Electrolux EHE5224B-A 491L UltimateTaste 700 French Door Refrigerator User Manual

EHE5224B-A 491L UltimateTaste 700 French Door Refrigerator

User Manual
EN – English

Refrigeration

0000000000

CONGRATULATIONS
Dear customer, Congratulations and thank you for choosing our refrigerator. We are sure you will find your new refrigerator a pleasure to use. Before you use the refrigerator we recommend that you read through the relevant sections of this manual, which provides a description of your refrigerator and its functions. To avoid the risks that are always present when you use an electric appliance, it is important that the refrigerator is installed correctly and that you read the safety instructions carefully to avoid misuse and hazards. We recommend that you keep this instruction booklet for future reference and pass it on to any future owners. After unpacking the refrigerator, please check it is not damaged. If in doubt, do not use the refrigerator but contact your local customer care centre.
The symbols you will see in this booklet have these meanings:
WARNING This symbol indicates information concerning your personal safety.
CAUTION This symbol indicates information on how to avoid damaging the refrigerator
IMPORTANT This symbol indicates tips and information about use of the refrigerator
ENVIRONMENT This symbol indicates tips and information about economical and ecological use of the refrigerator
Conditions of use
This refrigerator is designed and intended to be used in normal domestic applications only.
Record model and serial number here:
Model number: …………………………………………………………………….
Serial number: ……………………………………………………………………….

CONTENTS
Important safety instructions …………………………………………………… 3
Refrigerator Features Top mount refrigerator features ……………………………………. 4 Bottom mount refrigerator features ………………………………. 6 French door ice & water refrigerator features ……………. 7
Installing your new refrigerator Unpacking your refrigerator …………………………………………… 8 Locating your refrigerator ……………………………………………….. 8 Installing your refrigerator ……………………………………………….. 8 Fitting the handles …………………………………………………………….. 9
Using your refrigerator Removing features …………………………………………………………. 10 Crisper drawer …………………………………………………………………. 10 NutriPlusTM (Anti-Oxidant Filter) ………………………………… 10 Glass shelves ……………………………………………………………………. 10 Freezer shelves ……………………………………………………………….. 10 Drawers with telescopic slides ……………………………………… 10 Twist & Serve ice ……………………………………………………………… 11 LED Lighting ………………………………………………………………………. 11 Temperature control ………………………………………………………. 12
About the User Interface ETB4600 & ETB5400 model …………………………………………… 13 EBE4500 model ………………………………………………………………… 14 ETE5720 & EHE5224model …………………………………………… 15
General information Error codes ……………………………………………………………………… 17 Cleaning the refrigerator food ……………………………………. 18 Storage guide…………………………………………………………………… 19 Troubleshooting ………………………………………………………………. 20 Ice maker troubleshooting ……………………………………………. 23

2 CONTENTS

IMPORTANT SAFETY INSTRUCTIONS
Note: You must read these warnings carefully before installing or using the refrigerator. If you need assistance, contact your customer care centre. The manufacturer will not accept liability, should these instructions or any other safety instructions incorporated in this book be ignored.
WARNING
· This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety. Children should be supervised to ensure that they do not play with the appliance.
· It is essential the power point is properly earthed to ground. Consult a qualified electrician if you are unsure.
· Do not use electrical appliances inside the food storage compartments of the appliance, unless they are of the type recommended by the manufacturer.
· Unplug the refrigerator before cleaning or moving it to avoid electric shock.
· Never unplug the refrigerator by pulling the electrical cord as this may damage it. Grip the plug firmly and pull straight out.
· If the power cord is damaged, it must be replaced by the manufacturer, its service agent or similarly qualified persons in order to avoid a hazard.
· Don’t use a steam cleaner. If live components come into contact with condensing steam, they may short-circuit or cause an electric shock.
· Do not store explosive substances such as aerosol cans with a flammable propellant in this appliance. If pressurised aerosol containers bear the word `flammable’ and/ or a small flame symbol, do not store them inside any refrigerator or freezer. If you do so you may cause an explosion.
· Do not damage the refrigerant circuit.
· This appliance contains insulation formed with flammable blowing gases. Avoid safety hazards by carefully disposing of this appliance.
· If you wish to discard this refrigerator, please contact your local authorities and ask for the correct method of disposal.
· When you dispose of your old refrigerators and freezers, remove any doors. Children can suffocate if they get trapped inside.
· The plug must be accessible when the appliance is in position.
· Never try to repair the refrigerator yourself, only use a qualified or authorized service person for repairs.

WARNING
R600a REFRIGERANT WARNING
This appliance contains flammable R600a refrigerant. Avoid safety hazards by carefully installing, handling, servicing and disposing of this appliance.
· Ensure that the tubing of the refrigerant circuit is not damaged during transportation and installation.
· Leaking refrigerant may cause eye injuries or ignite.
· The room for installing appliance must be at least 1m3 per 8g of refrigerant. The amount of refrigerant in the appliance can be found on the rating plate inside the appliance.
· If you are unsure of the refrigerant check the rating plate inside the refrigerator compartment.
· It is hazardous for anyone other than an Authorised Service Person to service this appliance. In Queensland Australia the Authorisation Service Person MUST hold a Gas Work Authorisation for hydrocarbon refrigerants to carry out servicing or repairs which involve the removal of covers.
· Keep ventilation openings in the appliance enclosure or in the built-in structure, clear of obstruction.
· Do not use mechanical devices or other means to accelerate the defrosting process, other than those recommended by the manufacturer.

SAFETY 3

TOP MOUNT REFRIGERATOR FEATURES ETB4600 & ETB5400

Freezer temperature control
Refer to the section “Temperature Control” for details on using this feature.
Twist & Serve Ice Refer to the section “Using
your Refrigerator” for details on removing, relocating and using this
feature.
Chiller drawer Use the chiller drawer to
store foods like small goods, fresh or cooked meat and cheese, or as an
additional crisper. The drawer will prevent strong
food odours from impacting the rest of the refrigerator. To remove the
chiller drawer, pull it forward, then lift it up and
pull it further forward.
TasteGuard Deodoriser
NutriPlusTM Anti-Oxidant Filter
Crisper Use the crisper to store vegetables, fruit or small
goods.

ETB5400 illustrated

FlexStor® bins
Slide the bins to meet different storage needs. To remove, lift and tilt. To replace, tilt the top and push down until locked in place.
Egg tray
Removable egg tray provided for your convenience.
Door storage bin
The door bin can be removed by lifting it up over the support lugs. To replace, push down over the support lugs to lock in place.
Bottle storage bin Use the bottle bin for tall bottle storage. The bottle bin can be removed by lifting it up over the support lugs. To replace, push down over the support lugs to lock in place.

Refrigerator control panel
From this panel you can control the temperature of the refrigerator compartment as well as setting the quick chill function or resetting the door alarm.
For further information on how to use this feature refer to the section “About the User Interface”.

Freezer control
This is a simple slide control to adjust the temperature of your freezer compartment.
For further information on how to use this feature refer to the section “Temperature Control”.

Features may vary depending on model. Not all models will have features listed.

4 FEATURES

TOP MOUNT REFRIGERATOR FEATURES ETE5720

Automatic Ice Maker Refer to the section “Using your Refrigerator” for details
on using this feature.
Chiller drawer Use the chiller drawer to
store foods like small goods, fresh or cooked meat and cheese, or as an
additional crisper. The drawer will prevent strong
food odours from impacting the rest of the refrigerator. To remove the
chiller drawer, pull it forward, then lift it up and
pull it further forward. Water Tank
TasteGuard Deodoriser
NutriPlusTM Anti-Oxidant Filter
Crisper Use the crisper to store vegetables, fruit or small
goods.

ETE5720 illustrated

FlexStor® bins Slide the bins to meet different storage needs. To remove, lift and tilt. To replace, tilt the top and push down until locked in place.
Egg tray
Removable egg tray provided for your convenience.
Door storage bin The door bin can be removed by lifting it up over the support lugs. To replace, push down over the support lugs to lock in place.
Bottle storage bin Use the bottle bin for tall bottle storage. The bottle bin can be removed by lifting it up over the support lugs. To replace, push down over the support lugs to lock in place.

Refrigerator/freezer control panel
From this panel you can control the temperature of the refrigerator and freezer compartments as well as setting the Boost function, controlling the Ice Maker or resetting the door alarm.
For further information on how to use this feature refer to the section “About the User Interface”.

Features may vary depending on model. Not all models will have features listed.

FEATURES 5

BOTTOM MOUNT REFRIGERATOR FEATURES EBE4500

TasteGuard Deodoriser
NutriPlusTM Anti-Oxidant Filter
Crisper Use the crisper to store vegetables, fruit or small
goods.
Twist & Serve Ice Refer to the section
“Using your Refrigerator” for details on removing, relocating
and using this feature
Freezer storage bin Refer to the section “Using your Refrigerator” for details on removing, and using this feature.
Refrigerator/freezer control panel From this panel you can control the temperature of the refrigerator and freezer compartments as well as setting the quick freeze function or resetting the door alarm. For further information on how to use this feature refer to the section “About the User Interface”.

FlexStor® bins Slide the bins to meet different storage needs. To remove, lift and tilt. To replace, tilt the top and push down until locked in place.
Egg tray Removable egg tray provided for your convenience.
Door storage bin The door bin can be removed by lifting it up over the support lugs. To replace, push down over the support lugs to lock in place. Bottle storage bin Use the bottle bin for tall bottle storage. The bottle bin can be removed by lifting it up over the support lugs. To replace, push down over the support lugs to lock in place.
EBE4500 illustrated

Features may vary depending on model. Not all models will have features listed.

6 FEATURES

FRENCH DOOR ICE & WATER REFRIGERATOR FEATURES EHE5224

TasteGuard Deodoriser
Deli drawer Use the chiller drawer to store foods like small goods, fresh or cooked meat and cheese, or as an additional crisper. The drawer will prevent strong food odours from impacting the rest of the refrigerator. To remove the chiller drawer, pull it forward, then lift it up and
pull it further forward.
Water Tank
NutriPlusTM Anti-Oxidant Filter
Crisper Use the crisper to store vegetables, fruit or small
goods.
Automatic Ice Maker Refer to the section “Using your Refrigerator” for details
on using this feature.
Freezer storage bin Refer to the section “Using your Refrigerator” for details
on using this feature.

EHE5224 illustrated

Refrigerator/freezer control panel
From this panel you can control the temperature of the refrigerator and freezer compartments as well as setting the Boost function, controlling the Ice Maker or resetting the door alarm.
For further information on how to use this feature refer to the section “About the User Interface”.

Egg tray
Removable egg tray provided for your convenience.
FlexStor® bins
The door bin can be removed by lifting it up over the support lugs. To replace, push down over the support lugs to lock in place.
Bottle storage bin
Use the bottle bin for tall bottle storage. The bottle bin can be removed by lifting it up over the support lugs. To replace, push down over the support lugs to lock in place.

Features may vary depending on model. Not all models will have features listed.

FEATURES 7

INSTALLING YOUR NEW REFRIGERATOR
Unpacking
ENVIRONMENT
Most of the packing materials are recyclable. Please dispose of those materials through your local recycling depot or by placing them in appropriate collection containers.
Important ­ check for any damages or marks. If you find the refrigerator is damaged or marked, you must report it within 7 days should you wish to claim for damage/ marks under the manufacturers warranty. This does not affect your statutory rights.
Clean your refrigerator thoroughly following the instructions in the “Cleaning” section and wipe off any dust that has accumulated during shipping.
Locating the refrigerator

CAUTION
Automatic aerosol systems (such as insect control) should not be located adjacent to the product as the spray may cause long term damage to the external plastics of the appliance.
Do not put the refrigerator in a location that is too cold or is unprotected, for example in a garage or on a veranda. The ambient temperature should be above 10°C.
Put the refrigerator in a dry place avoiding areas of high moisture or humidity.
Ensure the refrigerator is located on an even surface.

Adequate ventilation around your refrigerator
The diagram below shows the recommended airspace to allow for ventilation of your refrigerator.

30mm

350mm 30mm

50mm
Recommended air space CABINET DOOR

X

Y

If you have a cupboard above the refrigerator with a rear gap of less than 100 mm (Y), recommended clearance at the top of the refrigerator increases from 50mm to 90mm (X) minimum.
When positioned in a corner area, spacing of at least 350mm (300mm for multi- door models) on the hinge side will allow the doors to open enough to enable the removal of bins and shelves.
NOTE: Doors are designed to sit proud of cabinetry (not flush). The clearances shown above are the recommended minimum clearances.
The clearance at the rear must not exceed 75mm.

Installing your refrigerator
1. Roll the refrigerator into place. The rollers are designed for forward or backward movement only. They are not castors. Moving the refrigerator sideways may damage your floor and the rollers. Before moving your refrigerator ensure height adjusting nut and the stability foot are fully wound up off the floor.
2. Wind the large height adjusting nut under door hinge down until the refrigerator is tilted back by 10mm (see diagram).
10 -15mm

Height adjusting nut

Fixed rear rollers

3. Wind the large height adjusting nut on the handle side down until the refrigerator is level and stable. If you have difficulty winding the nut or height adjusting foot down, have someone tilt the refrigerator back so you have better access.

stability foot wound up
4. Check the alignment of the refrigerator to the surrounding cupboards to see if it is level. You can adjust the level as detailed in step 2 and 3.

aligned to cupboards ie. even gap

top of refrigerator is level ie. horizontal

adjust front feet for uneveness of floor eg. wind this foot down or up

8 INSTALLATION

INSTALLING YOUR NEW REFRIGERATOR
5. If you find your refrigerator rocks from corner to corner, it means your floor is uneven. Find a piece of plastic or hardboard etc. and pack it firmly under the roller.
6. You may now need to fine-tune the installation by repeating steps 3, 4 and 5.
7. When you have the appliance in its final position, it needs to be stabilised. Wind the stability foot under the door hinge down to the floor until it just makes contact with the floor. Lift the front of the appliance to take the weZight off the stability foot, then turn it half a turn further to ensure firm contact with the floor. Wind the large height adjusting nut back up to ensure all the weight is now on the front stability foot.
8. Repeat step 7 for the stability foot on the handle side. Whenever you need to move the appliance, be sure to wind the feet back up so that the appliance can roll freely and be sure to reset it when reinstalling.

Large height adjusting nut wound up.

stability foot wound down

9. Plug your refrigerator straight into its own power point and never use a double adapter. If you need to roll the refrigerator to get to the plug, remember to raise the stability foot first.
10. Before you put any food in your refrigerator, it’s recommended you leave it on for 2 or 3 hours to check it is running properly.

Fitting the handles

The handles are supplied prepackaged inside your refrigerator and will require fitting.
Refer to the instructions provided in the pack.
Congratulations! You have successfully installed your new refrigerator.

USING YOUR REFRIGERATOR
Refrigerators work by transferring heat from the food inside to the outside air. This operation makes the back and sides of the refrigerator feel warm or even hot particularly at start-up and on warm days ­ this is normal. Avoid placing food against the air vents in the refrigerator as it affects efficient circulation. If the door is opened frequently, a light frosting will occasionally occur on the freezer’s interior. This is normal and will clear after a few days. If the freezer door is accidentally kept open, a heavy frost will coat the inside walls and should be removed. Your new refrigerator uses a high-speed compressor, along with other energy-efficient components, which may make unusual sounds and be more noticeable at night and quieter times. These sounds simply indicate your refrigerator is working how it should. They include:
· Compressor running noises; · Air movement noise from the small fan motor; · A gurgling sound, similar to water boiling; · A popping noise, heard during automatic defrosting;
and · A clicking noise, prior to compressor start-up. Further
details can be found in the Troubleshooting Guide.
IMPORTANT For top mount refrigerators (where the freezer is on top of the fresh food compartment).
· Don’t place food forward of the ribs on the freezer floor, as it will keep the door open.
Ribs
For bottom mount refrigerators (where freezer is below the fresh food compartment):
· Ensure all freezer drawers and shelves are pushed back completely to prevent them from keeping the door open.

USING YOUR REFRIGERATOR 9

REMOVING FEATURES
Removal of Crisper Drawer: 1. Empty food from the crisper. On some models it will be
necessary to remove the bottle storage bins. 2. Remove the crisper by pulling forward, then up and
forward again. 3. For top mount models, remove the crisper shelf by lifting
the catches on the left and right underside of the shelf and pulling the shelf forward.
CATCH
NutriPlusTM (Anti-Oxidant Filter) Installing Filter Cartridge Your filter can be found in the crisper. To enjoy the full benefit of NutriPlusTM, it is important to install it after turning on the refrigerator. For installation, please follow the following instruction. 1. Remove plastic wrap 2. Hook the filter to the back of the crisper bin.
Replacing Filter Cartridge The filter is located at the back of the crisper. Hold the filter, move upwards to release from the hooks.

Glass shelves
To remove the shelves, gently pull them forward until the shelf comes clear of the shelf guides. To return the shelf, make sure there is nothing behind that may obstruct movement. Gently push the shelf, into the cabinet and back into position.
Freezer shelf
Remove the freezer shelf by lifting the catches on the right and left underside of the shelf to release the shelf then pull the shelf toward you.
Drawers fitted with telescopic slides
To remove the drawer for cleaning. 1. Empty food from the drawer.
2. Remove the drawer by pulling it forward and lifting the front to unhook it from the slides. Once you have removed the drawer, ensure the slides are pushed back so they are fully closed.
WARNING
Never close the door while the telescopic slides are extended. This may damage the slide and/or refrigerator or cause the slide to become disengaged from the refrigerator.
To replace the drawer: 1. Ensure the telescopic slides are pushed in all the way.
2. Slide the drawer into place over the slides and push the bin in until it stops.
3. Drop drawer into position.
Freezer bottom bin
To remove the bin, pull the drawer out until it is open all the way then lift bin out from the front of the bin. When refitting insert the rear of the bin first then lower into position.
When replacing the bins after cleaning, we recommend fitting the lower bin first.

10 REMOVING FEATURES

CAUTION
Never close the door while the telescopic slides are extended. It may damage the slide and/or the refrigerator or cause the slide to become disengaged from the refrigerator.
Twist and Serve Ice
Mounting the twist & serve dispenser to the other side of the freezer.
Note : This is only possible on top mount models.
1. Remove the ice bin and ice cube tray. If the ice tray assembly is frozen to the carriage, simply squeeze the tray and shelf together to break the ice.
2. Before you remove the ice carriage, remember to disengage it from the glass shelf as it may result in damage to the assembly.
3. Remove the centre runner by disengaging it at the front of the shelf, and removing it from the rear.

Insert into the slot at the rear of the shelf

Then engage into the front of the shelf

4. Refit the runner into the rear of the shelf on the right hand side and then engage the front.
5. Fit the carriage by sliding it into the runners until the front if the carriage engages with the shelf.
6. Refit the ice tray and ice bin.

WARNING Fill the ice tube tray with potable water only.
CAUTION LED lighting
Your appliance is fitted with long life LED lighting. In the unlikely event the LED lights should fail, then the LED lights should be serviced by the manufacturer.
Refer to the warranty page for contact details.

Automatic Ice Maker The automatic ice making function pumps water from the water tank located in the refrigerator and dispenses it into the automatic ice maker in the freezer.
The ice will then be dropped into the ice bin located beneath the ice maker
If the water tank is empty, the ice maker will automatically turn off after 3 attempts at pumping water from the tank. The ice maker indicator on the user interface shows the operational status of the ice maker (Refer control instructions).
Water Tank Refilling
Step 1. Pull the tank directly out of the tank housing frame.
Step 2. Pour potable water through the lid at the top of the water tank.
Step 3. Push the tank directly into the tank housing frame. To avoid water leaks ensure that the tank nozzle fully engages with the housing socket. Step 4. Ensure ice maker is switched ON (refer control instructions).
CAUTION
Do not fill the water tank with anything other than clean water (Filtered or Mineral water).
Soft drink, juice, tea or hot water etc, can damage your automatic icemaker. The water tank can withstand a maximum water temperature of 60°C.
Tips and Useful Information
Remove and clean ice bin and water tank once a month, discarding unused ice and water. This will ensure fresh ice and smooth operatio n of your icemaker.
Make sure your refrigerator is level to avoid uneven ice cubes.

REMOVING FEATURES 11

TEMPERATURE CONTROL
If you want to change the temperature, follow the instructions in the section About the User Interface for your model. Ensure that you make only small adjustments and wait 24 hours to see if it’s to your liking.
IMPORTANT
When you set a temperature, you set an average temperature for the whole refrigerator cabinet.
Checking the softness of ice cream is a good indication that your freezer is the right temperature, while checking the temperature of water kept in the refrigerator is a good way of checking the temperature of the food compartment.
Temperatures inside each compartment may vary, depending on how much food you store and where you place it.
High or low room temperature may also affect the actual temperature inside the refrigerator.
Top mount freezer temperature adjustment 1. Select the freezer control. 2. Slide the control to the right (as per image below). 3. Slide the control to the left (as per image below).
FREEZER TEMPERATURE SETTING RECOMMEDATION

Summer (>35°c)

Set to less cold

Normal Winter (<15°c)

Set to colder

12 TEMPERATURE CONTROL

ABOUT THE USER INTERFACE Control ­ ETB4600 & ETB5400

Refrigerator temperature
scale icons

Quick chill on/off icon
Temperature adjust/quick chill on/off button

DESCRIPTION Refrigerator temperature scale icons
Quick Chill On/ Off icon Temperature adjust/ quick chill on/ off button

· Indicates the temperature setting of the refrigerator compartment.
· Indicates the status of the Quick Chill function. Temperature Control
· Touch the Temp’ button to awaken control. · Touch theTemp’ button to decrease the refrigerator temperature. There are 8 temperature settings indicated by the illumination sequence on the display. Once the coldest temperature is reached the display will return to the warmest setting with the next press.
Quick Chill · Use the quick chill function when you add a large amount of food to the refrigerator compartment.
· Press and hold the Temp’ button for 3 seconds. The Quick Chill icon will flash indicating that the Quick Chill is active. · Your refrigerator will run at 2°C for 90 minutes, then automatically return to normal mode. · The Quick Chill function can be cancelled anytime by pressing theTemp’ button again.

IMPORTANT
The factory default settings for the refrigerator is “Mid”. If you want to change the temperature, remember to make only small adjustments and wait 24 hours to see if it’s correct.

USER INTERFACE 13

ABOUT THE USER INTERFACE Control ­ EBE4500
Quick freeze button
Freezer temperature scale icons
Temperature adjust Refrigerator indication icon Compartment select button

Quick freeze on/off icon
Refrigerator temperature scale icons
Freezer indication icon

DESCRIPTION Quick Freeze on/ off icon Quick Freeze button
Refrigerator / Freezer temperature scale icons Temperature adjust button
Refrigerator/Freezer indication icon Compartment select button

· Indicates the status of the Quick Freeze function.
Use the Quick Freeze function when you add a large amount of food to the freezer compartment.
· Press the Quick Freeze’ button. The Quick Freeze icon will flash indicating that the quick freeze is active and the compressor will run continuously for 90 minutes. · After 90 minutes the freezer will automatically return to normal mode. · The Quick Freeze function can be cancelled anytime by pressing the button again. · Indicates the temperature setting of the refrigerator compartment. · Indicates the temperature setting of the freezer compartment. · Touch any button to awaken control. · Touch theTemp’ button to decrease the selected compartment temperature. There
are 8 temperature settings indicated by the illumination sequence on the display. Once the coldest temperature is reached the display will return to the warmest setting with the next press.
· Indicates the selected zone.
· Press to select the desired compartment. · The refrigerator / freezer indication icon will show which zone is selected.

IMPORTANT
The factory default settings for the refrigerator is “3°C” and “-18°C” for the freezer. If you want to change the temperature, remember to make only small adjustments and wait 24 hours to see if it’s correct.
14 USER INTERFACE

ABOUT THE USER INTERFACE Control ­ ETE5720 & EHE5224

1

2

4

3 5

6

7

8

10

9

11

12 13

BUTTON / ICON
1

DESCRIPTION Compartment Selector button

PRIMARY FUNCTION Selects controllable compartment.

2

Lock Icon

Indicates if the user interface is locked.

3

Compartment Icon

Indicates controllable compartment.

4

ECO Icon

Indicates if the appliance is operating in its most energy efficient mode.

5

Digital display

Indicates temperature of selected compartment.

6

Decrease button

Decreases temperature of selected compartment as well as the drinks chill time

7

Increase button

Increases temperature of selected compartment as well as the drinks chill time.

8

Mode indicators (Boost, Fast Ice, Holiday) Indicates appliance operation mode.

9

Display Lock button

Selects lock state of user interface.

10

Mode select button

Selects operation mode of appliance.

11

Drinks Chill button

Selects drinks chill timer.

12

Icemaker status indicator

Shows operational status .

13

Icemaker on/off button

Selects operation of icemaker.

USER INTERFACE 15

FUNCTIONS OF THE USER INTERFACE Control ­ ETE5720 & EHE5224 models.

FUNCTION Setting the temperature

ICON

Boost mode Increases the chill rate of the refrigerator for 90mins before returning to pre-set mode.
Fast Ice Decreases the freezer temperature to -23°C for 26 hours before returning to pre-set mode.
Holiday mode The refrigerator minimises defrosting to save energy when doors remain closed for an extended period.
Display Lock Deactivates the user interface controls.
Drinks Chill Sets a timer for between 1 and 30 minutes as a reminder for when drinks are placed in the freezer for quick chill.

Ice on/off Enables/disables ice maker

INDICATOR
Eco Mode Enabled when appliance set to energy efficient operating temperatures.

ICON

OPERATION · Press button 1 until the desired compartment is displayed on icon 3. · Press buttons 6 or 7 to adjust temperature up or down. · Press button 10 until the boost icon is illuminated. · Boost mode can be deselected using button 10.
· Press button 10 until the fast ice icon is illuminated. · Fast Ice mode can be deselected using button 10.
· Press button 10 until the holiday icon is illuminated. · Holiday mode can be deselected using button 10 or opening
the fridge door. · When holiday made is disabled the temperature settings will
revert to the previous settings.
· To turn on/off press and hold button 9 for 3 seconds, the lock icon is illuminated when activated.
· To turn on press button 11 and initial time of 20 mins will appear on digital display. To adjust time use buttons 6 and 7.
· Alarm will sound when time is finished. · Press button 11 to turn off during or after countdown. The time
taken to chill depends on the size of your bottle. · Do not leave the bottle inside the freezer longer than the time
needed for chilling.
· To enable/disable press button 13 to cycle through on/off modes.
· Indicator 12 will illuminate when the ice maker is deactivated. · The ice maker will turn off automatically after sensing that the
water tank is empty.
OPERATION · ECO icon automatically appears when refrigerator is set between +3°C and +7°C and freezer is set between -14°C and -18°C

IMPORTANT
The factory default settings for the refrigerator is “3°” and “-18°C” for the freezer. If you want to change the temperature, remember to make only small adjustments and wait 24 hours to see if it’s correct.

16 USER INTERFACE

ERROR CODES & ALARMS

Alarms

ALARM ICON

WHAT IT MEANS
Freezer Temperature Alarm
Activates if the freezer temperature is 10°c over set temperature for a period of 50 minutes (except during a defrost).
An alarm will sound the temperature icons will flash.

OPERATION
· To deactivate the alarm for 50 minutes press any button.
· To deactivate alarm for 12 hrs on the ice & water model press and hold Select Mode for 10 seconds for non ice and water models press and hold any button for 10 seconds.

Non Electronic Display
Non Electronic Display

Door Alarm
Activates if the refrigerator or freezer doors are left open for longer than 2 minutes.
An alarm will sound and the affected compartment icon will flash and the temperature and icons will fade on and off.

· Alarm will sound and icon will flash indicating which door is open. (Ice & water models)
· To silence the alarm for 8 minutes while the door is open press any button (the icons will continue to flash until door is closed).

Error codes
ERROR CODE Communication Error
Non Electronic Display
Sensor ­ Open Circuit / Short Circuit

WHAT IT MEANS… If you see this icon displayed (electronic display models) or the top temperature icon is flashing it means that the control has lost contact with the main control board.
The appliance will operate at its last known setting, all auxillary functions will not work.
If you see this icon displayed (electronic display models) or any combination of the second and fourth temperature icons are flashing it means that an error has been detected on a sensor.
The refrigerator will run in a default cycle to prevent food spoilage.

WHAT TO DO… Turn the unit off at the power point for 5 minutes and then turn it back on.
Under most circumstances this will reset the display enabling normal function to continue.
If the error re-occurs then call for service.
Call for service.

Non Electronic Display

ERROR CODES AND ALARMS 17

CLEANING YOUR REFRIGERATOR
WARNING BEFORE CLEANING: Turn the refrigerator off at the power point and unplug the cord to prevent any chance of electrocuting yourself.
Doors and exterior (white and silver):
You should only clean the doors with lukewarm soapy water and a soft cloth.

CAUTION Never use stainless steel cleaners, abrasive pads or other cleaners that will scratch the surface. Damage to the appliance after delivery is not covered by your warranty.
Interior
Clean the inside of your refrigerator regularly with a soft cloth, unscented mild soap and lukewarm water. Thoroughly dry all surfaces and removable parts and avoid getting water on the controls. Replace removable parts, plug power cord in and switch the power on before returning the food.
Water Tank Assembly
Clean the inside of the water tank regularly with a soft cloth, unscented mild soap and rinse thoroughly with lukewarm water to completely remove any soap residue.
To remove the lid follow these steps: 1. Unclip the front 2 clips and
2. rotate lid up and off the rear clip.
3. Lift lid off tank

2

3

Door seals
Always keep door seals clean by washing them with a mild detergent and warm water, followed by a thorough drying. Sticky food and drink can cause seals to stick to the cabinet and tear when you open the door.
CAUTION Never use hot water, solvents, commercial kitchen cleaners, aerosol cleaners, metal polishes, caustic or abrasive cleaners, or scourers to clean your refrigerator. Many commercially available cleaning products and detergents contain solvents that will damage your refrigerator. Use only a soft cloth with an unscented mild soap and lukewarm water.
To clean a crisper or freezer bin with telescopic extension slides, simply wipe with a damp cloth and warm soapy water. Never immerse the cover in water, as this could affect the operation of the slide.
Switching off your refrigerator
If you switch off your refrigerator for an extended period, follow these steps to reduce the chances of mould: 1. Remove all food. 2. Remove the power plug from the power point. 3. Thoroughly clean and dry the Interior. 4. Ensure that all the doors are wedged open slightly for
air circulation.

1

18 CLEANING

FOOD STORAGE GUIDE

CATEGORY MEAT
POULTRY
SEAFOOD DAIRY FRUIT & VEGETABLES
LEFT OVERS

PRODUCT Sausages and Mince Chops and Steak
Cold Meats

REFRIGERATOR 1-2 Days 3-4 Days
3-5 Days

FREEZER 2-3 Months 4-6 Months
4-6 Months

STORAGE TIPS Keep cold meat at the back of the refrigerator where it is coldest.
Plastic can cause meat to sweat if stored in refrigerator for more than a day.

Roasts

3-5 Days

Chicken Roast Chicken Eggs

1-2 Days 3-5 Days 6 Weeks

Whole fish and fillets Lobster and crabs Prawns

2-3 Days 1-2 Days 1-2 Days

Milk Yoghurt Hard Cheeses Soft Cheeses Butter

Until Expiry Date 7- 10 Days 2 Weeks ­ 2 Months 1-2 Weeks 8 Weeks

Every fruit and vegetable has a different shelf life. Some stay fresh for a couple of days e.g beans, others can last for a couple of months e.g. onions.

12 Months
2 Months 12 Months Not Suitable
2 Months 2 Months 2 Months
Not Suitable Not Suitable 2 Months (Grated) Not Suitable 12 Months
8-12 Months When freezing chop and blanch in small portions.

Roast can take up to 48 hours to defrost properly, transfer frozen roast to the refrigerator 2 days before use.
If poultry takes on a smell or colour you are unsure about it is best to throw it out.
Whole eggs are not suitable for freezing, slightly beaten eggs may be frozen for four months.
Store in an air tight container or foil.
Never freeze prawns in salty water as this will dehydrate the flesh. If dairy takes on a smell or colour and you are unsure about it, it is best to throw it out.
Depending on the variety hard cheese can last from 2 weeks to 2 months. Keep vegetables in the crisper and away from the air vents to avoid freezing.
Don’t wash fruit and vegetables before storing them in the refrigerator as this can make them susceptible to rotting.

Homemade meals

3-4 Days

2-6 Months

Store in sealed container.
Freeze meals in small portion sizes to limit wastage.

IMPORTANT
Please note, use this information as a guide only, actual storage times will vary depending on how you use your refrigerator, climatic conditions and the freshness of the food.

FOOD STORAGE GUIDE 19

TROUBLESHOOTING
Appliance does not operate at desired temperature
In a modern frost free refrigerator / freezer, cold air is circulated around the various compartments through air vents using a high efficiency fan.

CONCERN Refrigerator is too warm
Freezer is too warm
Food is freezing in the refrigerator Unable to change temperature settings

WHAT TO DO Ensure food is allowed to cool before placing inside the refrigerator. Ensure the appliance is set up as per instructions on page 11. Ensure that contents are not obstructing the cooling vents. Ensure the door is not held open or is being opened too frequently. Adjust temperature to a colder setting. Ensure food is allowed to cool before placing inside the freezer. Ensure the appliance is set up as per instructions on page 11. Ensure that contents are not obstructing the cooling vents. Ensure the door is not held open or is being opened too frequently. Adjust temperature to a warmer setting. Ensure that fruit and vegetables are stored in the crisper. Items with a high water content should not be placed near the cooling vents. Refer to function guide in Controlling Your Refirgerator. Ensure that user interface is in “awake” mode before trying to adjust temperature settings.

Crisper Operation CONCERN Excess moisture build up in crisper It is normal for there to be some moisture and humidity in the crisper bin. Crisper bin can not be removed
Freezing items in the crisper

WHAT TO DO Ensure that the crisper is not over packed.
If crisper bin interferes with the door bins, remove door bins before removing crisper. Position cabinet so that the door can be fully opened. Adjust temperature to a warmer setting.

20 TROUBLESHOOTING

TROUBLESHOOTING
Appliance noise Your new refrigerator may make sounds that your old one didn’t make. Because the sounds are new to you, you might be concerned about them. Most of the new sounds are normal. Hard surfaces, like the floor, walls and cabinets, can make the sounds seem louder than they actually are. The following describes the kinds of sounds and what may be making them.

OK

SSSRRR! HISSS! BLUBB!

CLICK! BRRR! CRACK!

SSSRRR!

SSSRRR!

CLICK! CLICK!

HISSS!

HISSS!

BRRR! BRRR!

BLUBB!

BLUBB!

CRACK!

CRACK!

TROUBLESHOOTING 21

Refrigerator operation

CONCERN
Appliance will not run
It is normal for the freezer fan not to operate during the automatic defrost cycle, or for a short time after the appliance is switched on.
Compressor motor seems to run too long
At normal room temperatures, expect your motor to run about 40% to 80% of the time. Under warmer conditions, expect it to run even more often.

WHAT TO DO Ensure that the cord is plugged into a live power outlet and outlet is switched on.
Ensure that the household circuit breaker has not tripped or that the fuse has not blown. The appliance maybe in defrost mode, check again in half an hour. Ensure that the doors are not held open Check that large amounts of warm food have not just been placed inside the appliance. Note that the appliance will run more than normal just after you install it or when adjusting to temperature setting changes.

The exterior of the appliance is warm or hot Ensure the appliance has the external clearances recommended in the section

to touch

“Installing your new appliance”.

This is normal because the appliance transfers heat from the inside out through the outer panels and the divider between the doors. User interface will not respond To ensure settings are not accidentally changed the user interface will go into sleep mode when not in use. Press any button to wake user interface
Alarms Sounding
Frost build up
Odours
Lights not working

The exterior of the cabinet will be much warmer on warmer days it may even feel hot to touch, as the appliance is working harder.
Check that the user interface is in awake mode, refer to section “About the user interface”. Check that the user interface is not locked, refer to section “About the user interface”. If the user interface is frozen turn the appliance off for five minutes for the memory to clear, then turn back on. Check that the user interface is not in Sabbath Mode, refer to control instructions. (I&W models only). Check that all doors are fully closed. Ensure that the over temperature alarm is not being activated by hot food placed in the freezer. Check if the drinks timer has ended, refer control instructions. Check if the Filter Replacement alert is activated, refer control instructions. (I&W models only) Check that all doors are fully closed. Ensure that the doors are not opened too often. Ensure that the return air vents are not blocked with packaging. Ensure the seals are clean and not obstructed. The interior may need cleaning, refer to cleaning guide. Ensure that food is stored correctly as some food, containers and wrapping can produce odours. Check appliance for old or unusual food. Ensure that the cord is plugged into a live power outlet and outlet is switched on.

The LED lighting is designed to dim automatically if the door is left opened for more than 5 minutes and turn off completely if the door is open for more than 7 minutes. Closing the door will reset the timer.
The LED lighting is also designed to turn on gradually.

Ensure that the household circuit breaker has not tripped or that the fuse has not blown. Check that the user interface is not in Sabbath Mode, refer to control instructions.
Check the appliance features section to determine lighting configuration for your model. Check that the doors are closed completely

22 TROUBLESHOOTING

TROUBLESHOOTING
Door operation CONCERN Freezer door pops open.

WHAT TO DO
This is normal and should re-close. This happens when the refrigerator door is closed too quickly.
If the freezer door stays open, it indicates that the appliance needs to be tilted backwards a little further. Refer to section “Installing your new appliance”.

Self close not working. Door not sealing properly
Door difficult to open and close

Check if your appliance has self closing hinges as not all models do.
It indicates that the appliance needs to be tilted backwards a little further. Refer to section “Installing your new appliance”.
Ensure there is nothing that is preventing the door from closing such as appliance contents or items placed near the appliance.
Ensure that the crisper/freezer bin is closed completely. Refit if required as referred to in the section “Using your refrigerator”.
Ensure the appliance is set up as per recommendations.
If the door is difficult to open just after you have closed it this is due to the pressure equalising, the door will open normally after a few minutes.

Automatic Ice maker system CONCERN Ice maker does not produce ice or not enough ice
The icemaker is designed to produce a tray of ice approximately every 3 hours, depending on the conditions.

WHAT TO DO
Ensure that the Ice Maker is switched on at the user interface refer to “About the User Interface” for details.
Ensure water tank is full and contains clean water (if liquids other than clean water have been used, call Electrolux Customer Care). Ensure water tank is securely pushed into pump housing.
If the freezer compartment is too warm, refer to “freezer is too warm” then wait 24 hours for the freezer to reach ideal temperature. Turn the unit off at the mains and leave for 2 minutes then turn the appliance back on (this will reset the icemaker unit). Check for ice production after 24 hours.
Check that there is no obstruction under the ice maker and ensure the ice bin is fitted correctly.

Ice has bad odour or taste

Cover food to ensure ice does not absorb foreign odours.
Interior of appliance or ice bin may require cleaning, refer to “Cleaning your refrigerator”.
Discard stale ice monthly and allow ice maker to produce a fresh supply.

If you still require service
If you have a problem, and the problem persists after you have made the checks mentioned, contact your nearest Electrolux approved Service Centre or the dealer you bought the refrigerator from. Be ready to quote the model number, the 9-digit PNC and 8-digit serial number, which is stated on the label inside the refrigerator compartment.

TROUBLESHOOTING 23

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>