Udreamer UD001 Vinyl Record Player Wireless Turntable User Manual
- June 5, 2024
- Udreamer
Table of Contents
UD001 Vinyl Record Player Wireless Turntable
User Manual
D ear customer,
Thanks for your support for the Udreamer record player
Any questions or problems, pls send us your Order ID, Video of Your Problem to
our Tech
Support: [email protected] for a 100%
satisfactory solution
QA
Q: The Cover is Cracked, What Should I Do?
A: Pls contact tech support directly at:[email protected]
Q: What Can I Get in the Package?
A: In the package, you can get a turntable, a user manual, a power cord in
5V,1.5A,a remote control (No battery included). If you find something missing,
pls contact our tech support
Note: This Turntable Only Suits Power Cord in 5V,1.5A Output, Power Cord in
Any Other Output Could Burn the Turntable
Q: The Record Player Can Not Play Vinyl Properly, Skips the Records, What
Should I Do?
A: Usually, there are 4 reasons to make this happen:
-
The position of the stylus is tilt, not in the middle, the non-paralleled tonearm will be in incorrect tracking and cause the skip. See the below picture.
Solution: pls contact tech support to get a new needle -
Vinyl records have been used for a long time, some scratches on the surface may cause the skip
Solution: Pls change a new vinyl -
The stylus has been damaged due to daily use.
Solution: Pls change a new stylus or contact us -
Resistant mud is too much or cooled by cold weather, causing the stylus pressure to be light, and the stylus keeps repeating in a place.
Solution: Please contact the tech support, the tech support will send you videos to show how to fix it
Q: The Turntable Lights but Not Spins?
A: This is mostly caused by losing the belt.Contact tech support to get the
video to re-install the belt
Q: The Speed is Not Correct, Too Slow, Too Fast, or Inconsistent/Tonearm
Lifter is Stuck
A: Contact tech support to get the video to see how to fix these problems
Q: Turntable platter is wobbling
A: There is a built-in spring inside of the turntable to reduce shock in order
to protect the sound from distortion, so it’s normal to slightly up and down.
If the turntable platter is badly uneven,it may be caused by internal losing
screws, if this is the case, contact our tech support to get a video to see
how to fix it.
Q: The Turntable won’t Stop and Keeps Playing at the End of the Music,
What’s Wrong?
A: Usually the turntable will stop at the end of music playing. But sometimes
it won’t stop because of the record problem, in this way, pls check the auto-
stop button, turn on it, it will stop, see the below picture
Q: After Plug the
Power, the Turntable is of No Light
-
The power cord may be damaged
Solution: Pls change a power cord to try, power cord with 5V,1.5A output is suitable for this a turntable or you can just contact us to get it -
The circuit is damaged
Solution: Pls contact us to change it or get the refund
Q: Does it come with a 45rpm adaptor?
A: Yes