Roccat KULO 7.1 USB User Manual and Driver
- June 5, 2024
- ROCCAT
Table of Contents
KULO 7.1 USB Headset
QUICK INSTALLATION GUIDE
CONGRATULATIONS
You are now the proud owner of a ROCCAT™ Kulo, an exceptional virtual 7.1
headset that combines low weight, maximum comfort and stunning sound. Extra
soft earcup and headband padding, made from skin-friendly materials, permits
hours of tireless gaming. What’s more, the long cable, which is routed to one
side, makes the headset even more of a pleasure to wear.
SPECIFICATIONS
PACKAGE CONTAINS
- ROCCAT™ Kulo – Virtual 7.1 Gaming Headset
- ROCCAT™ Kulo – Virtual 7.1 USB Sound Card
- ROCCAT ID Card
- Quick Install Guide
SYSTEM REQUIREMENTS
- Windows® XP 32 bit/Vista® 32/64 bit, Windows® 7 32/64 bit
- Internet connection (for driver download)
- USB 2.0 port
TECH SPECS: HEADSET
- Frequency response: 20~20.000Hz
- Impedance: 50Ω ± 15%
- Sensitivity at 1KHz: 102dB ± 3dB
- Max. output: 80mW
- Driver diameter: 40mm
- Driver magnets: Neodymium
- Driver membrane: Mylar®
- Weight: 178g w/o cable
- Connection: 2 x 3.5mm
- Cable length: 2.5m
TECH SPECS: MICROPHONE
- Frequency response: 50~18.000Hz
- Sensitivity: -40 ± 3dB 50dB
- Signal-to-noise ratio: 2.2KΩ
- Impedance: Omni-directional
- Directivity: Noise canceling
- Type:
TECH SPECS: SOUND CARD (STEREO, 7.1) VIRTUAL
- Sampling rate: 48K/44.1KHz
- Connection: USB 2.0
- Jacks: 2 x 3.5mm
1. SOUND CARD CONNECTION
2. CONNECTING TO COMPUTER (USB)
3. VOLUME CONTROL
4. HEIGHT ADJUSTMENT
5. AUTOMATIC MIC-MUTE
Please note
To experience virtual 7.1 surround sound please download the latest driver at
www.roccat.org.
Radio interference
Operation of the device (the devices) may be affected by strong static, electrical or high-frequency fields (radio installations, mobile telephones, microwave discharges). If this occurs, try increasing the distance between the devices that are causing interference.
Damage to hearing
High volume levels may cause damage to hearing. Avoid lis-tening to audio at
too high a volume, especially for extended periods, and check the volume level
that has been set on the volume control each time before the product is used.
EARPAD REPLACEMENT
1. PLACE EARPAD ON SPEAKER
2. TWIST & LOCK INTO PLACE
3. ENJOY!
Should you need assistance …
Our support team will help you with any technical problems – just send us an
email ([email protected]) or visit our website:
WWW.ROCCAT.ORG/SUPPORT
ROCCAT GmbH
Otto von Bahrenpark
Gasstrasse 6b, Building N
22761 Hamburg, Germany
Join us ON FB :
© 2011 ROCCAT GmbH. All rights reserved. Any product names mentioned in this manual may be trademarks or registered trademarks and are the property of their respective owners. Information contained herein is subject to change without notice. ROCCAT GmbH shall not be made liable for any errors that may appear in this manual. This publication or parts of it may not be reproduced without the express consent of the publisher.
Please Note: To experience virtual 7.1 surround sound please download the latest driver at www.roccat.org
Operating systems:
Windows® 10 64 Bit
Windows® 10 32 Bit
Windows® 8 64 Bit
Windows® 8 32 Bit
Windows® 7 64 Bit
Windows® 7 32 Bit
Windows® Vista 64 Bit
Windows® Vista 32 Bit
Windows® XP 32 Bit
DOWNLOAD
Roccat KULO 7.1 USB User Manual – [ Download PDF ]
Roccat KULO 7.1 USB Driver – [ Download Driver ]