ASUS E510MA Portable Laptop User Guide
- June 5, 2024
- Asus
Table of Contents
First Edition / September 2021
Customer Self Repair (CSR)
Maintenance and Service Guide
COPYRIGHT INFORMATION
No part of this manual, including the products and software described in it,
maybe reproduced, transmitted, transcribed, stored in a retrieval system, or
translated into any language in any form or by any means, except documentation
kept by the purchaser for backup purposes, without the express written
permission of ASUSTeK COMPUTER INC. (“ASUS”).
ASUS PROVIDES THIS MANUAL “AS IS” WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESS
OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE IMPLIED WARRANTIES OR CONDITIONS
OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. IN NO EVENT SHALL
ASUS, ITS DIRECTORS, OFFICERS, EMPLOYEES, OR AGENTS BE LIABLE FOR ANY
INDIRECT, SPECIAL, INCIDENTAL, OR CONSEQUENTIAL DAMAGES (INCLUDING DAMAGES FOR
LOSS OF PROFITS, LOSS OF BUSINESS, LOSS OF USE OR DATA, INTERRUPTION OF
BUSINESS AND THE LIKE), EVEN IF ASUS HAS BEEN ADVISED OF THE POSSIBILITY OF
SUCH DAMAGES ARISING FROM ANY DEFECT OR ERROR IN THIS MANUAL OR PRODUCT.
Products and corporate names appearing in this manual may or may not be
registered trademarks or copyrights of their respective companies, and are
used only for identification or explanation and to the owners’ benefit,
without intent to infringe.
SPECIFICATIONS AND INFORMATION CONTAINED IN THIS MANUAL ARE FURNISHED FOR
INFORMATIONAL USE ONLY, ARE SUBJECT TO CHANGE AT ANY TIME WITHOUT NOTICE, AND
SHOULD NOT BE CONSTRUED AS A COMMITMENT BY ASUS. ASUS ASSUMES NO
RESPONSIBILITY OR LIABILITY FOR ANY ERRORS OR INACCURACIES THAT MAY APPEAR IN
THIS MANUAL, INCLUDING THE PRODUCTS AND SOFTWARE DESCRIBED IN IT.
Copyright © 2020 ASUSTeK COMPUTER INC. All Rights Reserved.
LIMITATION OF LIABILITY
Circumstances may arise where because of a default on ASUS’ part or other
liability, you are entitled to recover damages from ASUS. In each such
instance, regardless of the basis on which you are entitled to claim damages
from ASUS, ASUS is liable for no more than damages for bodily injury
(including death) and damage to real property and tangible personal property;
or any other actual and direct damages resulting from omission or failure of
performing legal duties under this Warranty Statement, up to the listed
contract price of each product.
ASUS will only be responsible for or indemnify you for loss, damages, or
claims based on contract, tort, or infringement under this Warranty Statement.
This limit also applies to ASUS’ suppliers and its reseller. It is the maximum
for which ASUS, its suppliers, and your reseller are collectively responsible.
UNDER NO CIRCUMSTANCES IS ASUS LIABLE FOR ANY OF THE FOLLOWING: (1) THIRD-
PARTY CLAIMS AGAINST YOU FOR DAMAGES; (2) LOSS OF, OR DAMAGE TO, YOUR RECORDS
OR DATA; OR (3) SPECIAL, INCIDENTAL, OR INDIRECT DAMAGES OR FOR ANY ECONOMIC
CONSEQUENTIAL DAMAGES (INCLUDING LOST PROFITS OR SAVINGS), EVEN IF ASUS, ITS
SUPPLIERS OR YOUR RESELLER IS INFORMED OF THEIR POSSIBILITY.
SERVICE AND SUPPORT
Visit our multi-language website at: https://www.asus.com/support/
Disclaimer
ASUS is not responsible for direct, indirect, intentional, or unintentional damages resulting from improper installation and operation.
Safety precautions
- Keep liquids or moisture away from your Notebook PC before installing or removing any components.
- Place your Notebook PC on a stable surface before installing or removing any components.
- Detach the clip or flap before removing the signal cables to prevent damage.
- Disconnect the power plug by pulling the plug evenly to avoid damage. Ensure to connect the signal cables in the correct orientation.
- Disconnect all power cables and remove the battery pack (if applicable) before cleaning your Notebook PC with liquid detergent to avoid the risk of electric shock.
- Disconnect all power cables and remove the battery pack (if applicable) before installing or removing any components. Be sure to thoroughly read and follow the instructions in the manual.
- To avoid Electrostatic Discharge (ESD) damage to the electric components inside your computer, before handling components, use a grounded wrist strap or touch a safely grounded object to prevent electric products damaged by the electrostatic discharge. Please refer to Electrostatic Discharge (ESD) Protection Notes.
- Keep liquids or moisture away from your Notebook PC to avoid short-circuiting.
- Hold components by the edges to avoid touching the Integrated Circuits (ICs).
- Before re-connecting the AC power, ensure all components are properly installed.
- Reduce the risk of fire or explosion by avoiding incompatible power adapters or batteries. Use only certified power adapters or batteries supplied by ASUS or authorized retailers.
- Ensure the correct screw models are re-installed on your Notebook PC to prevent damage.
Protection of Stored Data
For Your important data, please make periodic backup copies of all the data
stored on the hard disk or other storage devices as a precaution against
possible failures, alteration, or loss of the data.
ASUS AND ITS AFFILIATES WILL NOT BE HELD LIABLE FOR ANY OF YOUR CONFIDENTIAL,
PROPRIETARY, OR PERSONAL DATA NOR ANY LOST OR CORRUPTED DATA, PROGRAMS, OR
SOFTWARE. IF YOUR DATA IS ALTERED OR LOST DUE TO ANY TROUBLE, FAILURE, OR
MALFUNCTION OF THE PRODUCT AND THE DATA CAN NOT BE RECOVERED, WE SHALL NOT BE
LIABLE FOR ANY DAMAGE OR LOSS TO DATA, SYSTEM, NETWORK, OR ANY OTHER DAMAGE
RESULTING THEREFROM. WHEN COPYING OR TRANSFERRING YOUR DATA, PLEASE BE SURE TO
CONFIRM WHETHER THE DATA HAS BEEN SUCCESSFULLY COPIED OR TRANSFERRED PRIOR TO
THE PROVISIONING OF SERVICES BY THE US. WE DISCLAIM ANY LIABILITY FOR THE
FAILURE TO COPY OR TRANSFER THE DATA CORRECTLY AND WILL HAVE NO LIABILITY FOR
ANY ACTS OR OMISSIONS, INCLUDING NEGLIGENCE, BY ASUS OR A THIRD-PARTY SERVICE
PROVIDER.
Installation tools
| | |
---|---|---|---
Screwdriver| Non-conductive pry tool| Tweezers| Anti-static gloves
Before disassembly
A. Before your disassembly, we strongly recommend that you prepare a
smartphone or other handheld camera. During disassembly, use your camera to
take photos to help you remember the order of assembly and the location of
parts. B. When lifting the base cover off, slowly and carefully open it so
the angle is as small as possible. To avoid damaging the cables, please
confirm they are disconnected before opening the base cover completely.
C. After
you open the base cover, be sure to disconnect the battery cable first. D.
When replacing components, if any materials, cables, tapes, and others were
touched or moved, please return them to their original location before
proceeding.
E.
Avoid using too much force when fastening screws to prevent hardware damage.
Removing the base cover
Disassembly Notice
NOTE: The appearance of your Notebook PC’s bottom view may vary per
model.
A. Remove the screw(s) from the Notebook PC’s base cover.
Assembly Notice
B.
Use the non-conductive pry tool to lift open the indicated area of the base
cover as shown in the illustration. 
Disassembly Steps:
IMPORTANT! Avoid sliding the non-conductive pry
tool along the side of your Notebook PC to prevent damage.
C. Pull out the base cover and
remove it completely from your Notebook PC.
Installing an M.2 card (SSD)
Refer to the following steps when installing a compatible M.2 card (SSD) in
your Notebook PC:
IMPORTANT! Purchase your M.2 card from authorized retailers of this
Notebook PC to ensure maximum compatibility and reliability.
WARNING! Disconnect all the connected peripherals, any telephone or
telecommunication lines, and power connectors (such as external power supply,
battery pack, etc.) before removing the base cover.
NOTE :
- The appearance of your Notebook PC’s bottom view and M.2 card may vary per model but the module installation remains the same.
- It is recommended that you install the M.2 card under professional supervision. You may also visit an authorized service center for further assistance.
Disassembly Notice
A. Before handling components, wear anti-static gloves to avoid damaging
them due to static electricity.
B. Remove the base cover.
NOTE: For more details, refer to the removing the base cover section in
this manual.
C. Disconnect the cable from the battery connector.
Disassembly Steps:
- Use the non-conductive pry tool to push the iron sheet.
- Use the non-conductive pry tool to disconnect the battery connector.
Disassembly Notice
D. Remove the M.2 card (SSD).
NOTE : If there is material posted on the M.2 card (SSD) when you replace
M.2 card (SSD), please paste the material on the new M.2 card (SSD). (Not
included specification label.)
Disassembly Steps:
- Remove the screw*1pc and M.2 card (SSD).
- Tear off the Thermal PAD from M.2 card (SSD). Please keep this part, it will be reused for new SSD installation.
Assembly Notice
E. Paste the Thermal PAD to the new M.2 card (SSD).
F. Assembly the M.2 card (SSD).
Assembly steps:
- Align and insert the new M.2 card into the module slot.
- Secure the M.2 card in place by fastening the screw.
G. Please follow the below steps to attach the battery connector.
Assembly Notice
H. Install the base cover at a slight tilt on the upper side first, and then press the upper side of the base cover to fix from right to left.
I. Put the base cover down
slowly, and then press the left and right side of the base cover to fix, and
press the lower side of the base cover to fix.
J. Secure the base cover in place using the
screws.
Customer Self Repair Guide
Documents / Resources
| ASUS
E510MA Portable
Laptop
[pdf] User Guide
E510MA Portable Laptop, E510MA, Portable Laptop
---|---
| ASUS
E510MA Portable
Laptop
[pdf] User Guide
E510MA Portable Laptop, E510MA, Portable Laptop, Laptop
References
- Official Support | ASUS Global
- [Customer Self Repair] Electrostatic Discharge (ESD) Protection Notes | Official Support | ASUS Global
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>