COSTWAY MU10073US Electronic Piano User Manual

USER’S MANUAL
Electronic Piano
MU10073US 

THIS INSTRUCTION BOOKLET CONTAINS IMPORTANT SAFETY INFORMATION. PLEASE READ ANO KEEP FOR FUTURE REFERENCE.

Contact Us!
Do NOT return this item.
Contact our friendly customer service department for help first.

Before You Start
Please read all instructions carefully and keep it for future reference.
WARNING
Attention: The Product is not suitable for the children under 3 years
Danger: Keep all small parts and packaging materials for this product away from babies and children, otherwise they may pose a choking hazard.

**General Warnings:

**

The product must be installed and used under the supervision of an adult.
Read through each step carefully and follow the proper order.
  Remove all packaging, separate and count all parts and hardware.
  Please ensure that all parts are correctly installed, incorrect installation can lead to a danger.
  We recommend that, where possible, all items are assembled near to the area in which they will be placed in use, to avoid moving the product unnecessarily once assembled.
  Ensure a secure surface during construction, and place the product always on a flat, steady and stable surface. 

Panel Function Diagram

Please charge before use!

Charging indicator:

1. TYPE-C interface
2. It is not applicable to PD fast charging line
3. The charging indicator is red and turns green when it is full
4. Battery: charging time is about 4H, please charge it more than 6H for the first time
5. Power adapter: 5V/2A

Low voltage prompt:

When the lithium battery voltage is too low (below 3.6V), the symbol of low voltage is constantly flashing on the display screen. Please charge it in time.
If you do not play the piano for ten minutes, the system will automatically go to sleep.
Interface:
SUS: Sustain pedal
MP3: MP3
MIC: Microphone
: Headphone/ Speaker
USB: TYPE-C charging/ MIDI interface
Function:
Volume adjustment, Start and stop, Tone, Rhythm, Demo, Record/play, Metronome, Keyboard light (LED) switch, Tempo, Pitch, Split, Chord, Learn, Sustain, Vibrato, Drum kit, Velocity, low voltage display, Bluetooth connection successful.
Volume
Rotate the encoder left and right to adjust the volume, the default boot volume is 12 (from 00-16).
Start/ Stop
Press the encoder gently to enter the rhythm playing mode. Rotate the encoder left and right to select the rhythm from 000 to 127 (see attached rhythm table).
The sequence number and rhythm name will be displayed on the screen.
When turning on the rhythm and demo music, gently press the encoder to stop the rhythm and demo music.
Tone
Press and hold the tone button and rotate the encoder from left to right to select the tone from 000 to 127 (see the attached tone table). The serial number and the name of the
adjusted tone will be displayed on the screen.
After releasing the tone key, return to the initial interface and rotate the encoder to adjust the volume.
Demo

1. Short press the demo button to play the demo. Press the demo button again to stop the playback.
   During the playback of the demo and after stopping the playback, rotate the encoder left and right to select the demo from 000-020.

2. Press and hold the demo button and rotate the encoder from left to right to select the demo from 000-020 (see the attached demo table).
   Note: Only choose not to play the demo and the serial number and the demo name of the adjustment will be displayed on the screen.
   At this point, after releasing the demo button, and press the encoder twice , return to the initial interface and rotate the encoder to adjust the volume.

Record/ Play (long press is record, short press is Play)

1. Press and hold the record/ Play button and then RECODE ON will appear on the screen. At this time, press the Record button on the keyboard panel to record MIDI signals.
2. Then press the record/ Play button, and the display screen will display REC Play ON, that is, the last recorded signal can be played.
   After the playback, go back to the initial interface and rotate the encoder left and right to adjust the volume.

Tone & Demo Selection

1. During the playback of the Demo and after stopping the playback, rotate the encoder left and right to select the Demo.
2. Press the Demo button on the keyboard panel and rotate the encoder from left to right to select the Demo. Note: Only choose not to play the Demo.
3. During the playback of the Tone and after stopping the playback, rotate the encoder left and right to select the Tone.

Metronome & Keyboard light (LED)

1. Press the metronome button and the metronome will display the beat selection of 1/4, 2/4, 3/4 and 4/4.
2.  Long press the metronome button, and the keyboard light will turn on or off.
   The display screen will display LED ON or LED OFF.

Note: This feature requires the purchase of a piano with a keyboard light.

Feature selection

1. Long press the encoder switch and rotate the encoder selection function
   (TEMPO, PITCH, SPLIT,
   CHORD, LEARN, SUSTAIN, VIBRATE, DRUM KIT, and VELOCITY).

2. After the selection, gently press the switch to select the function to be changed, such as TEMPO.
   At this point the rotary encoder changes the TEMPO value.

3. After changing the function, gently press the switch or long press the switch to return to the previous function selection interface, and rotate the encoder selection function (TEMPO, etc.).
   Press the switch again and return to the initial interface. Rotate the encoder left and right to adjust the volume.

4. Double-click the switch in any state to return to the initial interface, and rotate the encoder left and right to adjust the volume.

TEMPO

1. Long press the encoder switch and rotate the encoder to select the TEMPO.
2. Gently press the switch, then rotate the encoder left and right. The PITCH can be selected from 40 to 280, and the default is 120.

PITCH

1. Long press the encoder switch and rotate the encoder to select the PITCH.
2. Gently press the switch, then rotate the encoder from left to right. The PITCH can be selected from -6 to +6, and the default is +0.

SPLIT

1. Long press the encoder switch and rotate the encoder to select the SPLIT.
2. Gently press the switch, and then rotate the encoder around, you can choose whether the SPLIT is on or off.
   

This function can divide the 88 keys into two vocal ranges for playing.
Before segmentation, the left keyboard was A1-B4, and after segmentation, it was A2-B5.
Before segmentation, the right keyboard was C5-C9, and after segmentation, it was C3-C7.
When the split function is turned on, the host part can be used as a separate 44-key keyboard (the secondary part does not need to be connected). When connected to the secondary part, it is a complete 88-key electric piano.

CHORD

1. Long press the encoder switch and rotate the encoder to select CHORD.
2. Press the switch gently and rotate the encoder from left to right to select SINGLE, FINGERS and OFF.
   During the playing of rhythm, the system enters the chord mode. Chord function: Press the key in the area A1-F4# to play the chords that match the rhythm, and the tone of the chords changes with the pitch of the harp.

LEARN

1. Long press the encoder switch and rotate the encoder to choose LEARN.
2. Gently press the switch, then rotate the encoder left and right to choose the teaching mode (teaching A, teaching B, and OFF).
   Teaching A: Select different demo music and short press the Demo button to enter the teaching mode.
   Playing any key can play the main melody of the demo song, keyboard lights with the main melody on and off.
   Teaching B: Select different demo music, short press the Demo button to enter the teaching mode. The keyboard keys light up with the main melody, and the user presses the corresponding correct key to light the next note light; if the user presses the wrong key, it will pause until the correct key  is pressed to light the next note.

SUSTAIN

1. Long press the encoder switch and rotate the encoder to choose SUSTAIN.
2. Gently press the switch, then rotate the encoder left and right to choose whether the sustain is on or off.
   Turn on the sustain function, and make the tone produce the effect of continuance in performance.

VIBRATE

1. Long press the encoder switch and rotate the encoder to select VIBRATE
2. Gently press the switch, then rotate the encoder left and right to choose whether the vibrator is on or off.
   Turn on the vibrato function to produce the tremolo effect in the performance.

DRUM KIT

1. Long press the encoder switch and rotate the encoder to select DRUM KIT
2. Gently press the switch, then rotate the encoder left and right to choose whether the drum kit is on or off.
   When the drum kit is on, all the keys are turned on to become the percussion tone, and when the drum kit is off, the percussion tone is turned off.

VELOCITY

1. Long press the encoder switch and rotate the encoder to select VELOCITY.
2. Gently press the switch, then rotate the encoder left and right to choose whether the velocity is on or off.
   When the velocity is on, press the key with greater force and the sound will be louder. The default strength is on.

Sleep switch:

Long press the encoder switch, rotate the encoder to choose the sleep switch.
The default mode is sleep mode on. In the default mode, when the piano is not played after 10 minutes, the electric piano will turn off.
If you are in Sleep Mode off state, it will always be on.
DEMO

Bluetooth APP functions:

iPhone connection:
piano connection:

1. Search and download POPiano APP from App store of the iPhone.
2. Open the piano App after turning on the Bluetooth of the iPhone, select any song, and choose to start playing after entering.
3.  Click on the upper right of the iPhone screen , and then you can choose: connect to the piano through Blue Tooth – Confirmed, next- confirm to connect to the piano.
4. After confirming Bluetooth connection, the icon is displayed as blue checkmark

GarageBand connection:

1. Open GarageBand App,
2. Turn on bluetooth on your phone.
3. Open GarageBand App and click the Settings icon in the upper right corner of the screen.
4. Connect the piano’s bluetooth through : Song Settings – Advanced – Bluetooth MIDI Devices.

Perfect Piano and PianoBar connection:

1. Download the Perfect Piano App and PianoBar.
2. Turn on bluetooth on your phone.
3. First connect the GarageBand App. When the Garage Band App is successfully connected to your bluetooth, then open the Perfect Piano App and PianoBar can be used directly.

Android phone connection:

POPiano connection:

1. Search and download PO Piano APP from App store of the mobile phone.
2. Turn on the bluetooth function, some phones need to turn on the phone location function.
3. Open the PO Piano App to select any song, and choose to start playing after entering.
4. Click on the upper right of the mobile phone screen , and then you can choose: connect to the piano through: Blue Tooth – Confirmed, next- confirm to connect to the piano.
5.  After confirming bluetooth connection, the icon is displayed as blue check mark

Tone Table

88. Pad 1 (newage)
3. Honky-Tonk Piano
4. Rhodes Piano| 47. Timpani  Choral ensembles| 89.Pad 2 (warm)
90.Pad 3 (polysynth)
5. Chorused Piano
6. Harpsichord| 48. String Ensemble 1| 91. Pad 4 (choir)
7. Clavinet| 49. String Ensemble 2
50. SynthStrings 1
51. SynthStrings 2
52. Choir Aahs| 92.Pad 5 (bowed)
93.Pad 8 (metallic)
94.Pad 7 (halo)
95.Pad B(sweep)
Percussion Instrument
8. Celesta
9. Glockenspiel
10. Music Box| 53. Voice Oohs| FX
11. Vibraphone| 54. Synth Voice| 96. FX 1 (rain)
12. Marimba| 55. Orchestra Hit| 97. FX 2 (soundtrack)
13. Xylophone| Brass| 98. FX 3 (crystal)
14. Tubular Bells| 56. Trumpet| 99. FX 4 (atmosphere)
15. Santur| 57. Trombone| 100. FX 5 (brightness)
Organ| 58. Tuba| 101. FX 6 (goblins)
16. Hammond Organ| 59. Muted Trumpet
60. French Hom| 102.FX 7 (echoes)
103.FX 8 (=•)
17. Percussive Organ
18. Rock Organ| 61. Brass Section| National Instrument
19. Church Organ| 62. Synth Brass 1| 104. Sitar
20. Reed Organ| 63. Synth Brass 2| 105. Banjo
21. Accordion| Reed Instruments| 106. Suntan
22. Harmonica| 64. Soprano Sax| 107. Koto
23. Bandoneon| 65. Alto Sax| 108. alimba
Guitar| 66. Tenor Sax| 109. Bagpipe
24. Acoustic Guitar (nylon)| 67. Baritone Sax| 110. Fiddle
25. Acoustic Guitar(steel)| 68. Oboe| 111. Shansi
28. Electric Guitar (Jazz)| 69. English Horn| Percussion Music
27. Electric Guitar (dean)| 70. Bassoon| 112. Tinkle Bell
28. Electric Guitar (muted)| 71. Clarinet| 113. Agogo
29. Overdriven Guitar| Tongue
72. Piccolo| 114.Steel Drums
115.Woodblock
30.Distortion Guitar
31.Guitar Harmonics| 73. Flute| 118. Talko Drum
Bass| 74. Recorder| 117. Melodic Tom
32. Acoustic Bass| 75. Pan Flute| 118. Synth Drum
33. Electric Bass(finger)| 76. Bottle Blow| 119. Reverse Cymbal
34. ElectrIc Bass(plck)| 77. Skakuhachi| FxPhone
35. Fretless Bass| 78. Whistle| 120. Guitar Fret Noise
38. Slap Bass 1| 79. Ocarina| 121. Breath Noise
37. Slap Bass 2| Soft Leads| 122. Seashore
38. Synth Bass 1| 80. Lead 1 (square)| 123. Bird Tweet
39. Synth Bass 2| 81.Lead 2 (sawlooth)
82.Lead 3 (calliope lead)| 124.Telephone Ring
125.Helicopter
String solo
40. Violin| 83.Lead 4 (chiff lead)
84.Lead 5 (chanimg)| 126.Applause
127.Gun shot
41. Mote

Rhythm Table

Please give us a chance to make it right and do better!
Contact our friendly customer service department for help first.
Replacements for missing or damaged parts will be shipped ASAP!
Follow Costwayhttp://www.costway.com/hysalesrule/qr

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>