Globe 91000432 4-Light Track Bar Installation Guide
- June 3, 2024
- globe
Table of Contents
Globe 91000432 4-Light Track Bar
Made in China
Cleaning & Maintenance
- Keep the product away from direct heat and sunlight
- Prolonged exposure to heat sources may cause glazing, melting and scorching, or even cause color to fade.
- Regular vacuuming or light brushing helps to remove dirt and prevent soil build-up, which increases the appearance wear
- Periodically (every 90 days) make sure that the screws are fully tightened
Lamp Care Instructions
- Carefully read through the instruction sheet before assembly and using the product.
- Caution there is a risk of shock. Disconnect from power source before assembling or cleaning.
- Switch off, unplug and allow bulb to cool before replacing bulb or cleaning.
- Use a soft clean dry cloth that will not scratch or smudge the surface when cleaning
- Only use the recommended bulb type and do not exceed the maximum wattage as it could cause fire.
Electrical Installation
- Place the wall switch to the “OFF” position. Depending on which type of fuse box you have in your home:
- Place either the main (Master) switch to the “OFF” position, cutting off power to your entire home ; OR turn off the individual switch that provides power to where the fixture will be installed.
- Place either the main (Master) switch to the “OFF” position, cutting off power to the entire home; OR unscrew the fuse that provides power to where the fixture will be installed.
CONSULT A QUALIFIED ELECTRICIAN TO ENSURE CORRECT BRANCH CIRCUIT CONDUCTOR.
Contents
Before getting started, ensure the package contains the following components
Assembly
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>