NETGEAR RBS750-100NAS Orbi Whole Home Tri-band Mesh WiFi 6 Add-on Satellite User Guide
- June 5, 2024
- NETGEAR
Table of Contents
NETGEAR RBS750-100NAS Orbi Whole Home Tri-band Mesh WiFi 6 Add-on Satellite
User Guide
What’s in the box?
-
1x NETGEAR Orbi Wi-Fi 6 Satellite
-
1x Power adapter
Connect your Orbi satellite
-
Find a place for your Orbi satellite. Orbi satellites must be within range of your Orbi router’s Wi-Fi signal, so don’t place them too far apart from each other.
-
Connect the power adapter and turn your Orbi on at the wall.
Add your Orbi satellite to your network
- Open the Orbi app.
- Tap the icon in the top left corner.
- Tap ADD SATELLITE and follow the setup instructions.
Once connected, the light on the bottom of the satellite will turn blue.
That’s it, your Orbi satellite is up and running!
For NETGEAR’s Privacy Policy, visit www.netgear.com/about/privacy- policy. By using this device, you are agreeing to NETGEAR’s Terms and Conditions at www.netgear.com/about /terms-and-conditions. If you do not agree, contact Slingshot at www.slingshot.co.nz/contact to return your device.
