LG 98UM5J-B Digital Signage (MONITOR SIGNAGE) Owner’s Manual
- June 5, 2024
- LG
Table of Contents
OWNER’S MANUAL
LG Digital Signage
(MONITOR SIGNAGE)
Please read this manual carefully before operating your set and retain it for future reference.
98UM5J-B
110UM5J-B
www.lg.com
Copyright © 2021 LG Electronics Inc. All Rights Reserved.
WARNING – This equipment is compliant with Class A of CISPR 32. In a residential environment this equipment may cause radio interference.
BASIC
Note
- The accessories provided with your product may vary depending on the model or region.
- Product specifications or contents in this manual may be changed without prior notice due to upgrade of product functions.
Checking the Accessories
Depending on country
Learning the Buttons
The illustrations may differ depending on the model.
98UM5J-B
110UM5J-B
- : Opens the main menu or saves the input selection and exits the menu.
- : HDMI port
: Adjusts up and down.- : Moves left or right.
- : Turns the power on and off.
GETTING READY
Kensington Lock Device
(This feature applies only to some models.)
The Kensington lock device connector is located on the back of the monitor.
For more information on installation and use, refer to the user manual
provided with the locking device.
Connect the Kensington security system cable between the monitor and a table.
Note
- The Kensington lock device is an optional specification.
- This is a general illustration of installation and may look different from the product held by the customer.
CHECKING BEFORE INSTALLATION
We are not responsible for product damage caused by failure to follow the guide.
Installation Orientation
Using Vertically
(98UM5J-B Only)
When installing vertically, rotate the monitor 90 degrees clockwise while
facing the front of the screen.
Tilt Angle
Ceiling, Floor Orientation
Installation Location
We are not responsible for product damage caused by failure to follow the guide.
Indoor
Installing on a Wall
A: 40
mm or more
- The warranty will not cover any damage caused by using the product in direct sunlight on the front panel.
Installing on a Recessed Wall
A: 40 mm
or more
B: 50 mm or more
C: 100 mm or more
- The warranty will not cover any damage caused by using the product in direct sunlight on the front panel.
Outdoor
Outdoor Enclosed
Wall Mount Holder
To install the monitor on a wall, attach a wall mount holder (optional) to the
back of the monitor.
Take caution, and ensure that the wall mount holder (optional) is securely
fixed to the monitor and to the wall. The Wall Bracket dimensions of the wall
mount by model are as follows.
98UM5J-B 110UM5J-B
Model
| Wall Bracket Dimensions (A x B1)
(mm)| Standard Dimensions| Length (Maximum)
(mm)|
Quantity
---|---|---|---|---
98UM5J-B
|
800 x 400
|
M8
| 20|
6
Wall Bracket Dimensions (A x B2)
(mm)
800 x 800
Model
| Wall Bracket Dimensions (C x D)
(mm)| Standard Dimensions| Length (Maximum)
(mm)| Quantity
110UM5J-B| 1500 x 600| M8| 30|
4
Caution
- Disconnect the power cord first, and then move or install the monitor. Otherwise, it may result in electric shock.
- If the monitor is installed on a ceiling or inclined wall, it may fall and result in injury.
- Damage to the monitor by tightening the screws too tightly may void your warranty.
- Use screws and wall mount plates conforming to Wall Mount standards. Breakage or personal injury due to use or misuse of inappropriate components is not covered by the warranty of this product.
Note
- Using screws longer than the indicated depth may damage the inside of the product. Be sure to use the proper length.
- For more information on installation, please refer to the user manual for the wall mount.
PRECAUTIONS FOR USE
Dust
The warranty will not cover any damage caused by using the product in an excessively dusty environment.
Afterimage
-
After-image appears when the product is turned off.
– Pixels may be damaged rapidly if a still image is displayed on the screen for a long period of time. Use the screensaver function.
– Switching from a screen with high differences in luminance (black and white or grey) to a darker screen may cause an afterimage. This is normal due to the display characteristics of this product. -
When the LCD screen is in a still pattern for extended periods of use, a slight voltage difference may occur between the electrodes that operate the liquid crystal (LC). The voltage difference between the electrodes increases over time and tends to keep the liquid crystal aligned in one direction. At this time, the previous image remains, which is called an afterimage.
-
Afterimages do not occur when continuously changing images are used but take place when a certain screen is fixed for a long time. The following are operational recommendations for reducing the occurrence of afterimages when using a fixed screen. The maximum recommended time for switching the screen is 12 hours. Shorter cycles are better for preventing afterimages.
-
Recommended Usage Condition
1 Change the background colour and text colour at equal intervals.
– Afterimages occur less when the colours to be changed are complementary to
one another.
- ITO or MoTi Pixel Layer
2 Switch the screen at equal time intervals.
– Take caution, and ensure that text or images from before the screen change
are not left in the same location after the screen change.
PRODUCT SPECIFICATIONS
Without prior notice, all product information and specifications contained in this manual are subject to change to improve the performance of the product.
98UM5J-B
Input/Output Ports| NETWORK, HEADPHONE, USB IN, SPDIF, HDMI IN 1, HDMI IN 2,
HDMI IN 3
Resolution| Recommended Resolution| 3840 x 2160 @ 60 Hz (HDMI1, HDMI2, HDMI3)
Max Resolution
Power Voltage| 100-240 V ~ 50/60 Hz 6.0 A
Environmental Conditions| Operating Temperature
Operating Humidity| 0 °C to 40 °C
10 % to 80 % (Condition for preventing condensation)
Storage Temperature
Storage Humidity| -20 °C to 60°C
5 % to 85 % (Condition for preventing condensation)
- Product box packaging storage conditions
Power Consumption| On Mode| 540 W (Typ.)
Sleep Mode / Standby Mode| ≤ 0.5 W
110UM5J-B
Input/Output Ports| NETWORK, HEADPHONE, USB IN, SPDIF, HDMI IN 1, HDMI IN 2,
HDMI IN 3
Resolution| Recommended Resolution| 3840 x 2160 @ 60 Hz (HDMI1, HDMI2, HDMI3)
Max Resolution
Power Voltage| 100-240 V ~ 50/60 Hz 6.5 A
Environmental Conditions| Operating Temperature
Operating Humidity| 0 °C to 40 °C
10 % to 80 % (Condition for preventing condensation)
Storage Temperature
Storage Humidity| -20 °C to 60°C
5 % to 85 % (Condition for preventing condensation)
- Product box packaging storage conditions
Power Consumption| On Mode| 540 W (Typ.)
Sleep Mode / Standby Mode| ≤ 0.5 W
Model Name
| Size (Width x Height x Thickness) (mm)|
Weight (kg)
---|---|---
98UM5J-B
| 2198 x 1253 x 79.5|
78
110UM5J-B
| 2474 x 1408 x 99|
80
HDMI (PC) Support Mode
Resolution
| Horizontal Frequency (kHz)| Vertical Frequency (Hz)|
Note
---|---|---|---
800 x 600
| 37.879| 60.317|
1024 x 768| 48.363|
60
|
1280 x 720
| 44.772| 59.855|
1280 x 1024| 63.981|
60.02
|
1920 x 1080
| 67.5| 60|
3840 x 2160| 67.5 / 135|
30 / 60
|
HDMI (DTV) Support Mode
Resolution
| Horizontal Frequency (kHz)| Vertical Frequency (Hz)|
Note
---|---|---|---
480/60p
| 31.5| 60|
576/50p| 31.25| 50|
720/50p
| 37.5| 50|
720/60p| 45| 60|
1080/50i
| 28.1| 50|
1080/60i| 33.75| 60|
1080/50p
| 56.25| 50|
1080/60p| 67.432| 59.94|
1080/60p
| 67.5| 60|
2160/30p| 67.5| 30|
2160/50p
| 112.5| 50|
2160/60p| 135| 60|
Wireless module (WCT2GM2511) Specifications
Wireless LAN (IEEE 802.11a/b/g/n/ac)
Frequency range (MHz)|
Output power (Max.) (dBm)
2400 to 2483.5
5150 to 5725
5725 to 5850
| 17
17
14
Bluetooth
Frequency range (MHz)
| Output power (Max.) (dBm)
2400 to 2483.5|
7
- As band channels can vary per country, the user cannot change or adjust the operating frequency. This product is configured for the regional frequency table.
- For consideration of the user, this device should be installed and operated with a minimum distance of 20 cm between the device and the body.
(Only Nigeria)
Connection and use of this communications equipment is permitted by the Nigerian Communications Commission
LICENCE
Supported licenses may differ by model. For more information of the licenses, visit www.lg.com.
The terms HDMI, HDMI High-Definition Multimedia Interface, and the HDMI Logo are trademarks or registered trademarks of HDMI Licensing Administrator, Inc.
The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such marks by LG Electronics Inc. is under license. Other trademarks and trade names are those of their respective owners.
The model and serial number of the product are located on the back and on one side of the product. Record them below in case you ever need service.
MODEL____
SERIAL NO._____
Temporary noise is normal when powering ON or OFF this device.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>