Rowenta Elite Optiliss Ionic CF7122V0 Hair Straightener Instruction Manual
- June 5, 2024
- Rowenta
Table of Contents
Elite Optiliss Ionic CF7122V0 Hair Straightener
Instruction Manual
Please read the instructions and safety precautions carefully before use.
GENERAL DESCRIPTION
A. Streigteners
B. ‘Power on’ light
C. Os/off the keypad
D. Thermostat
E. Straightening plates, with ceramic coating
F. Power cord
G. Hanging loop
H. “IONIC” system
SAFETY PRECAUTIONS
-
The appliance’s accessories become very hot during Avoid contact with the skin. Make sun that the supply cord never comes into contact with the hot parts of the appliance.
-
For your safety, this appliance complies with the appl cable standards and regulations (Low Voltage Directive, Electromagnetic Compatibility, EnvFonmental…).
-
The appliance must be unplugged:
– before clearing and maintenance procedures.
– if it is not waking correctly
– as soon as you have finished using it
– if you leave the room, even momentarily. -
Check that the voltage of your electricity supply matches the voltage of your appliance. Any error when connecting the appliance can cause irreparable harm, not covered by the guarantee.
-
As an additional safety measure, we recommend the installation of a residual current difference device in the electrical circuit supplying the bathroom, acting at not more than 30 mA. A* your installer for advice.
-
Caution: Never use the appliance with wet hands or near baths, basins, or other recipients containing water.
-
When using the appliance in the bathroom, unplug it after use as the presence of water nearby may pare a danger even when the appliance is turned off.
-
Close supervision is necessary when the appliance is on or in the presence of children or disabled people.
-
If the power cord is damaged, it must be replaced by the manufacturer, its after-sales service, or a person with similar qualifications, to avoid all danger.
-
Stop using your appliance and contact an Authorised Service Centre if:
– your appliance has fallen
– it does not work correctly. -
If your appliance is not working correctly, see
-
Troubleshooting”, or contact our Customer Helpdesk or your dealer.
-
Do not leave within the math of children.
-
Do not use it if the cord Is damaged.
-
Do not immerse or put under running water, even for cleaning purposes.
-
Do not hold with damp hands.
-
Do not hold the appliance by the casing, which is but by the handle.
-
Do not unplug by pulling on the cord, rather pull out by the plug.
-
Do not use an electrical extension lead.
-
Do not clean with abrasive or corrosive products.
-
Do not use at temperatures below 0°C and above 35°C.
GUARANTEE
Your appliance is designed for use in the home only and should not be used
for professional purposes. The guarantee becomes null and void in the case of
improper usage.
GETTING STARTED
Your appliance heats up very quickly (only 60 seconds), and the temperature
remains constant throughout use:
– Plugin the appliance
– Set the on-off switch to “1′ (Fig.1-C)
– Wait 60 sec; the appliance is ready for use (Fig. 2)
– Select the ideal temperature for your hair usi ng the Thermostat
(Fig.1-D)
– After use, unplug the appliance and let it cool down completely before
storing it away.
OPERATION
Use this product on clean, untangled, dry (cr slightly damp) hair.
- Do not use the straighteners on synthetic hair (wigs, extensions, et.).
- Take a small section of hair, a few centimeters in width, COMM it, and place it between the plates. Grip the hair firmly between the plates and slowly slide the appliance from the roots to the tips of the hair (Fig.3)
- If your hair is very thick or frizzy, you can improve the result by spraying your hair with water actors
- The ceramic plates protect your hair from excessive heat, thanks to an even distribution of the heat.
- Wait until your straightened hair has cooled down before styling (fig. 4).
PROFESSIONAL TIPS
- Always start with the layers of hair underneath: first, those at the nape, working around t3 the sides than the front.
- To avoid kinks in long sections of hair, use a fluid, continuous movement.
- To enhance the effect, you can apply styling mousse before straightening.
CLEANING
CAUTION Always unplug your straighteners and let them cool down before cleaning them.
- Never submerge the straighteners in water.
- To (..lean the straighteners, unplug them, let them coct down then wipe with a damp cloth and dry with thy cloth (fig. 5).
ENVIRONNEMENT PROTECTION FIRST!
Your appliance contains valuable materials which can be recovered or recycled. Leave it at a collection point.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>