5B28S6 Range Extender for Ring Alarm Instruction Manual
- June 5, 2024
- Ring
Table of Contents
5B28S6 Range Extender for Ring Alarm
Overview
Parts
First, complete the in-app setup
- Make sure your Ring Alarm is disarmed.
- In the Ring app, tap Set Up a Device and find the Range Extender in the Security menu.
- Follow the in-app instructions to complete setup.
Then, install the device in your home
- Choose an outlet between your Base Station and some of the devices farthest from your Base Station.
- Leave the Range Extender plugged into an outlet at all times. You can move the Range Extender to another socket as needed to expand the range of your Z-Wave network.
SAFETY AND COMPLIANCE INFORMATION
Use Responsibly. Read all instructions and safety information before use.
WARNING
Failure to read and follow these safety instructions before operation could
result in fire, electric shock, or other injury or damage.
CAUTION
To reduce the risk of electrical shock, DO NOT open the unit. There are no
user-serviceable parts inside the unit. Refer to customer support for any
repairs.
WATCH FOR SMALL PARTS
Your device and accessories may present a choking hazard to small children.
Keep them out of reach of small children.Ring Range Extender is for indoor use
only. Do not expose your device to liquids. If your device or adapter gets
wet, carefully unplug the device without getting your hands wet and wait for
the device to dry completely before plugging it in again. Do not attempt to
dry your device with an external heat source, such as a microwave oven or a
hair dryer. If the device appear damaged, discontinue use immediately. To
avoid risk of electric shock, do not touch your device during a lightning
storm. When this device is plugged into an electrical socket-outlet,
unplugging this device will disconnect it from the AC mains supply. Only plug
this device into an easily accessible socket outlet.
BATTERY SAFETY
HANDLE WITH CARE
Your device contains a rechargeable lithium-ion polymer battery and should
be replaced only by a qualified service provider. Do not disassemble, open,
crush, bend, deform, puncture, shred or attempt to access the battery in your
device. Do not modify or remanufacture the battery, attempt to insert foreign
objects into the battery, or immerse or expose it to water or other liquids,
expose to fire, explosion or other hazard. Only use the battery for the system
for which it is specified. Use of an unqualified battery or charger may
present a risk of fire, explosion, leakage or another hazard. Do not short-
circuit a battery or allow metallic conductive objects to come into contact
with battery terminals. Avoid dropping the device or battery. If the device or
battery is dropped, especially on a hard surface, and the user suspects
damage, do not attempt repair. Contact Ring Customer Service for assistance.
PRODUCT SPECIFICATIONS
- Model Number: 5B28S6
- Electrical Rating: 100-240V ~50/60Hz 40mA
- Temperature Rating: 0°C – 40°C
DECLARATION OF CONFORMITY
Hereby, Ring LLC, declares that the radio equipment Ring Range Extender
(5B28S6) is in compliance with Directive 2014/53/EU and relevant UK statutory
requirements. The full text of the EU Declarations of Conformity are available
at the following internet address: ring.com/doc.pdf.
RADIOFREQUENCY COMPLIANCE
In order to protect human health, this device meets the thresholds for
exposure of the general public to electromagnetic fields according to Council
Recommendation 1999/519/EC. This device should be installed and operated with
at least 20 cm between the radiator and your body.
- Wireless Features: Z-Wave
- Maximum Effective Radiated Power:
- 868.40 – 869.85 MHz 3.47 dBm ERP
RECYCLING YOUR DEVICE PROPERLY
In some areas, the disposal of certain electronic devices is regulated. Make
sure you dispose of, or recycle, your device in accordance with your local
laws and regulations.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>