Lenco Podo-152 Mp3-4 Player With Pedometer En 4GB User Guide
- June 5, 2024
- Lenco
Table of Contents
Lenco Podo-152 Mp3-4 Player With Pedometer En 4GB
Controls and Connections
(1) TFT Display
(2) Clip
(3) Button (Volume Up)
(4) Button (Volume Down)
(5) Memory Card Slot
(6) Earphone Output Jack
(7) Mic Hole / Reset Switch Hole
(8) Button (Previous / Fast-Backward)
(9) Button (Next / Fast-Forward)
(10) USB Mini Connector
(11) Button (Play/Pause, Power On/Off)
(12) M Button (Menu / Enter / Select)
Charging the battery
- Make sure that the computer is turned on. Connect the player to the computer by using the USB cable.
Now the computer will detect and install the driver automatically. Once the installation is complete, the player will be displayed in “My Computer” or for MAC users on the desktop.
Note: For Windows 98/98SE the driver needs to be installed first.
- Once connected to a computer the player will charge automatically (computer needs to be turned on). After 2-3 hours the battery is fully charged. At same time, the player is ready for media files upload / download with your computer.
Downloading the User’s Manual
- For consider environment protection, the detailed
User’s Manual is stored on the Player’s memory, or on the CD if provided, in a folder named “UTILITIES > User Manual”. To open it you need to download it onto your computer, and then you can view it oncomputer directly. Or, download the detail user manual via www.lenco.com/…downloads.
Note: To open the user manual the computer needs to have a .pdf reader. You can download a .pdf reader for free via http://get.a d obe.com/reader/
Downloading the Video Convert Tool
- The AMV video convert tool is stored on the Player’s memory, or on the CD if provided, in a folder named “UTILITIES > Video Conversion Software”.
Download it onto your computer for copy, and then you can install this tool on computer directly.
This symbol indicates that the relevant electrical product or battery should not be disposed of as general household waste in Europe. To ensure the correct waste treatment of the product and battery, please dispose them in accordance to any applicable local laws of requirement for disposal of electrical equipment or batteries. In so doing, you will help to conserve natural resources and improve standards of environmental protection in treatment and disposal of electrical waste (Waste Electrical and Electronic Equipment Directive).
Products with the CE marking comply with the EMC Directive (2004/108/EC) and
the Low Voltage Directive (2006/95/EC) issued by the Commission of the
European Community.
The declaration of conformity may be consulted at
http://www.lenco.eu/supportfiles/CE/jhvf7y80jasdol.pdf
®All rights reserved
References
- Adobe - Download Adobe Acrobat Reader
- Lenco.com | Officiële Lenco Webshop
- Lenco.com | Officiële Lenco Webshop