and must be protected from rain, snow, wind and sand.

Failure to comply with the instructions may cause danger!

Check the equipment regularly for visible damage and if there may be a risk of electric shock
Regularly test that all security features work
In the event of an earth fault, the charging station must be inspected
Persons installing the charging station must ensure that the safety of equipment and personnel is ensured during installation and use
Ensure that the charging station is sufficiently earthed before use
All tools used during installation that do not require live material should be insulated to avoid the risk of accidental short circuits or personal injury
Never make any change to the equipment other than what is described in the instructions
Keep the charging station clean and ensure as stable an operating environment as possible in terms of temperature and humidity.
Ensure that the infrastructure where the charging station is installed is properly dimensioned and secured before use