Prevention B09N3L58TF circul+ Wellness Ring Sleep and Wireless Activity Tracker User Guide

: June 5, 2024
: Prevention

Table of Contents

RING DIAGRAM
CHARGING YOUR RING
DOWNLOAD APP & REGISTER
BLUETOOTH ACTIVATION
REGISTERING + PAIRING
RING POSITIONING
SPACER RING
ACTIVATE MONITORING
END MONITORING
PREVENTION+ BODIMETRICS
Read User Manual Online (PDF format)
Download This Manual (PDF format)

Prevention B09N3L58TF circul+ Wellness Ring Sleep and Wireless Activity Tracker

RING DIAGRAM

Green charging indicator
Indicateur de charge vert
Indicador de carga verde
Magnetic charging port
Port de charge magnétique
Puerto de carga magnético
Customizable sizing
Taille ajustable
Talla ajustable
Two USB charging adapters
Deux adaptateurs de chargement USB
Dos adaptadores de carga USB
Spacer ring
Bague d’espacement
Anillo espaciador

CHARGING YOUR RING

Plug into a USB port to charge.
Slide USB charging adapter onto the ring. It will connect to the charging port magnetically.
A flashing green light indicates your device is charging.
A solid green light indicates your device is fully charged.

A full charge will take up to 2 hours. Ring must be fully charged before initial activation.

NOTE: If attempting to charge CIRCUL+ after several days of no use, green charging light may not start for 20 minutes.

DOWNLOAD APP & REGISTER

Make sure your mobile device is connected to the internet. Go to the iOS App Store or Google Play Store and search for CIRCUL+ to download and install.
Register your account with your email and password.

BLUETOOTH ACTIVATION

On a mobile device, turn ON Bluetooth and open the CIRCUL+ app. *Android 6.0+ can only use Bluetooth when GPS is enabled.

REGISTERING + PAIRING

Shake the ring to complete the pairing
Secouez l’anneau pour terminer le couplage
Agita el anillo para completar el empareja-miento.
Click ‘Add CIRCUL+’ button to pair your ring. Keeping the ring close to your mobile device, follow the instructions in your app to complete the pairing process.

RING POSITIONING

To begin monitoring, slide your finger into the CIRCUL+ with the raised part of the ring facing away from your body. Fit the CIRCUL+ onto any ﬁnger so that the ring is comfortable, but not easy to rotate (i.e. not too loose).

SPACER RING

If your CIRCUL+ ring does not remain snug in position on your finger, use the ‘Spacer Ring’ as pictured.
This will keep the CIRCUL+ ring in position and will ensure your ‘Sleep’ recording is the most accurate.

ACTIVATE MONITORING

When you open the CIRCUL+ app, you will see your blood oxygenation and pulse rate. To turn on monitoring, click the ‘Daytime’,’Exercise’ or ‘Sleep’ button on the home page.
Daytime mode: (Continuous Recording of Your Saturation and Heart rate) Requires a minimum of 2 minutes; records for up to 12 hours. Minimize hand movement during recording.
Exercise mode: (Continuous Recording of Your Heart Rate) Requires a minimum of 10 minutes; records for up to 12 hours.
Sleep mode: (Continuous Recording of Your Saturation, Heart Rate & Finger Temperature) Requires a minimum of 30 minutes; records for up to 12 hours. Please note, in order to record your sleep stages, Sleep mode must be active for at least 4 hours. Shorter periods will only record data for SpO2 and Heart Rate.
NOTE: You can shut your phone off or close CIRCUL+ mobile app during recording unless you are using the ‘Alert’ function.

END MONITORING

When you’ve completed ‘Daytime’,’Exercise’ or ‘Sleep’ monitoring, hold down the ‘Stop’ button in the app. The app will begin downloading data from your ring. Make sure to keep the ring close to your mobile device until the download process is complete and a report shows on your screen.
PERFORMANCE PARAMETER

Sp02

| Sampling Rate| 100Hz (data stored once a sec)
Range| 50% – 100%
Accuracy| 3% (between 70% – 100%)

Resting Heart Rate

| Sampling Rate| 100Hz (data stored once a sec)
Range| 30bpm – 240bpm
Accuracy| 2%, 2bpm, with maximum value
HARDWARE SPECIFICATIONS

Materials| 316L Stainless Steel, PC
Surface Treatment| PVD Coating
Waterproof Level| IPX2

Sensors

| 6 – axis Accelerometer

3-Wavelength Photo-Electric sensor

WARNING

Do NOT use information from the device as the sole basis clinical diagnosis and treatment.
Do NOT use this device around ﬂammable substances, such as anesthetics.
Do NOT use this in or around MRI or CT equipment.
Do NOT sterilize device at high temperature or under pressure.
Do NOT operate device around equipment that may generate strong electric and magnetic ﬁelds.
It is recommended to charge your battery at least twice a month to preserve the life of the battery.
Swallowing hazard. Please keep away from children under the age of 5 to avoid the risk of accidental ingestion.
Clean ring with soft cloth or cotton swab and rubbing alcohol only.

PREVENTION+ BODIMETRICS

PREVENTION is your leading provider of trustworthy health information, empowering its readers with practical strategies to improve their physical, mental, and emotional well-being.
BODIMETRICS is dedicated to empowering consumers with products, services and solutions that will allow them to take charge of their health care, lower overall cost, and improve their well-being.