DOMO DO8132 Ventilator Instructions

: June 5, 2024
: DOMO

Table of Contents

WARRANTY
SAFETY INSTRUCTIONS
HOW TO USE
ASSEMBLY
CLEANING
Documents / Resources

INSTRUCTION BOOKLET
VENTILATOR

DO8132

PRODUCT OF

WARRANTY

This appliance has a two-year warranty period. During this period the manufacturer is responsible for any failures that are the direct result of construction failure. When these failures occur the appliance will be repaired or replaced if necessary. The warranty will not be valid when the damage to the appliance is caused by wrong use, not following the instructions, or repairs executed by a third party. The warranty will only be valid if the warranty application has been completed by the dealer at the time of purchase. All parts, which are subject to wear, are excluded from the warranty.

Type nr. of appliance…………………….. DO8132
Name……………………………………………………………………………………………………………..
Address…………………………………………………………………………………………………………..
Date of purchase…………………………………………………………………………………………….
Tel : ………………………………………………………………………………………………………………..

RECYCLING INFORMATION
This symbol on the product or on its packaging indicates that this product may not be treated as household waste. Instead, it must be brought to the applicable collection point for the recycling of electrical and electronic equipment. By ensuring this product is disposed of correctly, you will help prevent potential negative consequences for the environment and human health, which could otherwise be caused by inappropriate waste handling of this product. For more detailed information about recycling this product, please contact your local city office, your household waste disposal service, or the shop where you purchased the product. The packaging is recyclable. Please treat the package ecologically.
If the supply cord is damaged, it must be replaced by the manufacturer, its service agent, or a similarly qualified person in order to avoid a hazard.

SAFETY INSTRUCTIONS

This appliance may be used by children from the age of 8 and up, and also by persons with a physical or sensory limitation, as well as mentally limited persons or persons with a lack of experience and knowledge. But only on the condition that these persons have received the necessary instructions on how to use this appliance in a safe way and know the dangers that can occur by using this appliance.
Children cannot be allowed to play with the appliance. Maintenance and cleaning of the appliance may not be done by children unless they are older than 8 years old and are under supervision.
Keep the appliance out of reach of children younger than 8 years old.

This appliance is suitable to be used in a household environment and in similar surroundings such as:

Kitchen for personnel of shops, offices, or other similar professional surroundings
Farms
Hotel or motel rooms and other surroundings with a residential character
Guest rooms or similar

Attention: This appliance cannot be used with an external timer or a separate remote control.

Don’t touch the appliance with wet hands or feet.
Don’t use the appliance barefoot.
Do not insert or allow fingers or foreign objects to enter any ventilation or exhaust opening as it may cause an electric shock or fire or damage the heater.
To prevent a possible fire, do not block air intakes or exhaust in any manner.
Always place the appliance on a stable, flat, level surface when operating. Do not cover the power cord, and do not place any objects on the power cord. Make sure the power cord can not be tripped over.
Make sure the cord isn’t placed on a hot surface.
Don’t pull the power cord or the appliance to remove the plug from the socket.
Don’t expose the appliance to rain, sun, etc.
Don’t let children or unauthorized persons use the appliance without supervision.
Don’t immerse the appliance in water.
Don’t use the appliance near a bath, shower, or swimming pool. This appliance is not intended for use in wet or damp locations.
Before cleaning the appliance always unplug the appliance first or put the switches in the “off” position.
When your appliance is damaged, switch it off and unplug the power cord. Don’t try to repair it yourself. Contact an electrician or the after-sales service of the manufacturer, to make that original parts will be used.
When you decide to never again use the appliance, we recommend cutting off the power cord completely, after you have removed the plug from the socket.
Installation of the appliance must be done according to the specifications of the manufacturer. A wrong installation can lead to accidents with people, animals, or damage to objects. The manufacturer cannot be held responsible for this.
The appliance must always be used upright.
The inlet grill of the appliance must always be left free.
Make sure that the current is the same as mentioned on the rating label. When in doubt, let it be checked by an electrician.
Don’t let the appliance operate when it is not necessary. Remove the plug from the socket when you don’t need the appliance.
Don’t cover up the air inlet and air outlet grille.
The power cord of this appliance cannot be replaced by the consumer. For the replacement of the cord, you can only make an appeal on the after-sales service of the manufacturer.
Do not use the appliance outdoors.
Do not allow children to use the appliance unless a supervisor is present and a person who is responsible for their safety has clearly described how the appliance works.
The appliance is not intended for use by persons (including children) with reduced
physical, sensory, or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instructions concerning the use of the appliance by a person responsible for their safety.
Never allow children to play with the appliance.
Keep the appliance out of children’s reach.

HOW TO USE

To adjust the speed, move the speed control to the required position :
0: to stop
1: slow
2: medium
3: fast
To make the fan head oscillate, push the knob on the motor housing. To stop the fan from oscillating, pull up on the knob.
To adjust the vertical angle, tilt the fan head up or down as desired.

ASSEMBLY

Mount the rear guard onto the front of the motor unit by matching the 4 positioning holes (H) on the rearguard to the 4 positioning round pins on the front of the motor unit.

Push in firmly until the pins protrude through the holes.
Secure the rear guard to the motor unit with the rear guard lock nut.
Insert the fan blade onto the motor shaft. Be sure that the pin in the shaft matches the slot on the fan blade. Press firmly until the fan blade stops. Secure the fan blade with the fan blade screw.
Test the fan blade operation by rotating it with your hand. There should be no friction with the rear guard lock nut. If the blade does not rotate freely, disassemble and repeat the procedure.
Attach the front guard to the rearguard by positioning the hook.
Join the front/rear guards by pressing firmly.
Secure the two guards by the fixing screw.