EE172 OnePlus Buds User Guide
- June 5, 2024
- OnePlus
Table of Contents
EE172 OnePlus Buds
Earbuds
PARTS
Connection and Use
Buds power-on/off
Open the charging box to turn on the OnePlus Buds. Place them in the charging
box and close the Cover to turn them of.
Device connection
Before pairing with a new device or reconnecting. please turn on the GPS
location information, Wi-Fi/ Mobile dataand Bluetooth in the notification bar
menu or phone settings.
While the buds are inside the charging box, open the charging box and press
and hold the setup button for 2 seconds. The indicator lamp of the charging
box will lash white. The buds will then be availab|le for pairing.
- If the box is being opened for the first time, OnePlus Buds will automatically be available for pairing. If a OnePluS phone is used, the phone will automatically pop up an animation about connecting the buds. Follow the prompts to connect phone with the OnePlus Buds.
- After factory settings are restored, pairing records will be erased. If the box is being opened for the first time, OnePlus Buds will automatically be available for pairing. If a OnePlus or Android phone with the Fast Pair function is being used, enable Bluetooth on the phone, and open the charging box for the OnePlus Buds. The phone will automatically pop up an animation about connecting the buds. Follow the prompts to connect the phone with OnePlus buds.
Note: For Non-OnePlus or Android phones without the Fast Pair function, open the charging box, and press and hold the setup button for 2 seconds. The indicator lamp for the charging box will flash white. Search for the buds in Bluetooth settings and tap Connect.
Automatic reconnection
After OnePlus Buds have been successfully paired with a device, the buds will
automatically reconnect to the device each time the buds start.
- reconnection fails, open the Bluetooth setting on the device, tap Previously Connected Devices and search for OnePlus Buds, and tap the buds to connect them.
Reconnection after a long-distance disconnection
If the OnePlus Buds have been disconnected from your device because you’re too
far, and you return to the effective distance of the connection within 10
minutes, OnePlus Buds will automatically reconnect with your device. f there
is no reconnection for 10 minutes, the buds Will automatically shut down. Ih
this case, you can put the buds into the charging bOx, close the cover, and
then open it to reconnect them.
New device connection in connected status
In case you need to connect the buds with another device, put the buds into
the charging box and connect them based on the instructions in “Device
connection” on page 5.
Functions and Operations
Call
- Answer a call and double-tap the touch area of the bud.
- Hangup call: double-tap the touch area of the bud.
- Reject a call: tap and hold the touch area of the bud for 5 seconds.
Charging buds
Put the buds in the charging box to charge them.
(The charging contacts at the bottom of the buds’ handle must be clean,
otherwise charging and use may be affected.)
Charge the charging box
- You can connect the charging box to a power supply through the power cable delivered with the buds to charge it.
- If the indicator lamp of the charging box is always red, the charging box is charging. If it is green, the charging box is fully charged.
Factory Reset
Put the two buds into the charging box and do not close the cover
- Press and hold the setup button on the charging box for 10 seconds. If the indicator lamp flashes red release the button. The buds are reset.
- After the buds have been reset, they will automatically be available for pairing when the cover is opened, and the indicator lamp will flash white.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>