CREABEST VB005 LiFePO4 Battery 120Ah Instruction Manual

CREABEST VB005 LiFePO4 Battery 120Ah

Product description

General information
In order to achieve stable power supply even under heavy loads, lithium batteries are definitely the best alternative to lead-acid batteries. In addition to the extremely high weight advantage, it also has a huge energy reserve, providing greater flexibility for battery connections. Creabest’s LiFePo4 battery’s built-in smart battery management system (BMS) not only protects the batteryfrom various abnormal conditions, but also monitors the charging/discharging process. The battery ensures a long service life and excellent discharge capacity. Compared with lead, gel or AGM batteries, it can withstand large currents, can be versatile and light in weight. In addition, the latest lithium iron technology provides a high degree of intrinsic safety, so there is no danger of explosion even under the most extreme conditions. Lithium iron phosphate batteries are the safest among conventional lithium battery types. Thenominal voltage of the lithium iron phosphate battery is 3.2V. Therefore, a 12.8V LiFePO4 batteryconsists of four batteries connected in series.
Main features
Lithium iron phosphate batteries are the chemical choice for a series of very demanding applications. Some of its functions are:

• Battery Management System (BMS) provides comprehensive protection for the battery and intelligently manages the charging/discharging process.
•  Long service life, generally up to 7-8 years.
•  High cycle life, even in the case of regular deep discharge, the cycle life is more than 3000times.
•  No memory effect
•  High energy density-larger capacity, smaller weight and volume.
•  High charging and discharging current-fast charging and discharging are possible.
•  Environmental protection, lead-free, acid-free. Applicable fields: RV and caravan/photovoltaic, solar and renewable energy systems/Fishing, electric boat motors/power banks, camping and recreational activities.

Battery Management System (BMS)
The battery management system monitors and controls each unit of the battery to ensure that the battery is turned off in the case of undervoltage or overload, and automatically restarts immediately after the problem is corrected to prevent the battery from being damaged. Important functions of the battery management system:

• Overload protection
  If an overload occurs, the BMS will turn off the battery output to protect the battery. The battery has no voltage at this time; when the condition returns to normal, the batteryautomatically returns to normal.

• Deep discharge protection
  Each cell inside the battery individually monitors the deep discharge. If this causes the batteryoutput to be turned off, the battery can only be turned on again by charging. Note: Even small consumers, such as alarm systems, relays, backup systems, etc. will consume capacity and discharge the battery. If you do not use the battery for a long time, pleasedisconnect all connections between the battery and the system.

• Overvoltage protection
  The total charging voltage of LIFEPO4 battery is 14.6V (the charging voltage of a single cell cannot exceed 3.65V/cell), otherwise the battery will be damaged due to overvoltage. Therefore, it is best to use a suitable charger with a final charging voltage of 14.4V-14.6V to charge the LiFePO4battery. Although BMS can protect the battery from being overcharged, it must absorb and burncurrent by itself. If the charging voltage exceeds 14.6V for a long time, it will damage the BMS!

• Active battery balancing
  The built-in active balancer can adjust the battery at any time to ensure that the internal small batteries (cells) have the same voltage and extend the battery life.

• Charging control
  BMS always monitors and controls all parameters of reliable and safe charging. If something goes wrong, you can prevent charging by turning off the battery output to protect the battery.

• Battery temperature protection
  When the battery temperature is too high/low, the BMS will turn off the battery. At this time, youmust first wait for the temperature to return to normal conditions, and then BMS enables theoutput again.

Safety guidelines and measures

General warning

•  Please read this manual before installing and using the manual.
•  The manufacturer is not responsible for damage caused by incorrect operation or improper use of the product.
•  The batteries cannot be used in series.
•  Do not short-circuit the positive and negative terminals of the battery pack.
•  Please check the routing circuit to ensure that the adapter and connector are correct.
•  Please keep the battery away from water, heat, sparks and harmful chemicals.
•  Do not immerse the bag in water or throw it away in the fire.
•  Do not place the package in high temperature or direct sunlight.
•  Do not pierce, drop, squeeze, burn, penetrate, shake or hit the battery.
•  Place the battery pack in a cool and dry place. If it is stored for more than three months, please charge it to 80% before use. The battery should be charged once every 3 months.
•  Do not disassemble or reassemble the battery pack.

Charge and discharge warning

• If the depth of LiFePO4 discharge is too large, it may cause damage and cause Please install safety relays or isolation switches to prevent silent consumers from deep discharge.
• If the lithium battery is damaged or overcharged, the lithium battery will release harmful gases, such as
• The temperature range that the battery can be charged is 0℃ to 55℃. Charging the battery at temperatures outside this range may severely damage the battery or shorten the battery life.
• The battery can discharge temperature range is -20℃ to 60℃. Discharging the battery at a temperature outside this range may severely damage the battery or shorten battery life.

Transportation warning

Lithium batteries must be transported in the original packaging or appropriate packaging. Do not lift the battery through the connection, but only through the handle. The battery was tested according to section 38.3 (ST/SG/AC.10/11/5th edition) of Part III of the”United Nations Test and Standards Manual”. In terms of transportation, the battery belongs to UN3480 category 9 type II packaging and must comply with relevant regulations. This means that it must be packed in accordance with packing instruction P903 for land or water transportation (ADR, RID and IMDG), and air transportation (IATA) in accordance with packinginstruction P965. The original packaging meets these requirements.

Disposal/recycling of batteries

• Batteries marked with a recycling mark must be disposed of through a recognized recycling agency.
• The battery must not be disposed of together with domestic or industrial
• LiFePO4 iron phosphate batteries are subject to disposal and recycling regulations, depending on the country and region.
• Do not throw the battery into the

Battery installation

Delivery content

Blue clamp and red clamp Manual： Inspection
After receiving the LiFePo4 battery, please check carefully whether the battery has beendamaged by any means (such as transportation). In this case, please do not put the battery intouse and contact the seller.

Battery parameters

14.6V

| ****

Dimensions

| ****

357x338x152mm

BMS low voltage protection| 8V| Net Weight| 26.7KG
Resistance| ≤15mΩ| Outside Dimensions| 450x450x255mm
Cell Type| LiFePO4| Gross Weight| 29KG

Preparation

Before installing and operating the battery, it is recommended to prepare the following equipment or tools:

• Correct protective equipment
• Isolation tool
• Multimeter
• AWG3/30mm2 or thicker wire (black and red)
• Suitable charger/charge controller/charging system
• Wire cutter
• M8 screwdriver
• Insulation tape

Battery connection
According to the distance between the inverter and battery pack, to prepare the length of the wire, and each terminal copper should be 11-14mm

Insert the black wire to blue clamp,red wire to red clamp,and fasten the screws tightly, see below:

•  Please fix the battery pack with glue or belt firmly,the distance between battery pack and inverter should be less than 75cm.
•  Make sure inverter is powered off and to lock the BLACK wire to the inverter’s NEGATIVE poletightly, and then lock the other terminal to battery’s NEGATIVE pole tightly too. Please useinsulating tape to protect exposed wire copper.
• •  Make sure inverter is powered off , and to lock the RED wire to the inverter’s POSITIVE pole tightly,and then lock the other terminal to the battery’s POSITIVE pole tightly too. Please useinsulating tape to protect exposed wire copper.
•  Do not short circuit when locking the wire to the battery poles. The clamps and term- inals must be connected firmly.

Installation location/condition
Although the weight of LiFePo4 batteries is lighter than that of lead-acid batteries (AGM, GEL, etc.), you must ensure that the batteries are properly fixed when installing and always useappropriate transportation equipment. If battery holders are already available and suitable, youcan continue to use them. Note: The battery can be placed vertically or lying down. Make sure that the LiFePO4 battery has been installed and fixed so that it will not move back andforth (tighten the belt) during use. Please handle the lithium battery carefully to avoid accidents

Battery care/maintenance

• Please perform a visual inspection
• Check the appearance of The top of the battery and connector terminals should be clean, dry and free of corrosion.
• Check the battery cables and connections. Replace damaged cables and tighten loose connections.
• Please clean the battery
• Disconnect the battery from the charging source or
• Use a damp cloth or non-metallic brush to clean the top and connections of the
• Wipe the battery dry with a clean cloth, and keep the battery area clean and
• Make sure that the battery is completely dry before reactivating and/or reconnecting it to a charging source or
• Please keep the terminals and plugs free from corrosion. Corrosion of terminals will affect battery performance and bring safety
• Please check the battery voltage regularly to evaluate the battery condition. Use it periodically at least once a year to maintain battery capacity and calibrate the state of charge.

Battery storage/overwintering

• Before long-term storage, please charge the battery to 60%-80% and store the battery pack in a cool and dry place.
• Disconnect the battery from the device to eliminate any parasitic loads that may discharge the
• Handle the battery carefully, do not pierce, drop, squeeze, burn, penetrate, shake or hit the
• Charge the battery at least once every 3 months to avoid over-discharge. It is recommended to charge the battery to approximately 60%-80% of its capacity
• Please keep the battery away from water, heat, sparks and harmful
• Do not immerse the bag in water or throw it away in the
• Do not place the package in high temperature or direct
• When leaving the factory, the battery has been charged to 90%. Due to the long transportation time, the voltage may be too It is recommended that you fully charge the battery before using it.
• Temperatures below -20°C will not damage the However, it is usually necessary to ensure that very cold batteries are slowly adapted to the ambient temperature. Rapid heating can cause condensation to form inside the case and damage the battery.

Service and support

Service

If you have any questions about the battery after purchase or during operation, please refer to the following instructions:

• If the battery voltage is too low to supply power to the load reliably, please charge the battery as soon as
• If the battery temperature is too high or too low, disconnect all connections and let the battery stand upright until it cools or warms to room
• If excessive current flows through the battery and causes battery failure, disconnect the load until the battery returns to
• If the battery fails due to a short circuit, please eliminate the short circuit immediately and the battery will resume normal
• If the battery is locked due to over-discharge, please use an external charger with lithium battery activation function to activate

You can also contact us by email for help, please explain the problem in detail or attach a picture when contacting. Tip: When contacting us directly, please have your order number or invoice number and product SKU ready.

Returns and refunds

If for any reason you are not satisfied with your purchase, you can return it.

• As long as the goods are complete and in an unused, undamaged and unmodified state, they will be returned within 30 days after receipt of the goods. If your product does not meet these requirements, we cannot guarantee that it will be refunded or exchanged. Returns outside of 30 days require special approval.
• Creabest waives the cost of restocking and pays shipping costs for goods returned for any of the following reasons: shipping damage, defective products, wrong products received or other products not ordered. For all other reasons, the customer is responsible for shipping costs.
• After receiving the returned product, you will receive a refund within 3-5 working
• Contact the Creabest service before returning the goods. If we do not notify us in advance, Creabest is not responsible for returned
• Please note that Creabest does not accept returns after modifications to the product, as this will invalidate our warranty policy. If we receive the modified product, it will be returned. The costs incurred are borne by
• • Order number and product code
    • A detailed description of the problem. It is strongly recommended that you provide a detailed picture description or a detailed video
    • After returning the goods, please inform us of the return flow information inWhat information do we need from you:

Guarantee and warranty

• Cheapest products are manufactured according to the most stringent quality standards, and creabest guarantees that LiFePO4 batteries can be delivered in perfect
• Cheapest provides a statutory warranty for defects in production and materials when the product is delivered, and the warranty period is 2
• Cheapest takes no responsibility for typical signs of
• Warranty does not apply to defects that can be traced back to natural wear, improper use or insufficient maintenance. Use this product at your own
• The warranty can only be confirmed when the product is returned with a copy of the purchase receipt or order information. In any case, the warranty does not exceed the value of the product.
• Activating the product means that you acknowledge the above conditions and assume full responsibility for the use of this
• The relevant weight, size or other values provided by Creabest should be understood as a guide. Creabest does not assume any formal obligations for such specific information, as technical changes for more efficient use of the product may result in different

References

• Batteria LiFePO4 per Camper, Solare, Barca, Fotovoltaico | CREABEST – creabest.it
• LiFePO4 Batterie/Akku für Wohnmobil Wohnwagen Camping RV Boot Caravan – CREABEST-DE
• LiFePO4 Batterie & Kit Panneau Solaire | Creabest Énergie – creabest.fr

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>