global sources WA1012T 10.1 Inch Meeting Room Interactive Digital Signage User Manual

10.1″ , 13.3″ ,15.6″
MEETING ROOM
INTERACTIVE DIGITAL SIGNAGE
User Manual

Important Notices

Copyright Information

1)Do not push objects into holes and ventilation slots.
Do not expose this product to moisture or place any objects filled with liquids on or near the product.
Do not place a naked flame source, such as lighted candles, on or near this product.
Do not store or operate the device in environments where the temperature is above 50 degrees celsius or below -10 degrees celsius.
Do not intentionally hit the device or place heavy or sharp objects on the device.
Only use accessories specified by the manufacturer.
Keep the device away from benzene, diluents, and other chemicals.
Do not attempt to repair this product yourself. Always use a qualified service agent to perform adjustments or repairs.
All intellectual property rights in this publication are owned by and protected by applicable copyright laws and international treaty provisions. retains all rights not expressly granted. No part of this publication may be reproduced in any form whatsoever or used to make any derivative work without prior written approval.
Reserves the right to revise this publication, and/or make improvements or changes in the product(s) and/or the program(s) described in this documentation at any time without prior notice. The information in this document is provided in good faith, but without any representation or warranty whatsoever, whether it is accurate, complete, or otherwise, and on the express understanding that shall have no liability whatsoever to other parties in any way arising from or relating to the information or its use.
All other trademarks are the property of their respective owners. Other company and brand products and service names are trademarks or registered trademarks of their
respective holders.

Package Contents

Please make sure all of the following are present when you unpack your meeting room interactive digital signage.

Introducing the Meeting room interactive digital signage 10.1″, 13.3″, 15.6″

• LCD panel

• 10.1″ Resolution:1280800 , 13.3“ 15.6″ Resolution:19201080

• RK3288 Quad core cortex A17 / RK3399 Dual-core A72+quad-core A53 RK3566/3568 Quad core cortex A55

• RAM 2GB(RK3288) / Optional 4GB (RK3399/3566/3568 )

• Internal memory 16GB （RK3288) / Optional 32GB/64GB （RK3399/3566/3568 ）

• Android 5.1/8.1/10.0(RK3288) / Android 7.1/9.0/10.0(RK3399) / Android 11(RK3566/3568)

• 10-Point capacitive touch

• Wide-angle camera （2.0M/P ）

• WiFi 802.11 a/b/g/n/ac(RK3288/3399) , WiFi 802.11b/g/n(RK3566/3568)

• Ethernet interface ( POE function standard IEEE802.3at,POE+,class 4 ， 25.5W )

• Bluetooth 4.2

• USB for serial (RS232 Level RK3288/3399)
  USB for serial (TTL Level RK3566/3568)

• USB 2.0 host (RK3288)
  USB 3.0 host (RK3399/3566/3568)

• 3.5mm earphone + Microphone

• Micro USB OTG

• SD card, Max support to 64GB

• Microphone

• 2*2W Speaker

• LED light bar RGB

*If required, please ask for detailed specifications.

10.1″ Exterior Components

RK3288/3399
USB for serial(TTL  format)
RK3566/3568| 11| VESA 75*75MM
12| Power button

13.3″ Exterior Components

USB 3.0 host(RK3399/3566/3568)
5| USB for serial (RS232 Level)
RK3288/3399
USB for serial(TTL  format)
RK3566/3568
6| Ethernet with PoE
7| Recovery key
8| Micro USB OTG
9| DC in power supply port
10| Speaker
11| VESA 75*75MM
12| Power button

15.6″ Exterior Components

USB 3.0 host(RK3399/3566/3568)
5| USB for serial (RS232 Level)
RK3288/3399
USB for serial(TTL  format)
RK3566/3568
6| Ethernet with PoE
7| Recovery key
8| Micro USB OTG
9| DC in power supply port
10| Speaker
11| VESA 100*100MM
12| Power button

Installation instructions

FCC STATEMENT :
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1)This device may not cause harmful interference, and (2)This device must accept any interference received, including interference that may cause undesired operation.
Warning: Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.
FCC Radiation Exposure Statement:
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20cm between the radiator & your body.

This symbol on the product or in the instructions means that your electrical and electronic equipment should be disposed of at the end of its life separately from your household waste.
There are separate collection systems for recycling in your country. For more information, please contact the local authority or your retailer where you purchased the product.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>