BUGATTI Armour Protection Film Screen Protector Instruction Manual
- June 5, 2024
- BUGATTI
Table of Contents
Armour Protection Film Screen Protector
Instructions manual bugatti armour protection film
DISPLAY
Step 1
Align the smartphone on a table with a non-slip surface.
Step 2
Wipe the display clean with the disinfectant cloth.
Step 3
Clean the display with the microfibre cloth without leaving streaks.
Step 4
The result after using the disinfectant and microfibre cloth should be a clean
and streak-free display.
Step 5
Remove any remaining dust particles from the display with the enclosed
adhesive tape.
Step 6
Now carefully align the armour film with the display.
Step 7
In the lower third, attach the armour film to the display with your finger for
a temporary hold.
Step 8
Bend the upper side of the film backwards and slowly counteract the bend with
the slider and pull it off to the end of the display in one go. At the same
time, the protective film comes off towards the front.
Step 9
Repeat the process as in step 8 now on the opposite side, slowly lift the film
and pull it to the centre. Using the pusher, wipe again in the opposite
direction to the edge, in one go.
Step 10
Use the slider to strip the sides of the film so that no bubbles form.
Step 11
Slowly pull the adhesive strip backwards so that the film protector detaches
from the main film.
Step 12
Your bugatti armour film is ready! Your bugatti team wishes you a lot of fun
with your new bugatti armour protection film! www.100.sale
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>