GOZNEY Arc XL Arc Booster User Manual
- May 15, 2024
- GOZNEY
Table of Contents
GOZNEY Arc XL Arc Booster
USER MANUAL
This section details safety critical information related to the use of the Booster and Arc Oven.
The Arc Booster is designed to enhance the performance and safety of the Arc Oven. It provides stability and support for the oven, ensuring safe operation and movement. The Booster must be assembled correctly in the designated area to ensure proper functionality.
Cautions & Warnings
- Ensure you have fully read, understood and comply with the cautions & warnings in the Arc Users Manual supplied with the oven.
- Never attempt to move the oven when it is still warm, wait for it to fully cool first.
- When moving the oven on the Booster always lift using the oven lifting points, not the Booster or shelf.
- Remove anything loose from the Booster and its shelves before moving it.
Gas Oven
- Always disconnect the oven from the gas supply before moving the oven.
- Ensure you’re using a Gozney supplied gas connector or one that complies with the Standard for movable gas appliances (ANSI Z21.69 / CSA 6.16), and a quick-disconnect device that complies with the relevant Standards (ANSI Z21.41 / CSA 6.9).
This section details the process of building the Booster and its installation.
Build Manual
BUILD AREA
- Build the Booster in the area you intend to position Arc.
- Ensure the surface is stable, level and capable of supporting the oven’s weight.
- Don’t place any of the parts on an abrasive surface and avoid damaging the paintwork of the metal parts.
What’s In The Box
SCALE 1:1
Step 1
FIXINGS WARNING
We recommend not fully tightening all nuts and bolts until the Booster has
been assembled.
This will ease the alignment of future fixings.
Fully tighten at Step 6.
Step 2
Step 3
Step 4
Step 5
Step 6
INSTALLING ARC
- Before installing Arc, assemble fixings F001 and F003 into the top of the Booster.
- Do not fully tighten these two fixings, there should be no more than 1/16” (2mm) of thread exposed
Step 8
INSTALLING ARC
- Ensure fixing F001 and F003 are assembled into the Booster before installing the oven.
- Remove anything loose from the oven before moving.
- Two people should pick up Arc from the lifting points (see Arc manual).
- Never lift Arc on your own.
- Do not use the mouth of the oven as a lifting point.
- Align Arc’s feet with the highlighted recesses. Ensure the feet are fully aligned before moving on.
*Note oven mouth should face Booster front.
Step 9
INSTALLING ARC
- Tighten fixing F001 until Arc is fully secured to the Booster.
- Be careful not to over tighten as it can damage the Booster.
- Never use Arc without it being secured to the Booster by F001.
Specifications
- Product Name: Arc Booster
- Model Number: DOC-0559(03)
FAQ
Q: Can I move the oven while it is still warm?
A: It is recommended to wait for the oven to fully cool before attempting to move it to prevent any damage.
Q: What should I do before installing Arc onto the Booster?
A: Before installing Arc, ensure fixings F001 and F003 are assembled into the top of the Booster. Do not fully tighten these fixings initially.