FINESTRA Miner GTW-000061-915 Helium Network Compatible User Guide
- June 5, 2024
- FINESTRA Miner
Table of Contents
Preparing your FinestraMiner.
1 Download App
Make sure your mobile phone is connected to Wifi and your Bluetooth is turned
on. Download the Helium Hotspot App onto your phone.
https://apps.apple.com/us/app/helium-hotspot/id1450463605
https://play.google.com/store/apps/details?id=com.helium.wallet&hl=tr&gl=US
2. Set up a Helium account. Open the Helium app and follow the setup instructions to set your account up. While setting up you will be shown 12 security keywords. Note them down using the included note card 1 and pen and store them safely. 1 You will need these to recover your 1 account if you lose your password.
3. Attach Antenna. Power Up.
Carefully screw the included antenna into the jack on the side of
FinestraMiner. Plugin the power cable 1 into the base of FinestraMiner and
plug it into the power supply. Plug the power 1 supply into a wall outlet.
4. Connect FinestraMlner to Helium. Using the Helium App, pair your phone with FinestraMiner. And then follow the instructions to connect 1 FinestraMiner to the Helium Network.
Locating your FinestraMiner.
1. The FinestraMiner
works best when it is placed near a window with minimal external obstructions.
Depending on the window, and the availability of a power outlet, you may
even attach it to a windowpane using the adhesive base. Follow the
instructions in “Mounting your FinestraMiner”.
2. Do not place the
FinestraMiner near a metal mesh, screens, or large metallic objects.
Water tanks or even large vehicles such as a truck parked outside could affect
performance. Also do try to ensure that any other electronic devices are
placed a few feet away from FinestraMiner.
Mounting your FinestraMiner.
1. Peel it.
FinestraMiner comes equipped with a reusable adhesive base. This allows it to
be placed in the most advantageous indoor locations for best performance –
even on sloping or vertical surfaces which are flat and smooth.
2. Stick it.
Activate the reusable backing by peeling off the protective covering – use
tweezers if needed. Once removed press your FinestraMiner firmly against any
flat smooth surface you planned to mount it on.
3. Remove it.
Move it. To remove or move your FinestraMiner just grasp the edges firmly and
pull away with a twisting motion to lift one of the edges. Then pull away
further to separate it from the surface. Do not try to forcibly pull
FinestraMiner directly away from a surface – always pull back with a twisting
motion.
4. Wipe each time.
Each time you remove FinestraMiner, wipe the adhesive backing with a clean
damp cloth to refresh the stickiness. Make sure that the backing is completely
dry before use.
smart mimic
Support
t hefinestra.com/support
Smart Mimic, FinestraMiner, and the logos are the trademarks o Smart Mimic,
Inc.
Helium and the Helium logo are the trademarks ks of Helium, Inc.
Apple and the Apple logo are trademarks of Apple Inc.
Google Play and the Google Play logo are trademarks of Google LLC.
© Copyright 2021 Smart Mimic, Inc. All rights reserved.
SM-HW-BR-FN-01 Layout Version: 0.8 FINESTRA Miner
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>