Power Dynamics 952.104 BC Series In-Outdoor Speaker Set 100V Instruction Manual

: June 5, 2024
: Power Dynamics

Table of Contents

BASIC CONNECTIONS
HOW TO CONNECT YOUR SPEAKERS
TECHNICAL SPECIFICATION
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

Power Dynamics 952.104 BC-Series In-Outdoor Speaker Set 100V **
Instruction Manual**

Power Dynamics 952 104 BC Series In Outdoor Speaker Set
100V

Congratulations to the purchase of this Power Dynamics product. Please read this manual thoroughly prior to using the unit in order to benefit fully from all features.
Read the manual prior to using the unit. Follow the instructions in order not to invalidate the warranty. Take all precautions to avoid fire and/or electrical shock. Repairs must only be carried out by a qualified technician in order to avoid electrical shock. Keep the manual for future reference.

Prior to using the unit, please ask for advice from a specialist. When the unit is switched on for the first time, some smell may occur. This is normal and will disappear after a while.
The unit contains voltage-carrying parts. Therefore do
NOT open the housing.
Do not place metal objects or pour liquids into the unit This may cause electrical shock and malfunction.
Do not place the unit near heat sources such as radiators, etc. Do not place the unit on a vibrating surface. Do not cover the ventilation holes.
The unit is not suitable for continuous use.
Do not plug or unplug the unit with wet hands.
If the plug and/or the mains lead are damaged, they need to be replaced by a qualified technician.
If the unit is damaged to such an extent that internal parts are visible, do NOT plug the unit into a mains outlet and DO NOT switch the unit on. Contact your dealer.
Do NOT connect the unit to a rheostat or dimmer.
To avoid fire and shock hazards, do not expose the unit to rain and moisture.
All repairs should be carried out by a qualified technician only.
During a thunderstorm or if the unit will not be used for a longer period of time, unplug it from the mains. The rule is: Unplug it from the mains when not in use.
If the unit has not been used for a longer period of time, condensation may occur. Let the unit reach room temperature before you switch it on.
To prevent accidents in companies, you must follow the application guidelines and follow the instructions.
Do not repeatedly switch the fixture on and off. This shortens the lifetime.
Keep the unit out of the reach of children. Do not leave the unit unattended.
Do not use cleaning sprays to clean switches. The residues of these sprays cause deposits of dust and grease. In case of malfunction, always seek advice from a specialist.
Do not force the controls.
This unit is with speaker inside which can cause a magnetic field. Keep this unit at least 60cm away from the computer or TV.
If the unit has fallen, always have it checked by a qualified technician before you switch the unit on again.
Do not use chemicals to clean the unit. They damage the varnish. Only clean the unit with a dry cloth.
Keep away from electronic equipment that may cause interference.
Only use original spares for repairs, otherwise serious damage and/or dangerous radiation may occur.
Switch the unit off prior to unplugging it from the mains and/or other equipment. Unplug all leads and cables prior to moving the unit.
Keep the original packing material so that you can transport the unit in safe conditions.

This mark attracts the attention of the user to high voltages that are present inside the housing and that are of sufficient magnitude to cause a shock hazard.
This mark attracts the attention of the user to important instructions that are contained in the manual and that he should read and adhere to.

The unit has been certified CE. It is prohibited to make any changes to the unit. They would invalidate the CE certificate and their guarantee!

NOTE: To make sure that the unit will function normally, it must be used in rooms with a temperature between 5°C/41°F and 35°C/95°F.

Electric products must not be put into household waste. Please bring them to a recycling center. Ask your local authorities or your dealer about the way to proceed. The specifications are typical. The actual values can slightly change from one unit to the other. Specifications can be changed without prior notice.

Do not attempt to make any repairs yourself. This would invalidate your warranty. Do not make any changes to the unit. This would also invalidate your warranty. The warranty is not applicable in case of accidents or damages caused by inappropriate use or disrespect of the warnings contained in this manual. Power Dynamics cannot be held responsible for personal injuries caused by the disrespect of the safety recommendations and warnings. This is also applicable to all damages in whatever form.

BASIC CONNECTIONS

Use the switch on the back of the speaker to choose output. The speakers can be used on either 8 Ohm or 100Volt line systems.

Examples

Power Dynamics 952 104 BC Series In Outdoor Speaker Set 100V - BASIC
CONNECTIONS

8ῺExamples

Power Dynamics 952 104 BC Series In Outdoor Speaker Set 100V - BASIC
CONNECTIONS 2

HOW TO CONNECT YOUR SPEAKERS

Step 1: Make sure the audio system is turned off before making any connection.
Step 2: Connect the speaker(s) to the output of the amplifier (Black = negative pole / Red = positive pole) (2).
Step 3: Adjust the rotary switch (1) to 100 Volt or 8Ω position (for directly operating the speaker at a low-impedance amplifier output).
Step 4: When connecting several speakers, make sure that all speakers have the same polarity and that the amplifier is not overloaded.

Power Dynamics 952 104 BC Series In Outdoor Speaker Set 100V -
SPEAKERS

TECHNICAL SPECIFICATION

| BC4OV| BC5OV| BC65V
---|---|---|---
Ref. nr.| 952.104/952.106| 952.108/952.110| 952.112/952.114
Power Max.| 100W @ 8 Ohm| 120W @ 8 Ohm| 150W @ 8 Ohm
Power Rms| 30W @ 8 Ohm| 35W @ 8 Ohm| 45W @ 8 Ohm
Tappings| 5, 10, 20W @ 100V/
8Ohm / Off| 7.5, 15, 30W @ 100V/
8Ohm / Off| 10, 20, 40W @ 100V/
8Ohm / Off
Frequency response| 100Hz-20kHz| 50Hz-20kHz| 40Hz-20kHz
Woofer| 4″ Polypropylene| 5.25″ Polypropylene| 6.5″ Polypropylene
Tweeter| 3/4″ Silk Dome| 1″ Silk Dome
SPL @ 1W/1m| 88dB| 89dB
IP rating| IPX5
Dimensions per speaker| 198 x 145 x 127mm| 240 x 179 x 153mm| 288 x 216 x 180mm
Weight| 1.70kg| 2.20kg| 3.00kg