Rolling Center BL 2000 Digital Lock User Guide
- June 5, 2024
- Rolling Center
Table of Contents
BL 2000 Digital Lock
User Guide
Remove the lock from the door.
Turn the keypad over and remove the red retaining screws securing the
rectangular cover plate to the coding chamber. Take extra care to keep the
keypad on a flat surface when removing the cover plate as this has several
springs attached.
You will now see that there are between 4 and 5 red colored coded tumblers and
the rest are blue un-coded tumblers plus 1 clear tumbler (C button).
To change your code push the C button and hold it down. You can then easily
remove one or more of your coded and un-coded tumblers using the tweezers
supplied.
Please note you should never remove the C tumbler or take your finger off the
C button when changing your code.
Please note the different shapes of tumblers before reinserting them into the
lock body.
First there is a difference in shape between the coded and un-coded tumblers
as illustrated below. Secondly when refitting the tumblers into the lock body
they must be fitted facing the correct way again see the illustration below
all square cut outs must face outwards.
Once inserted correctly the dimple on the tumbler will sit in the cut-out on
the coding chamber.
After you have refitted the tumblers and have made a note of the new code
please replace the metal plate with the red screws.
Please note-with the spare tumblers provided you can either increase the
number of digits in your code to 6-7 or reduce to 3-4.
Please call our helpline for spares, repairs and technical advice – 01132016677
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>