DELL 5010 Wyse Cloud Client User Guide

DELL 5010 Wyse Cloud Client

Specifications

• Model: Dell Wyse Cloud Client Wyse 5010
• Power on/off button and light
• Activity light
• USB 2.0 port (2x)
• Headphone/microphone jack
• Vertical Stand
• Wireless antenna port (2x) (optional)
• Display Port connector
• DVI-I port [1x DVI-D / 1x VGA]
• Product Information tab
• USB 2.0 port (2x)
• Network port, 10/100/1000 Base-T or SFP
• +19V Power adapter input
• Lock receptacle

Install the vertical stand

To install the vertical stand, follow these steps:

1. Place the Dell Wyse Cloud Client Wyse 5010 on a stablesurface.
2. Attach the vertical stand to the back of the device by aligning the stand’s connectors with the corresponding slots on the device.
3. Gently push the stand towards the device until it locks into place.

Connect the keyboard and mouse
To connect the keyboard and mouse to the Dell Wyse Cloud Client Wyse 5010, follow these steps:

1. Locate the USB ports on the device.
2. Connect the USB end of the keyboard cable to one of the USB ports.
3. Connect the USB end of the mouse cable to another USB port.

Connect the network

To connect to the network, you have two options:

• Option 1: Ethernet Connection (10/100/1000 Base-T)
  1. Locate the network port on the device.
  2. Connect one end of the Ethernet cable to the network port.
  3. Connect the other end of the Ethernet cable to your network switch or router.
• Option 2: Fiber SFP Connection
  1. Locate the Fiber SFP module on the device.
  2. To remove the Fibre SFP module, rotate the latch and unplug it from its slot.
  3. Connect the Fiber SFP module to your fiber optic network using a compatible fiber optic cable.

Connect the display

To connect the display to the Dell Wyse Cloud Client Wyse 5010, follow these steps:

• Option 1: DVI-I Connection

  1. Locate the DVI-I port on the device.
  2. Connect one end of the DVI-I cable to the DVI-I port.
  3. Connect the other end of the DVI-I cable to your display’s DVI
     input port.

• Option 2: VGA Connection

  1. Locate the VGA port on the device.
  2. Connect one end of the VGA cable to the VGA port.
  3. Connect the other end of the VGA cable to your display’s VGA input port.

Quick Start Guide

Install the vertical stand

Or use Dell-approved mounting accessory kit

Connect the keyboard and mouse

USB Connector

Connect the network

Network connector

Wireless antenna

Fiber SFP module

NOTE: To remove the Fibre SFP module, rotate the latch and unplug it from its slot.

Connect the display

Display Port connector

DVI-I connector

VGA adapter

Connect the power cable on your client device

Client device power connector

Display power connector

NOTE: Your client device is ready to use when the client device activity light goes off.

Turn on your client device and display

Product support and manuals
dell.com/support
dell.com/support/manuals

Contact Dell
dell.com/contactdell

Regulatory and safety

dell.com/regulatory_compliance

Regulatory model
Dx0D

Client device model
Dell Wyse Cloud Client Wyse 5010

Features

NOTE: Components may vary based on model and location.

1. Power on/off button and light
2. Activity light
3. USB 2.0 port (2x)
4. Headphone/microphone jack
5. Vertical Stand
6. Wireless antenna port (2x) (optional)
7. Display Port connector
8. DVI-I port [1x DVI-D / 1x VGA]
9. Product Information tab
10. USB 2.0 port (2x)
11. Network port, 10/100/1000 Base-T or SFP
12. 19V Power adapter input
13. Lock recptacle

References

• Support | Dell US
• Manual-Hub.com – Free PDF manuals!

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>