GOZNEY Dome Stand Outdoor Oven Instruction Manual
- June 5, 2024
- GOZNEY
Table of Contents
Dome Stand
Technical Manual
This section details the process of building the stand and the correct installation of the Dome Stand.
Cautions & Warnings
Cautions & Warnings
Ensure you have fully read, understood, and comply with the cautions &
warnings in the Dome Users Manual supplied with the oven.
All four of the casters should always be locked unless you are moving the
oven.
Never attempt to move the oven when it is still warm, wait for it to fully
cool first.
When moving the oven on the stand always push/pull from the stand and not the
oven.
Remove anything loose from the stand and its shelves before moving it.
Placing hot items from the oven onto the wooden shelves may damage them, use
appropriate protection to avoid damage.
Gas Oven
Always disconnect the oven from the gas supply before moving the oven.
The casters should always be locked when the oven is connected to a gas
supply, even if the oven isn’t in use.
Ensure you’re using a Gozney-supplied gas connector or one that complies with
the Standard for movable gas appliances (ANSI Z21.69 / CSA 6.16), and a quick-
disconnect device that complies with the relevant Standards (ANSI Z21.41 / CSA
6.9).
The gas connector and the quick disconnect device or its associated piping
should never be used to limit the movement of the appliance.
Building & Installation
Build Manual
BUILD AREA
Build the stand in front of the area you intend to position Dome.
Ensure the ground is stable and level and capable of supporting the oven’s
weight.
Don’t place any of the parts on an abrasive surface and avoid damaging the
paintwork of the metal parts.
What’s In The Box
SCALE 1:1
Step 14
INSTALLING DOME
Ensure fixing F006 is in place on the stand before installing the oven.
Remove anything loose from the oven before moving.
Two people should pick up Dome from the rounded ends of the oven as shown.
Don’t use the mouth of the oven as a lifting point.