PIBOX Video Capture Card User Manual
- June 5, 2024
- PIBOX
Table of Contents
PIBOX Video Capture Card
STEPS FOR USB VIDEO CAPTURE (OBS)
-
Install & Open the OBS software and Add new source
-
Choose “Video Capture Device”
-
Click:USB Video-Custom-1920*1080-Match-MJPEG Choose the “Resolution” and “FPS” that match your device.
-
Set the audio output as following: ( the “Use custom audio device”)
-
Click “settings” in the bottom right of OBS Studio
Click “Audio”at the left;Click “48K at Sample Rate
Click “Stereo”at Voice Channel; Click “USB Audio Device at Mic/Auxiliary Audio Device.
When the audio setting is finished, restart the OBS audio system [ otherwise it will cause no sound output ] -
Click “Studio Mode”
Click “Double Window (Optional)
Click “Start Recording”
Note
Computer hardware configuration requirements
CPU:PC i5-3400 or above;
NB 17-3537U2.0GHZ or above
Graphics card: PC NVIDIA GT630 or above
NC NVIDIA GT735M or above
Run memorv :4G RAM
Product Introduction
This USB 3.0 capture card can capture HDMI video. and HDMI audio at the same
time, and can transmit
audio and video signals to a computer or smartphone
for preview and storage. Suitable fm high-definition acquisition, teaching
recording, medical 1mag1ng, etc.
Product Specifications
- HDMI resolution: Max to 3840×2160@60Hz
- Video input format: 8/10/12b ,t Deep color
- Video output format: YUV/JPEG
- Video output resolution: Max to 1920×1080@60Hz Support audio format L-PCM
- Support most acquisition software, such as VLC /OBS/ Amcap, etc
- Supports multiple OS- Windows MacOS Interface: USB 3 .
- Conform to USB Video and UVC standard; USB Audio UAC standard
- Max working current: 0.4N5V DC
- Dimension (L x W x H): 64x28x8 (mm)
- Operating temperature range: (-10 to + 55 °C) Weight 21.4g
Packaging Includes
1 Audio Video Capture Card
1 User Manual
Features
- Without an external power supply, compact and portable
- Easy to do live streaming, no driver needed
- Works with most devices, such as PC.Laptop. Linux System, Mac, Camera
- Works with ZOOM,OBS, XBOX,Youtube, Face Live,
- Twitter, Twitch and more
- Easy Setup, just add the server host and token of your lrve
Connecting operation
- Connect the UHD signal source with the HDMI input port of the USB capture card through 1 HDMI cable.
- Plug the USB male header of the USB capture card into the USB port of the computer.
- Acquis·1tion steps (OBS): Open the software …. add a new so urce ….. select ‘video capture device’ …. set the screen size -+select ‘Studio Mode’ (dual window) -+ click ‘Start Recording'(as shown in the example below).
Note:
Computer hardware configuration requirements CPU: PC iS-3400 or above; NB i7-3537U 2.0GHZ or above Graphics card PC NVIDIA GT630 or above; NC NVIDIA GT735M or above
Storage: 4G RAM
FAQ and TIPS: Whatsapp – ” VC50G2TS “
- What latency is expected with the device? * This depends on your PC config and if its Intel I5 -7th Gen or higher-
- Phone Screen – Does not capture video out -Whats wrong?*
- Check if your phone supports video out. Connect phone directly to a TV and see if it works. Refer: Pibox.in/willcwork.
- What can you do to improve latency? * Allocate higher CPU priority to OBS. Check background processes and make sure no other applications are using resources.
- Why is the device warm?*
Its normal to see the device warm. We are using the vents to bring out the heat.
WhatsApp : +91-8072238441 Email: SUPPORT@PIBOX.IN
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>