Hover-1 H1-REBEL Electric Scooter User Guide
- June 5, 2024
- HOVER-1
Table of Contents
H1-REBEL Electric
Scooter
User Guide
HELMETS SAVE LIVES!
Always wear a properly fitted helmet that complies with CPSC or CE safety
standards when you ride your scooter.
Correct Fitting:
Make sure your helmet covers your forehead. Incorrect Fitting:
The forehead is exposed and vulnerable to serious injury. WARNING!
PLEASE READ THE USER MANUAL THOROUGHLY.
Failure to follow the basic instructions and safety precautions listed in
the user manual can lead to damage to your Rebel, other property damage,
serious bodily injury, and even death.
Thank you for purchasing the Hover-1 Rebel Electric Scooter. Please read all
instructions carefully before using and retain this manual for future use and
reference.
This manual applies to the Rebel Electric Scooter.
- In order to avoid dangers that are caused by collisions falls, and loss of control, please learn how to ride the Rebel safely.
- You can learn operating skills by reading the product manual and watching videos.
- This manual includes all operating instructions and precautions, and users must read it carefully and follow the instructions.
- Hover-1 can not be held liable for damage or injury caused by failure to understand and follow the warnings and instructions in this manual.
ATTENTION
- Use only the supplied charger with this scooter. Charger Manufacturer: Shenzhen Hyleton Technology CO., LTD. Model: HLT-118A-2940400U
- The operating temperature range of the Rebel is 32-104° F (0-40° C).
- Do not ride on icy or slippery surfaces.
- Read the user manual and warning labels before riding.
- Store the Rebel in a dry, ventilated environment.
- When transporting the Rebel, avoid violent crashes or impacts.
LOW-TEMPERATURE WARNING
Low temperature will affect the lubrication of moving parts inside the Rebel
scooter, increasing internal resistance. At the same time, in low
temperatures, the discharge capacity and the capacity itself of the battery
will be significantly decreased.
Use caution when riding the Rebel in cold temperatures (below 40 degrees F).
Doing so may increase the risk of mechanical failures of the scooter, which
may lead to damage to your Rebel, other property damage, serious bodily
injury, and even death.
SAFETY INSTRUCTIONS
- Keep the Rebel away from heat sources, direct sunlight, humidity, water, and any other liquids.
- Do not operate the Rebel if it has been exposed to water, moisture, or any other liquids to prevent electric shock, explosion, and/or injury to yourself and damage to the Rebel.
- Do not use the Rebel if it has been dropped or damaged in any way.
- Repairs to electrical equipment should only be performed by the manufacturer. Improper repairs void the warranty and may place the user at serious risk.
- Do not puncture or harm the exterior surface of the product in any way.
- Keep the Rebel free from dust, lint, etc.
- Do not use this Rebel for anything other than its intended use or purpose. Doing so may damage the Rebel or lead to property damage, injury, or death.
- This product is not a toy. Keep out of reach of children.
- Do not expose batteries, battery packs, or batteries installed to excessive heat, such as direct sunlight, or open flame.
- Do not allow hands, feet, hair, body parts, clothing, or similar articles to come in contact with moving parts, wheels, or drivetrain, while the engine is running.
- Do not operate or allow others to operate the Rebel until the user understands all instructions, warnings, and safety features described in this manual.
- Check with your doctor if you have a medical condition that could affect your ability to use the Rebel.
- Persons with head, back, or neck ailments or prior surgeries to those areas of the body are not recommended to use the Rebel.
- Do not operate if you are pregnant, have a heart condition, or have both.
- Persons with any mental or physical conditions that may make them susceptible to injury or impair their physical or mental capabilities to recognize, understand and perform all of the safety instructions and to be able to assume the hazards inherent in unit use, should not use the Rebel.
NOTES:
In this manual, the above symbol with the word “NOTES” indicates
instructions or relevant facts the user should remember prior to using the
device.
CAUTION!
In this manual, the above symbol with the word “CAUTION” indicates a
hazardous situation that, if not avoided, can cause minor or moderate
injury.
WARNING!
In this manual, the above symbol with the word “WARNING” indicates a
hazardous situation that, if not avoided, can cause death or serious injury.
SERIAL NUMBER
Please keep the serial number on file for warranty claims as well as proof
of purchase.
AWARNING!
WARNING: Prolonged Exposure to UV Rays, Rain, and the Elements May
Damage the Enclosure Materials. Store Indoors When Not in Use.
INTRODUCTION
The Hover-1 Rebel is a personal transporter. Our technology and production
processes are developed with strict testing for each Rebel scooter. Operating
the Rebel without following the contents of this manual may lead to damage to
your Rebel or bodily injury.
This manual is designed to give you the information you need for the safe
operation and maintenance of your Rebel. Please read it thoroughly before
riding your Rebel.
PACKAGE CONTENTS
- Hover-1 Rebel Electric Scooter
- Wall Charger
- Operation Manual
FEATURES/PARTS
1. Fender | 5. Tire |
---|---|
2. Left Foot Mat | 6. Protective Chassis Casing |
3. Battery Indicator | 7. Charge Port (on back) |
4. Right Foot Mat | 8. Power Button (on back) |
OPERATING PRINCIPALS
The Rebel uses digital electronic gyroscopes and acceleration sensors to
control balance and motion, depending on the user’s center of gravity. The
Rebel also uses a control system to drive the motors that are located within
the wheels. The Rebel has a built-in inertia dynamic stabilization system that
can help assist with balance when moving forward and backward but not while
turning.
TIP – To increase your stability, you must shift your weight in order to
overcome the centrifugal force during turns, especially when entering a turn
at higher speeds.
WARNING
Any Rebel that does not work properly can cause you to be in control and
fall. Inspect the entire Rebel thoroughly before every ride, and do not ride
it until any problems have been corrected.
SPECIFICATIONS
Model: | Hover-Pm Rebel (H 1 -REBL) |
---|---|
Net Weight: | 13.23 lbs (6 kg) |
Load: | 44-130 lbs (20-60 kg) |
Max Speed: | Up to 6 mph (9.7 km/h) |
Max Distance Range: | Up to 3 miles (4.8 km) 5° |
Max Incline Angle: | 0° |
Minimum Turning Radius: | Up to 7 hours |
Charge Time: Battery Type: | Lithium-ion |
Battery Voltage: | 25.2 V |
Battery Capacity: | 2.0Ah |
Power Requirement: | AC 100-240V, 50/60Hz |
Ground Clearance: | 1.2 inches (3.05 cm) |
Platform Height: | 4.5 inches (11.43 cm) |
Tire Type: | Non-Pneumatic Solid fires |
CONTROLS AND DISPLAY
PLEASE READ THE FOLLOWING INSTRUCTIONS CAREFULLY
TURNING YOUR DEVICE ON/OFF
Power On: Take your Rebel out of the box and place it flat on the floor. Press
the power button (located on the rear of your Rebel) once. Check the LED
indicator (located in the center of your Rebel). The battery indicator light
should be lit, indicating the Rebel is powered on.
Power Off: Press the power button once.
MAT SENSOR
There are four sensors under the foot mats on your Rebel.
When riding the scooter, you must ensure you are stepping on the foot mats. Do
not step or stand on any other area of your scooter.
The Rebel may vibrate or spin in one direction if weight and pressure are
applied to only a one-foot mat.
BATTERY INDICATOR
The display board is located in the middle of the Rebel.
- A green LED Light indicates the hoverboard is fully charged.
- Red flashing LED light and beeping indicate low battery.
- Blue light indicates the board is charging.
When the LED light turns red, please recharge the Rebel.
BEFORE RIDING
It is important that you fully understand all elements of your Rebel. If these
elements are not used correctly, you will not have full control of your Rebel.
Before you ride, learn the functions of the various mechanisms on your
scooter.
Practice using these elements of your Rebel at slower speeds in a flat, open
area before taking the Rebel out in public areas.
PRE-RIDE CHECKLIST
Ensure that your Rebel is in proper working order each and every time you
ride. If a part of the scooter does not function correctly, please contact our
Customer Support Center.
WARNING
Any Rebel that does not work properly can cause you to lose control and
fall. Do not ride a Rebel with a part that is damaged; replace the damaged
part before riding.
- Ensure the battery is fully charged before riding your scooter.
- Ensure that the screws on the front and back tires are locked firmly before each ride.
- Please wear all appropriate safety and protective gear as previously mentioned in the User Manual before operating your Rebel.
- Make sure to wear comfortable clothes and flat closed-toe shoes when operating your Rebel.
- Please carefully read the User Manual, which will assist in explaining the basic working principles and provide tips on how to best enjoy your experience.
SAFETY PRECAUTIONS
Different localities and countries have different laws governing riding on
public roads, and you should check with local officials to ensure you are
complying with these laws.
Hover-1 is not liable for tickets or violations given to riders who do not
follow local laws and regulations.
- For your safety, always wear a helmet that meets CPSC or CE safety standards. In the event of an accident, a helmet can protect you from serious injury and in some cases, even death.
- Obey all local traffic laws. Obey red and green lights, one-way streets, stop signs, pedestrian crosswalks, etc.
- Ride with traffic, not against it.
- Ride defensively; expect the unexpected.
- Give pedestrians the right of way.
- Do not ride too close to pedestrians and alert them if you intend to pass them from behind.
- Slow down at all street intersections and look to the left and right before crossing.
Your Rebel is not equipped with reflectors. It is not recommended that you
ride in conditions of low visibility.
WARNING
When you ride in low-visibility conditions such as fog, dusk, or night, you
might be difficult to see, which could lead to a collision. In addition to
keeping your headlight on, wear bright, reflective clothing when riding in
poor lighting conditions.
Think about safety when you ride. You can prevent many accidents if you think
about safety. Below is a helpful checklist for Compact riders.
SAFETY CHECKLIST
- Do not ride above your skill level. Ensure you have had enough practice with all functions and features of your Rebel.
- Before stepping on your Rebel, make sure it is placed flat on level ground, the power is on, and the Battery Indicator light is green. Do not step on it if the Battery Indicator light is red.
- Do not try to open or modify your Rebel. Doing so, voids the manufacturer warranty and may cause your Rebel to fail, resulting in injury or death.
- Do not use the Rebel in a manner that would put people or property in danger.
- If riding near others, keep a safe distance to avoid a collision.
- Be sure to keep your feet on the pedals at all times. Moving your feet off your Rebel while driving is dangerous and may cause the Rebel to stop or veer sideways.
- Do not operate the Rebel while under the influence of drugs and/or alcohol.
- Do not operate the Rebel when you are restless or sleepy.
- Do not ride your Rebel off of curbs, ramps, or attempt to operate in a skate park, empty pool, or in any way similar to a skateboard or scooter. The Rebel IS NOT A SKATEBOARD. Misuse of your Rebel, voids the manufacturer warranty and may lead to injury or damage.
- Do not continuously spin in place, it will cause dizziness and increases the risk of injury.
- Do not abuse your Rebel, doing so can damage your unit and cause failure to the operating system leading to injury. Physical abuse, including dropping your Rebel, voids the manufacturer’s warranty.
- Do not operate in or near puddles of water, mud, sand, stones, gravel, debris, or near rough and rugged terrain.
- The Rebel can be used on paved surfaces that are flat and even. If you encounter uneven pavement, please lift your Rebel over and past the obstruction.
- Do not ride in inclement weather: snow, rain, hail, sleek, on icy roads, or in extreme heat or cold.
- Bend your knees when riding on the bumpy or uneven pavement to absorb the shock and vibration and help you keep your balance.
- If you are unsure if you can safely ride on a specific terrain, step off and carry your Rebel. ALWAYS BE ON THE SIDE OF CAUTION.
- Do not attempt to ride over bumps or objects greater than ‘/2 in. even when prepared and bending your knees.
- PAY ATTENTION – look at where you are riding and be conscious of the road conditions, people, places, property, and objects around you.
- Do not operate the Rebel in crowded areas.
- Operate your Rebel with extreme caution when indoors, especially around people, property, and narrow spaces.
- Do not operate the Rebel while talking, texting, or looking at your phone.
- Do not ride your Rebel where it is not permitted.
- Do not ride your Rebel near motor vehicles or on public roads.
- Do not travel up or down steep hills.
- The Rebel is intended for use by a single individual, DO NOT attempt to operate the Rebel with two or more people.
- Do not carry anything while riding the Rebel.
- Individuals with a lack of balance should not attempt to operate the Rebel.
- Pregnant women should not operate the Rebel.
- The Rebel is recommended for riders ages 5 and older.
- At higher speeds, always take into consideration longer stopping distances.
- Do not step forward off of your Rebel.
- Do not attempt to jump on or off your Rebel.
- Do not attempt any stunts or tricks with your Rebel.
- Do not ride the Rebel in dark or poorly lit areas.
- Do not ride the Rebel off-road, near or over potholes, cracks, or uneven pavement or surfaces.
- Keep in mind that you are 4.5 inches (11.43 cm) taller when operating the Rebel. Make sure to go through doorways safely.
- Do not turn sharply, especially at high speeds.
- Do not step on the fenders of the Rebel.
- Avoid driving the Rebel in unsafe places, including near areas with flammable gas, steam, liquid, dust, or fiber, which could cause fire and explosion accidents.
- Do not operate near swimming pools or other bodies of water.
WARNING
When a hoverboard and a kart (sold separately) are being used, it is NOT
ADVISABLE to ride the combo uphill. If using on a steep incline above 5-10°, a
safety mechanism built into the hoverboard will activate, which will shut down
your hoverboard automatically. If this happens, dismount your hoverboard,
place it on a flat surface, wait 2 minutes, and then power your hoverboard on
again.
WARNING:
To reduce the risk of injury, adult supervision is required. Never use in
roadways, near motor vehicles, on or near steep inclines or steps, swimming
pools, or other bodies of water: always wear shoes, and never allow more than
one rider.
RIDING YOUR REBEL
FAILURE TO FOLLOW ANY OF THE FOLLOWING SAFETY PRECAUTIONS CAN AND MAY LEAD
TO DAMAGE TO YOUR REBEL VOID YOUR MANUFACTURER’S WARRANTY, LEAD TO PROPERTY
DAMAGE, CAUSE SERIOUS BODILY INJURY, AND CAN LEAD TO DEATH.
Before using your Rebel, be sure to familiarize yourself with the operating
procedures.
OPERATING YOUR REBEL
Make sure the Rebel is fully charged before initial use. For charging
instructions, please follow the details under CHARGING YOUR REBEL.
Stand directly behind your Rebel and place one foot on the corresponding foot
mat (as described in the diagram below). Keep your weight on the foot which is
still on the ground, otherwise, the Rebel may begin to move or vibrate, making
it difficult to step on evenly with your other foot. When you are ready, shift
your weight to the foot already placed on the Rebel and step on with your
second foot quickly and evenly (as described in the diagram below).
NOTES:
Stay relaxed and step on quickly, confidently, and evenly. Imagine climbing
skis, one foot, then the other. Look up once your feet are even. The Rebel may
vibrate or spin in one direction. if weight and pressure are applied to only a
one-foot mat. THIS IS NORMAL.
Find your center of gravity. If your weight is distributed correctly on the
foot mats and your center of gravity is level, you should be able to stand on
your Rebel just as if you were standing on the ground. On average, it takes
3-5 minutes just to get comfortable standing on
your Rebel and maintaining proper balance. Having a spotter will help you feel
more secure. The Rebel is an incredibly intuitive device; it senses even the
slightest bit of motion, so having any anxiety or reservation about stepping
on may cause you to panic and trigger unwanted movement.
When you first begin using your Rebel, the fastest way to move in your desired
direction is to focus in that direction. You will notice that just thinking
about which way you would like to go will shift your center of gravity, and
that subtle movement will propel you in that direction.
Your center of gravity determines which direction you move, accelerate,
decelerate, and come to a complete stop. As described in the diagram below,
tilt your center of gravity in the direction you wish to move.
To turn, focus on the direction you wish to turn and stay relaxed.
WARNING
Do not turn sharply at high speeds to avoid danger. Do not turn or ride
quickly along slopes, as it may cause injury.
As you get comfortable on the Rebel, you will notice it becomes easier to
maneuver. Remember at higher speeds, it is necessary to shift your weight to
overcome the centrifugal force.
Bend your knees if you encounter bumps or uneven surfaces, then dismount and
carry your Rebel to a safe operating surface. NOTES:
Try staying relaxed and focus on finding your center of gravity to
maintain full control of your Rebel.
Dismounting your Rebel can be one of the easiest steps, yet when done
incorrectly, may cause you to fall. To properly dismount, from a stopped
position, lift one leg up and set your foot back down on the ground (STEPPING
BACK). Then step off completely as described in the following
diagram. WARNING
Make sure to lift your feet completely off the foot mat to clear the Rebel
when stepping back to dismount. Failure to do so may send the Rebel into a
tailspin.
WEIGHT AND SPEED LIMITATIONS
Speed and weight limits are set for your own safety. Please do not exceed the
limits listed here in the manual.
- Maximum Weight: 130 lbs
- Minimum Weight: 44 lbs
- Maximum Speed: Up to 6 mph
WARNING
Overweight exertion on the Rebel may increase the possibility of injury or
product damage.
NOTES:
To prevent injury, when max speed is reached, the Rebel will beep to alert
the user and tilt the rider slowly back.
OPERATING RANGE
The Rebel can travel a distance of up to 3 miles on a fully charged battery in
ideal conditions. The following are some of the major factors that will affect
the operating range of your Rebel.
- Terrain: Riding distance is highest when riding on a smooth, flat surface. Riding uphill and/or on rough terrain will reduce distance significantly.
- Weight: A lighter user will have further range than a heavier user.
- Ambient temperature: Please ride and store the Rebel under recommended temperatures, which will increase riding distance, battery life, and overall performance of your Rebel.
- Speed and Riding Style: Maintaining a moderate and consistent speed while riding produces maximum distance. Traveling at high speeds for extended periods, frequent starts and stops, idling and frequent acceleration or deceleration will decrease the overall distance.
BALANCE & CALIBRATION
If your Rebel is unbalanced, vibrating, or not turning properly, you can follow the below steps to calibrate it.
- First, place the Rebel on a flat, horizontal surface such as the floor or a table. The foot mats should be even with each other and not tilted forward or backward. Make sure the charger is not plugged in and the board is turned off.
- Press and hold the ON/OFF button for a total of 10-15 seconds. The scooter will turn on, lighting the battery indicator on the board.
- After the front lights keep flashing you may release the ON/OFF button.
- Turn the board off and then turn the board back on. Calibration will now be completed.
SAFETY ALERTS
While riding your Rebel, if there is a system error or improper operation
performed, the Rebel will prompt the user in a variety of ways.
You will hear a beep if an error occurs. This is a warning sound to stop using
the device and may cause the device to stop suddenly.
The following are common occurrences where you will hear the Safety Alerts.
These notices should not be ignored, but appropriate action should be taken to
correct any illegal operation, failure Of errors.
- Unsafe riding surfaces (uneven, too steep, unsafe, etc.)
- When you step on the Rebel if the platform is tilted more than 10 degrees forward or backward.
- The battery voltage is too low.
- The Rebel is still charging.
- During operation, the platform self initiates to tilt due to excess speed.
- Overheating, or motor temperature is too high.
- The Rebel has been rocking back and forth for over 30 seconds.
- If the system enters protection mode, the alarm indicator will light up and the board will vibrate. This typically occurs when the battery is about to run out of power.
- If the platform is tilted forward or backward more than 10 degrees, your Rebel will power off and stop suddenly, possibly causing the rider to lose balance or fall off.
- If any or both tires are blocked, the Rebel will stop after 2 seconds.
- When the battery level has depleted below protection mode, the Rebel engine will power off and stop after 15 seconds.
- While sustaining a high discharge current during use (such as driving up a steep slope for a long period of time), the Rebel engine will power off and stop after 15 seconds.
WARNING
When the Rebel turns off during a Safety Alert, all operating systems will
halt. Do not continue attempting to ride the Rebel when the system initiates a
stop. Turn your Rebel off and back on to unlock it from a Safety Lock.
CHARGING YOUR REBEL
CHARGING THE REBEL
- Ensure that the charging port is clean and dry.
- Make sure that there is no dust, debris, or dirt inside the port.
- Plug the charger into a grounded wall outlet. The charging indicator light ON THE CHARGER will be green.
- Connect the cable with the power supply (100V 240V; 50/60 Hz).
- Align and connect the charging cable to the charging port of the Rebel. DO NOT FORCE THE CHARGER INTO THE CHARGE PORT, AS THIS MAY CAUSE THE PRONGS TO BREAK OFF OR PERMANENT DAMAGE TO THE CHARGE PORT.
- Once attached to the board, the charging indicator light ON THE CHARGER should change to RED, indicating that your device is now being charged.
- When the RED indicator light on your charger turns to GREEN, then your Rebel is fully charged.
- A full charge may take up to 7 hours. While charging, you will see a blue flashing light on the scooter, which also indicates charging. Do not charge for more than 8 hours.
- After fully charging your Rebel, unplug the charger from your Rebel and from the power outlet.
BATTERY CARE / MAINTENANCE
BATTERY SPECIFICATIONS
Battery Type: Rechargeable lithium-ion battery
Charge Time: Up to 7 hours
Voltage: 25.2 V
Initial Capacity: 2.0 Ah
BATTERY MAINTENANCE
The lithium-ion battery is built into the Rebel. Do not disassemble the Rebel
to remove the battery or attempt to separate it from the Rebel.
-
Use only the charger and charging cable supplied by Hover-1. Use of any other charger or cable may lead to damage to the product, overheating, and risk of fire. Use of any other charger or cable voids the manufacturer’s warranty.
-
Do not connect or attach the Rebel or the battery to a power supply plug or directly to a car’s cigarette lighter.
-
Do not place the Rebel or batteries near a fire, or in direct sunlight. Heating the Rebel and/or the battery can cause additional heating, breaking, or ignition of the battery inside the Rebel.
-
Do not continue charging the battery if it does not recharge within the specified charging time. Doing so may cause the battery to become hot, rupture, a ignite.
To preserve natural resources, please recycle or dispose of batteries properly. This product contains lithium-ion batteries. Local, state or federal laws may prohibit the disposal of lithium-ion batteries in ordinary trash. Consult your local waste authority for information regarding available recycling and/or disposal options. -
Do not attempt to modify, change, or replace your battery.
WARNING
Failure to follow the safety precautions listed below could lead to serious bodily injury and/or death. -
Use only the charger and charging cable supplied by Hover-1. Use of any other charger or cable may lead to damage to the product, overheating, and risk of fire. Use of any other charger or cable voids the manufacturer’s warranty.
-
Do not use your Rebel if the battery begins to emit odor, overheats, or begins to leak.
-
Do not touch any leaking materials or breathe fumes emitted.
-
Do not allow children and animals to touch the battery.
-
The battery contains dangerous substances, do not open the battery or insert anything into the battery.
-
Only use the charger provided by Hover-1.
-
Do not attempt to charge the Rebel if the battery has discharged or emits any substances. In that case, immediately distance yourself from the battery in case of fire or explosion.
-
Lithium-ion batteries are considered to be hazardous materials. Please follow all local, state, and federal laws in regard to recycling, handling, and disposing of Lithium-ion batteries.
WARNING
SEEK IMMEDIATE MEDICAL ASSISTANCE IF YOU ARE EXPOSED TO ANY SUBSTANCE THAT
IS EMITTED FROM THE BATTERY
CARE & MAINTENANCE
- Do not expose the Rebel to liquid, moisture, or humidity to avoid damage to the product’s internal circuitry.
- Do not use abrasive cleaning solvents to clean the Rebel.
- Do not expose the Rebel to extremely high or low temperatures as this will shorten the life of the electronic components, destroy the battery, and/or distort certain plastic parts.
- Do not dispose of the Rebel in the fire as it may explode or combust.
- Do not expose the Rebel to contact with sharp objects as this will cause scratches and damage.
- Do not allow the Rebel fall from high places, as doing so may damage the internal circuitry.
- Do not attempt to disassemble the Rebel.
- Use only the charger provided by Hover-1.
WARNING
Avoid using water or other liquids for cleaning. If water a other liquids
enter the Rebel, It will cause permanent damage to the internal components.
WARNING
Users who disassemble the Rebel scooter without permission will void the
warranty.
WARRANTY
For warranty information, please visit us
at:www.hover-1.com
Affix Serial Number Label Here:———-
@RideHoverl
@RideHoverl
@RideHoverl
www.Hover-l.com
866-831-1520
Documents / Resources
|
Hover-1 H1-REBEL Electric
Scooter
[pdf] User Guide
H1-REBEL, Electric Scooter
---|---
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>