LA BOITE CONCEPT PR LINK Walnut Speaker User Manual

LA BOITE CONCEPT PR LINK Walnut Speaker

Specifications

• Power Input: AC 100-240V ~ 50-60Hz, 120W
• Speaker Power: Total 240W
• Dimensions: L: 360mm, H: 160mm, P: 250mm
• Weight: 6 kg

Product Information

The PR LINK speaker is a high-power audio system with multiple connectivity options including Bluetooth, Wi-Fi, RCA, Optical, and USB inputs. It features a total power output of 240W and comes with various control buttons and indicators for ease of use.

Product Usage Instructions

Connection Options

• Jack Auxiliary Connection: Use a 3.5mm jack cable to connect external devices.
• RCA Connection: Connect devices using RCA cables.
• Optical Connection: Utilize the optical input for high-quality audio transmission.
• ARC Connection: Connect compatible devices using the ARC input.
• USB Charging: Charge devices through the USB-A and USB-C ports.

Wi-Fi Multiroom Connection
For Wi-Fi multiroom connection with the Streamer Escape X from La Boite Concept, refer to the manual for detailed setup instructions.

FAQ
What should I do if there is no power?
If there is no power, ensure that the power cord is properly connected to a working power source.

YOUR PR LINK SPEAKER

BOX CONTENTS

• IEC C7 power cords connector
• Audio cord RCA to jack auxiliar 3.5mm
• Quick start
• PR LINK speaker

SAFETY INFORMATION

1. Read these instructions.
2. Keep these instructions.
3. Heed all warnings.
4. Follow all instructions.
5. Do not use this apparatus near water.
6. Clean only with a dry cloth.
7. Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions.
8. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat.
9. Respect the safety principal of the biased plug or an earth type plug. A biased plug is equipped with two pins, one larger than the other. An earth type plug has two pins and a third of the earth type. The large pin or the third pin are provided for your safety. If the provided pin is not adapted to your electrical wall power socket, call an electrician to replace the obsolete electrical wall power socket.
10. Protect the power-supply cord from being stepped on or pinched, particularly at plugs, convenience receptacles and the point where they exit from the apparatus.
11. Only use attachments / accessories specified by the manufacturer.
12. Unplug this apparatus during lightning storms or when unused for long period of time.
13. Have all maintenance work done by qualified, specialized personnel. Repairs are required when the device has been damaged : power cord or plug damaged; liquid spilled on the device or if an object has fallen on it; if it rains on the device or if it is wet or damp; if the device not normally operating ; or is the device has fallen.

• ATTENTION
  The purpose of the exclamation point in equilateral triangle is to inform the user of the presence of important instructions in this manual about how to operate the device and maintenance operations.

• DANGEROUS VOLTAGE
  The luminous indicator with the “arch in an equilateral triangle” symbol is intended to warn the user of the presence of a “dangerous current” not insulated in the product, and this current could be strong enough to cause an electric discharge on people.

• DEEE SYMBOL
  The separate recycling of electrical and electronic devices. This product contains electrical and electronic equipments which can be reused, recycled or recovered, and therefore must not be discarded in your usual trash, which is not selectively sorted. Please return the unit or contact the authorized dealer who supplied you the product for more information.

• CE MARK
  This product in conformed to the European directives related to low voltage (2006/95/EC) and electromagnetic compatibility (89/336/EEC) when the unit is installed and used accordingly to the users manual instructions. To guarantee extended conformity, only La Boite Concept accessories should be used with this product and the maintenance operations must be conferred to qualified and specialized personnel.

• NORMES FCC
  The PR LINK speaker in an acoustic speaker which integrates a power amplifier.

WARNINGS

• To reduce the risk of fire or electrical discharge, do not expose the unit to rain or wet sources. The unit is class 1 classified, and it must be connected to the electrical wall power socket with an earth plug. The unit must be installed so that it can be removed from the electrical network by means of the earth plug (or with an adapted connector located on the rear side of the unit). If the power plug is used as a disconnection device, the unit must be available and easy to use. Only use the power cords supplied with the unit. We recommend not to place in a confined space. Do not place the unit on a rug, or on a smooth surface, and do not obstruct the air holes, the amplifier’s radiator (blades), or the output screens.
• The unit must not be used nearby water ; it must not be exposed to an evacuation source, or to splashing, or to any other types of liquids. No object filled with water such as vases, should be placed on the unit.
• WARNING DISCLAIMER The PR LINK set up is a very important step for the correct use of the product. The end user should carefully read the assembly guidelines before setting up the product or consult a brand representative in case of any question. CCLAB La Boite concept and its distributors cannot be held responsible in case of the product falling due to a mounting that did not follow these guidelines.
• IMPORTANT : THE MANUFACTURER DISCLAIMS ANY RESPONSIBILITIES FOR RADIO OR AUDIOVISUAL INTERFERENCES GENERATED BY UNAUTHORISED CHANGES MADE ON THIS DEVICE.
• SUCH CHANGES COULD WOULD VOID THE MANUFACTURER WARRANT AND CANCEL THE AUTHORIZATION OF UTILIZATION BY THE USER.
• This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation.
• This equipment was created and tested in conformity with the limits of class B digital devices in accordance to FCC rules. These limits were defined to provide a reasonable protection against dangerous interferences inside a residential installation. The equipment generates, uses and may emits radio frequency radiation if it is not installed or used in conformity with the instructions, and this may cause dangerous interference for radio communications.
• However, it is impossible to guarantee that no interferences will appear in a specific installation. If this device generates interferences which disturbs the reception of radio or television emissions, which may be noted by activating or deactivating the device, we propose to the user to try to remedy such interferences in one of the following ways :
  • Reorient or move the reception antenna ;
  • Increase the distance between the equipment and the radio television set ;
  • Connect the device to a wall power socket of another circuit than that one used for the radio or the TV ;
  • Contact the dealer or an experienced TV/radio technician for assistance.

The equipments recommended by La Boite concept complies with FCC exposure guidelines and are approved as part of an uncontrolled environment. These equipments have been designed so that are installed and used from a minimum distance of 20 cm between the transmitter equipment and the user(s).

FCC CAUTION

Any changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

• AERATION / IMPORTANT
  The unit may heat when used. Never operate the central part without its side bases. Do not place the equipment in a completely closed room or in a compartment insufficiently ventilated. Make sure that no small object can pass through the PR LINK. If it happens, immediately switch off the device, disconnect it from the wall power socket and contact your dealer for assistance and advice.

• LOCATION
  Carefully select a spot for installing your equipment. Avoid placing it directly in sunlight or nearby a heat source. No fire source such as candles shall be placed on the device. Also, avoid any source which could cause vibration, dust, coolness or moisture. The device can be used at average temperatures. The unit must be installed on the two (2) PR LINK provided legs.
  Do not operate the central part without its sides bases. Do not install the equipment in a completely closed room or in a set of compartments. Do not place the unit on an unstable surface or on a shelf. Make sure that the furniture inserts have been correctly fastened. If not, the unit could fall and injury a child or an adult, and damage the product as well. Due to the disturbed magnetic fields, no record player or CRT television set must be placed nearby the device to avoid possible interference.

• POWER SOURCE
  The unit should only be used with the type of electric power source compatible indicated in the trapdoor storage space. If you are not sure about the power source rating in your place, please contact your dealer or the company responsible for the electric power installation in your area. The unit was designed to be left in Stand-by mode when not in use ; this wall allow increasing the amplifier’s life (this is true for all electrical devices). To switch off the unit, press the ON/OFF button on the rear of the device (metal plate located under the central unit). If you do not intend to use the unit for a long period, simply unplug it from the wall power socket.

• OVERLOAD
  Avoid overloading the wall-mounted electrical installations or the extension cords because this could cause a fire or an electrical discharge. Overloaded DC installations, extension cords, damaged power cables, a damaged or cracked insulation and broken plugs are dangerous. They could cause a discharge or a fire. Make sure that each cables are correctly inserted. To avoid humming or background noise, do not mix interconnections with the power cord or loudspeakers cables.

• CLEANING
  In order to clean the unit, wipe it with a dry, lint-free cloth. Do not use liquid cleaning products containing alcohol, ammonia or abrasives. Do not use a spray on and nearby the unit.

• REPAIRS
  These units should not be repaired by the user. Do not try to repair, dismount or un-assemble the unit if a problem occurs. A strong electric discharge could take place if this precautionary measures are not respected. In case of a problem or failure, please contact your dealer.

LA BOITE CONCEPT  LIMITED WARRANTY

• This product was designed and manufactured in accordance with the most rigorous quality standards. However, in case of a problem, La Boite concept, and their national distributors, guarantee labour (exclusions possible) and spare parts free in all countries served by a La Boite concept approved distributor.
• This limited warranty is valid for a two years period from the date of purchase unless exclusions are applicable in some countries according to the national legislation. Contact La Boite concept’s distributor in your country for more information. Please make sure to subscribe to the warranty on La Boite concept website.
• Please make sure you register your PR LINK speaker on our website :  www.laboiteconcept.com/register
• Or use this QR code to access directly :

1. The warranty is limited to the repair of the equipment. Transport or other costs, and risks associated with the pickup, transport and installation of the products are not covered by this warranty.
2. The warranty is exclusively reserved for the original owner and may not be transferred.
3. During the 2-year limited warranty period, please preserve cartons boxes and protective foams.
   • This warranty is only eligible to products with faulty workmanship and/or defective parts at the moment of purchase and does not apply in the following cases:
   • Deteriorations resulting from an in correct installation, connection or packaging.
   • Deteriorations resulting from an usage other than the correct usage described in the User Manual, negligence, changes or the use of parts not manufactured or approved by La Boite concept.
   • Deteriorations resulting from defective or unsuitable auxiliary equipment.
   • Deteriorations resulting from : accidents, lightning, water, heat, war, breaches of public order, or other causes outside of the reasonable control La Boite concept or its approved distributors.
   • Products with serial numbers modified, erased, eliminated or rendered unreadable.
   • Products repaired or changed by an unauthorised person.
4. This warranty is an addition to any national / regional legal obligation on behalf of the national distributors or dealers and does not affect your statutory rights as a customer.
5. To claim this warranty please use the original packaging of your PR LINK.

HOW TO FILE A CLAIM UNDER THE WARRANTY

Please follow the procedure below if you desire to file a claim under the warranty :

1. If the equipment is used in the country where it was purchased, please contact the distributor approved by La Boite concept which sold the equipment.
2. If the equipment is used in a country other than the country where it was purchased, please contact the national La Boite concept distributor of the residence country, which indicates to you where you can have the equipment repaired. If you desire to file a claim from France, please contact La Boite concept in France at laboiteconcept.com to obtain an accurate telephone/email address of your local distributor. To validate, your warranty, you should present the original copy of your sales invoice or another form of proof of your purchase and the date of purchase.

PR LINK

GENERAL DESCRIPTION

QUICK START SET UP

You can take full advantage of PR LINK wherever you place the speaker in your room. Ideally, the unit should have a wall behind it (10-15 cm) into reflect the bass and get a better rendering. The audio system is designed to give you high-quality stereophonic listening and immersive sound, whether you’re sitting or standing close to the unit. As a result, the listener doesn’t need to be in a central position to enjoy optimal stereophonic sound, and multiple listeners can enjoy stereophonic sound diffusion simultaneously. Furthermore, it is not necessary to place the PR LINK symmetrically to the walls of the room.

TURNING THE POWER ON/OFF

1. Insert the power cord into the power cable plug located at the back of the PR LINK.
2. Connect the power cord to the wall socket.
3. To turn the PR LINK on, switch on the ON / OFF button on the back of the speaker. The Blue-tooth® LED will start blinking.
4. The PR LINK will automatically go into standby mode if you leave your device without a signal for 20 minutes. The standby LED will be red. To wake up the device, press the control button or play music from the last source used.
5. To turn the PR LINK in temporary «off» mode, press the control button until the LED turns off. Press the button again to restart it. The USB charging ports will not continue to operate while the PR LINK is in «off» mode.
6. To turn off the PR LINK completely, switch off the ON/OFF button on the back of your speaker. All LED lights and the USB charging port power supply go out.

CHOOSING YOUR SOURCE

1.  Press the control knob to select your source and / or to switch between connected sources.
2. A lit LED indicates the source you have selected. Connection order (from left to right): Bluetooth® AptX, Streamer Multi-Room, Auxiliary Jack 3.5mm, RCA, Optical, ARC.

SOURCE PANEL ACCESS

1. The top of the PR LINK has a magnetic trapdoor. Press the back of this (area shown in orange below) to release it.
2. Remove it to gain access to the source panel, featuring various connectors such as ARC, Optical, Auxiliary Jack 3.5mm, RCA, charging ports, streamer ESCAPE x LA BOITE CONCEPT.

USE

BLUETOOTH H® CONNECTION

Your PR LINK is equipped with Bluetooth® AptX: this technology enables you to send your music from your tablet or smartphone, cable-free, to your speaker. The PR LINK’s Bluetooth® receiver lets you listen to high-definition music wirelessly.
To use this connection, simply :

1. On your device, select PR LINK from the list.
2. Once the LED lights up steadily and you hear a continuous tone, you’re connected.
3. You can now enjoy your wireless listening and control your playlists from your source (tablet and smartphone) within a radius of around 20 meters of your PR LINK.

NOTE:
You only need to pair your tablet or smartphone once with your PR LINK, and the device is then included in the list of your Bluetooth® devices. When pairing a new device, press the button again and repeat the above steps. Your PR LINK can store up to 6 devices in its memory.

JACK AUXILIAR 3.5MM CONNECTION
Use the 3.5 mm jack auxiliary input to connect your PR LINK to audio sources such as your CD player.

1. Connect the audio cable to your PR LINK located on the source panel and to the audio output of your music device (source).
2. Use the source control knob to select the AUXILIAR input.

RCA CONNECTION
Use the RCA input using the cable supplied (the double-ended cable with RCA plug and 3.5mm jack audio device) to connect your PR LINK to audio sources such as your cell phone, tablet, computer or tablet.

1. Connect the supplied RCA audio cable to your PR LINK located at the source panel and to your source’s audio output.
2. Use the source control knob to select the RCA input.

OPTICAL CONNECTION
Use the optical input to connect your PR LINK to your TV, hard disk drive, streaming player, satel-lite or cable receiver. The optical input only works with PCM stereo. If a connected device sends 5.1 sound (or similar surround sound), the PR LINK will not work.

1. Connect the optical audio cable to your PR LINK located at the source panel and to the optical audio input of your source.
2. Use the source control knob to select the OPTICAL input.

ARC CONNECTION
Use the ARC input to connect your PR LINK to your TV. The ARC input is useful for controlling the volume of your PR LINK from the TV remote control.

1. Connect the ARC audio cable to your PR LINK located at the source panel and to the HDMI ARC audio input on your TV.
2. Use the source control knob to select the ARC input.

Note: To benefit from HDMI ARC technology, the devices to be connected must be compatible. Your TV must have an HDMI ARC output. HDMI connection allows you to connect your PR LINK indistinctly to your game console, DVD player and so on. With ARC functionality, your PR INK will automatically receive sound.

USB-A ET USB-C CHARGER

PR LINK features an integrated USB A port and USB C charging port. The charging ports will power all your USB peripherals. Switching the PR LINK off in «off» mode, or using the main switch and standby mode, will cut power to the socket.
The USB A and USB C charger is compatible with most USB devices at 5V power supply and can provide up to 2A for USB A and USB C charging current.
Note: Never use the charger with damaged cables, as these could overheat and cause a fire. Charging current for USB-A and USB-C devices is limited to 10W. This is sufficient to charge most smartphones and tablets. The charger is not compatible with the older iPod Classic (pre-2010) and other types of device that are not fully compatible with standard USB cables.

AUTO STANBY
Auto-standby occurs after 20 minutes with no audio signal (except via the STREAMER source).
Automatic wake-up is only possible via the last source used when the speaker has switched to automatic standby.

STREAMER ESCAPE X LA BOITE CONCEPT WI-FI MULTIROOM CONNECTION

1. Connect the adapter (1) to the male USB-C socket on the PR LINK source panel.
2. Connect the streamer (2) to the adapter’s optical jack and micro USB connector.
3.  The streamer is powered and a red LED is flashing. It’s ready to be configured.

Make sure that your phone or tablet is connected to the same Wifi network as the one you wish to use:

• Android: Open the Google Home application and select the ‘’+’’ symbol at the top left of the start screen.
  IOS: Go to Wifi settings on your iPhone or iPad and select ‘’Escpae M1 XXX’’ under ‘’Configure a new AirPlay speaker’’.

• Note: Please refer to the Escape streamer manual to learn more about how it works.

WHAT TO DO ?

• TO CLEAN YOUR PR LINK
  Before cleaning the device, unplug your PR LINK from the power socket. Clean the device only with a dry cloth. Do not use cleaning alcohol or solvents to clean the device’s surface because these could damage the painting and cause electrical failures or fire if they penetrate the device’s electronics.

• NO POWER
  Make sure that the IEC cable is solidly connected. Make sure that the plug is fully inserted in the power socket and there is power. Check that the master ON / OFF located underneath the loudspeaker is positioned on “ON”. Make sure that the PR LINK is not in standby mode. Make sure that the device is switched on by checking the Bluetooth® white LED on the top panel.

• NO SOUND
  Make sure that the volume is turned up to audible level and that the input source is at its maximum. Make sure that an available input source is selected. Make sure that the PR LINK is not in standby mode. Check if the bluetooth connection with your device is still active. Finally, if you still cannot hear any sound coming out of the PR LINK, increase the volume.

• THE SOUND IS DISTORTED OR BUZZES
  Check the connections of your music readers. Make sure that all the connecting cables are correctly plugged in, especially the earth/protection shield connections. Make sure that your cables are in good condition.

• BACKGROUND NOISE AND UNDESIRABLE INTERFERENCES
  Separate the device from other electrical appliances which may be causing the interference. If the above solutions do not remedy your problem, please contact a professional. Your home electrical installation may be connected to earth ground or it may be polluted by electrical parasites devices that implies audible noise. For any repairs during or after the warranty, please contact your dealer.

• THERMAL PROTECTION OF THE POWER AMPLIFIER
  In case of high level extended uses, a rising temperature can alter the performance of the amplifier. Above 110 degrees, the highest level allowed for safe optimal listening conditions must be lowered until the am-plifier cools down.

BLUETOOT H® ISSUES

• When connecting a new device make sure the PR LINK input source is switched to Bluetooth®. If the PR LINK does not show up on your device make sure to manually refresh the Bluetooth® device list on your phone / device after rapidly pressing the PR LINK Bluetooth button. There will be a short audio signal once your device makes connection. If you can’t hear any sound make sure the PR LINK is not in standby and turn up the volume.
  Your device may lose connection to the PR LINK when leaving the Bluetooth range or if in standby mode. In this case Bluetooth connection can easily be made again from your phone’s Bluetooth settings page ( without the need to press the Bluetooth button on the PR LINK).

• Note that depending on your installation and your mobile device the Bluetooth range will be limited to 5-10
  meters or less if walls or furniture obstruct the signal.

TECNICAL SUMMARY SOURCES

USB-C Wi-Fi Multi-room input for Streamer Escape AirPlay2®, Chromecast®, RoonReady® et Spotify Connect®

• Bluetooth® 5.1 AptX
• Auxiliaire jack 3.5mm input
• RCA input
• Optical input : optical digital audio input DAC Wolfsond 24 bits USB
• ARC input

USB CHARGERS

• 1 X USB A 5V – 2A
• 1 X USB C 5V – 2A

DIMENSIONS & WEIGHT

• L : 360mm, H : 160mm, P : 250mm
• Poids : 6 kg

LOUDSPEAKERS

• 4 exclusive CCLAB La Boite concept speakers :
• 1 x 4.5’’ Medium paper cone with very long excursion – neodymium magnetic load
• 1 x 4,5’’ Woofer paper cone with very long excursion – neodymium magnetic load
• 2 x 1.9’’ dome tweeter

POWER

• The four channels total 240W.
• 2 Class D amplification stages for midrange and woofer, with 110 watts of real hifi power at 4 ohms and
• 1% THD: 2 x 55W.
• 2 Class AB amplification stages for tweeter, with hifi power at 4 ohms and 1% THD of 30 real watts:
• 2 x 15W.

References

• La Boite concept - High-fidelity speaker manufacturer
• 극동음향 프리미엄몰
• La Boite concept - High-fidelity speaker manufacturer

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>