Flipo BT-MUSIC Wireless Multi-Use Headband User Manual

Flipo BT-MUSIC Wireless Multi-Use Headband

Product Information

This product is a device that complies with Part 15 of the FCC Rules. It is designed to operate without causing harmful interference and is capable of accepting any interference received, including interference that may cause undesired operation. The
device has been evaluated to meet general RF exposure requirements and can be used in portable exposure conditions without any restrictions.

Product Usage Instructions

1. Ensure that the device is in compliance with Part 15 of the FCC Rules.
2. Do not make any changes or modifications to the device that are not expressly approved by the party responsible for compliance. Unauthorized modifications may void the user’s authority to operate the equipment.
3. Follow all safety precautions and guidelines provided in the user manual.
4. Place the device in a suitable location where it can operate without causing interference to other devices.
5. Connect the necessary cables and power source to the device as instructed in the user manual.
6. Power on the device and wait for it to initialize.
7. Familiarize yourself with the device’s controls and features by referring to the user manual.
8. Use the device as intended, following the specific instructions for its particular function or application.
9. Monitor the device for any unusual behavior or signs of interference.
10. If any issues or concerns arise, refer to the troubleshooting section of the user manual or contact customer support for assistance.

By following these usage instructions, you can effectively and safely utilize the device in accordance with its intended purpose.

CAUTION

• DO NOT expose the product to liquids or moisture.
• DO NOT disassemble or open the product.
• DO NOT store the product near acid or alkaline material or liquids. Keep product away from fire and sources of extreme heat.
  NOTE: Be sure to charge headband at least once every three months.

FEATURES

Built-In microphone and wireless speakers. Rechargeable through universal USB- cable.

SPECIFICATIONS

• Wireless Version: V5.2
• Frequency: 2.402GHz-2.480GHz
• Transmission Range: 33ft
• Rated Power: RMS lOmW x 2
• Battery: 3. 7V 200 mAh Li-Poly
• Play Time: Approx. 12 Hours
• Charge Time: 2 Hours

FCC INFORMATION

This device complies with part 15 of the FCC Rule. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may caused undesired operation.

30 DAYS LIMITED WARRANTY
FLIPO GROUP warrants to the original purchaser, when used in North America only, that this product shall be free of defects in material and workmanship. This warranty applies within 30 days of the original purchase with normal home use. This warranty does not apply for commercial use of this product. Use outside of North America is not covered by this warranty. During the warranty period, we will at our option, repair or replace this product without charge, which shall be the consumer’ s sole remedy. ALL RETURNS must be accompanied by a Return Authorization Number, which is issued by the Customer Service Department of Flipo Group. Please contact Customer Service BEFORE returning any item. Once you have obtained a Return Authorization Number, the product must be returned with a clear copy of the proof of purchase, showing place and date of purchase, postage and insurance prepaid to:

Flipo Group
613 First Street
La Salle, IL61301
This warranty does not cover installation, adjustments in the home, nor damage due to accidents, misuse, abuse, fire or other acts of God, incorrect line voltage, damage to other equipment caused by improper installation, unauthorized or improper modification. This warranty gives you specific legal rights and you may also have other rights that vary from state to state.

Control Buttons

CARE – use a damp cloth to spot clean as needed. DO NOT get the ares around electronic damp or wet.

Turning On/Off

Pairing with your device

1. Turn on Bluetooth
2. Turn on the wireless headband
3. Connect to “BT-MUSIC” on your device

Charging

Plug the USB cable into a USB charging port or laptop. It will take about 1 hour to fully charge.

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

•  Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

Warning: changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment
The devices has been evaluated to meet general RF exposure requirement， the device can be used in portable exposure condition without restriction

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>