UVBrite TT-B02 Self-Cleaning Water Bottle User Guide
- June 5, 2024
- UVBrite
Table of Contents
- UVBrite TT-B02 Self-Cleaning Water Bottle
- Welcome to the future
- Getting Started
- Explanation of Functions
- Warranty
- DrinkBrite](#DrinkBrite%5D%28http%3A%2F%2Fpost%2520it%21%2520%40myUVBrite%2520%23DrinkBrite%29)
- References
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)
UVBrite TT-B02 Self-Cleaning Water Bottle
Welcome to the future
Congratulations on your purchase of a UVBrite water bottle. Pure and safe water from a clean bottle is now available at the press of a button wherever you are.
Key Features
- Eliminate up to 99.99% of all microbes
- Blitz mode for water that might require extra
- disinfection
- Child-proof
- Up to 50 disinfections from a single charge
- Vacuum sealed 304-grade stainless steel
Please Note
- A flashing green and magenta light indicate that disinfection has not taken place
- UV-C disinfection does not eliminate physical
Getting Started
-
Clean Thoroughly
Before first use, please ensure that you thoroughly clean the bottle and lid with warm soapy water before first use. -
Charge Before First Use
Use the included USB-C cable ta fully charge the lid before first use. It takes roughly 2.5 hours for a full charge. LED 4 will light up red while the battery is recharging. When charging is complete, the LED will turn off automatically. -
Normal Disinfection Mode
The normal disinfection mode can be used to ensure that water from most sources is disinfected. To activate the normal mode, press the button once. LED 1 will light up green, while LEDs 2, 3 and 4 will flash blue in a cycle. -
Blitz Disinfection Mode
If drinking water from a stream or from sources that require greater disinfection press the button twice to activate blitz mode. The blitz mode lasts for 5-minutes. LED 1 will light up magenta when in blitz mode, while LEDs 2, 3 and 4 will flash blue alternatively. -
Self Cleaning
The UVBrite bottle has an intelligent self-cleaning function, which switches on every 6-hours to ensure that the bottle is constantly disinfected. The LED will light up magenta when the bottle is in self-cleaning mode, while LEDs 2, 3 and 4 will flash blue alternatively. -
Cleaning Instructions
The UVBrite bottle and cap are designed only to be hand washed. Please do not wash them in a dishwasher.
Explanation of Functions
We are Here to Help
Have questions about your UVBrite battle? Visit us at www.uv-
brite.com/support for FAQs or contact our
customer support team at hello@uv-brite.com
Warranty
We want you to have complete peace of mind, which is why we offer a 1-year limited warranty on all of our products.
Join the Community
Share a photo of your UVBrite Bottle with us, and we’ll [post it! @myUVBrite
DrinkBrite](http://post%20it!%20@myUVBrite%20#DrinkBrite)
EPA Establishment Number:96991-CHN-1
- Based on testing against Escherichia coli,
- Staphylococcus aureus, Escherichia virus MS2,
- Influenza A H3N2, Human Adenovirus 5
- For further information, please visit uv-brite.com