Rabbit Air SPA-1000N MinusA3 Air Purifier User Guide
- June 5, 2024
- Rabbit Air
Table of Contents
Rabbit Air SPA-1000N MinusA3 Air Purifier
Removing the Filter Case
- Hold the top of the front panel and pull towards you to remove the cover.
- Push down on the middle tabs located on the top and bottom of the Filter Case and then pull towards you to release the Filter Case.
- Once you have removed the Filter Case, lay it on a flat surface.
- Remove the Pre-Filter by pinching the two tabs on the top left and right side of the frame.
Installing Your New Filters
- Unwrap all of your new replacement filters.
- Insert the new filters into the Filter-Case. Make sure to identify the orientation and direction for each filter
- With the new filters inside the case, place the Pre-Filter in last, making sure all the filters are packed snugly.
- Insert the Filter Case with all the new filters back into the MinusA3.
Customized Filter
Ensure that the filter label faces outwards and is located on the top. The top
right corner is different from the other 3 corners and should be aligned
accordingly.
BioGS HEPA Filter
Activated Carbon Filter
Medium Filter
Make sure the edge of the medium filter lines up and sticks to the velcro on
the Activated Carbon Filter.
Need some help?
Visit us at www.rabbitair.com or call us at
888.866.8862 24/7 Customer Care
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>