FOMITO 2BFTR-120W LED Octagonal Softbox Light With Honeycomb Grid User Manual

June 8, 2024
FOMITO

FOMITO 2BFTR-120W LED Octagonal Softbox Light With Honeycomb Grid

Product Information

Specifications

  • Model: XYZ-2000
  • Power: 1200W
  • Capacity: 2 liters
  • Material: Stainless steel
  • Dimensions: 10in x 12in x 8in

Product Usage Instructions

Initial Setup

  • Before using the product for the first time, wash all removable parts with warm soapy water and dry thoroughly.

Filling the Reservoir

  • Fill the reservoir with the appropriate amount of water or liquid as indicated in the user manual. Do not overfill.

Operating the Product

  • Plug in the product and set the desired temperature or mode using the control panel.
  • Wait for the product to reach the set temperature before use.

Cleaning and Maintenance

  • After each use, allow the product to cool down before cleaning.
  • Refer to the user manual for specific cleaning instructions to maintain product performance.

FAQ

  • Q: Can I use this product for cooking rice?
  • A: No, this product is specifically designed for heating liquids and beverages, not for cooking solid foods.
  • Q: Is this product suitable for outdoor use?
  • A: No, this product is intended for indoor use only.

Specifications

  • High brightness:   Powerful 120W LED octagon softbox with 720 pcs LED beads, brightness of up to 11000 lumens.
  • Integrated softbox design: the softbox ‘ size is 95cm, made of high-quality PET fabric and reflective material, the integrated design, makes the installation more convenient and simple.
  • Two dimming methods: It can be controlled via the button on or an IR remote control
  • High-Quality light stand: It is made of aluminium alloy, a thickened tube, and its diameter is 30mm-26mm-22mm. Height can be freely adjusted between 100cm-280cm with the screw knobs

Package List

  • 2 x 120W LED Octagon softbox light
  • 2 x Honeycomb Grid cover
  • 2 x Carrying bag for softbox
  • 2 × 280CM light stand
  • 2 x Power adapter
  • 1 x Remote control
  • 1 x Oxford storage bag for the whole kit

Warm prompt
If you have any trouble in setting up the product, please feel free to email us with your order number to senyeah11@163.com,we will do our best to fix your problems as soon as we can.

Installation

  • STEP 1: Loosen the screw D on the light stand
  • STEP 2: Push along the arrow to open, then lock the screw a
  • STEP 3: Use screws (2) and (3) to adjust the height
  • STEP 4: Loosen the knob on the softbox. tum 90* and lock #
  • STEP 5: Press the lamp holder
  • STEP 6: When you hear *click,” the lightbox opens
  • STEP 7: Loosen the screw on the softbox, put it on the stand, and lock #
  • STEP 8: Put the soft cloth on the light box with Velcro
  • STEP 9: The LED softbox is installed

FCC STATEMENT

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

  1. This device may not cause harmful interference, and
  2. this device must accept any interference received, including interference that may cause undesired operation.

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, according to Part 15 of the FCC Rules.

These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

  • Reorient or relocate the receiving antenna.
  • Increase the separation between the equipment and the receiver.
  • Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
  • Consult the dealer or an experienced radio/TV technician for help.

Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
The device has been evaluated to meet general RF exposure requirements. The device can be used in portable exposure conditions without restriction.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals