Sunzeo

Black Friday Bluetooth Earbuds Bluetooth Headphones Wireless Earbuds

Specifications

• FEATURES: CVC Noise Canceling Bluetooth Earbuds
• BRAND: Sunzeo
• COLOR: Black
• MANUFACTURER: GPTEEA
• MANUFACTURER PART NUMBER: GP06Q13
• ASSEMBLED PRODUCT DIMENSIONS (L X W X H): 1.00 x 0.60 x 0.50 Inches

Introduction

It Snugly fits in the ear, is hidden, lightweight, and suitable for a variety of situations. It has Built-in Microphone – with HD Crystal Sound. It has Multipoint Connection – you can Connect Two Devices with Long Battery Life – Premium Quality Lithium Accumulator Simultaneous Magnetic Charging – No More Fiddling with Cords

HOW TO OPERATE

Place your earbuds in pairing mode. The first step is to put your earbuds in pairing mode.

• On your phone, go to Settings – Bluetooth.
• Scan the Bluetooth category for new gadgets.
• Connect your device by selecting it.
• Play your preferred music.

HOW TO CONNECT TO AN ANDROID PHONE

• To begin, go to Settings…
• Then select Connections.
• Then select Bluetooth…
• Then, in the top-right corner of your screen, tap Scan.
• Then, on your headphones, hit and hold the power button.
• Finally, locate and tap your headphones.

HOW TO CONNECT WIRELESS EARBUDS

Pull down the shade from the top of your Android device and long-press the Bluetooth symbol. It will immediately take you to the Bluetooth menu, where you may switch it on and then search for devices. Select the headphones you want to pair by tapping their name.

HOW TO USE

• Pull your earlobes together to secure the earphones.
• To secure the earbud in your right ear, for example, lightly tug on the earlobe with your left hand. At the same time, press the earbud into your ear canal with your right hand’s index finger.

HOW TO INSTALL IT ON ANDROID DEVICE

• Press and hold the Pair button on the bottom of the charging case for 5 seconds while your earbuds are in it.
• Tap Connect in the notification that comes for your Surface Earbuds on your Android, then Set up > Done.

HOW TO CHARGE EARPHONES

• Use an appropriate charger. Bluetooth headsets usually come with their own charger.
• When charging, make sure all the plugs are in place.
• Charge in the charging port or on the base.
• Make sure your Bluetooth headset is charged.
• When charging, do not use the headset.

HOW TO SET UP ON IPHONE

• Go to Settings > Bluetooth on your device and enable Bluetooth.
• Place your device in discovery mode and wait for your accessory to emerge.
• When your accessory name shows onscreen, tap it to pair.

Frequently Asked Questions

• When my wireless earphones are fully charged, how do I know?
  When your earbuds are plugged in and charging, the charging case will blink red. The LED will stop flashing and become solid red once fully charged.

• On Bluetooth headphones, where is the power button?
  You’re referring to the middle of the “three.” It’s fantastic because everything is on the same side. If you want to connect to your phone, the center button also serves as a “answer and hang-up” button.

• Why won’t my Bluetooth connect?
  Go to Settings > System > Advanced> Reset Options > Reset Wi-Fi, Mobile, and Bluetooth on an Android phone. To unpair all of your devices on iOS and iPadOS, go to Settings > Bluetooth, tap the info icon, then select Forget This Device for each device, then restart your phone or tablet.

• Why aren’t my earbuds communicating with one another?
  Turn off your device’s Bluetooth option. Remove the earbuds from the casing and they will automatically turn on. To manually sync the left and right earbuds, double-press both of them at the same time. NOTE: Try it again if it doesn’t work the first time.

• Why can’t I connect more than one Bluetooth earbud?
  Depending on your audio settings, headphones may only play in one ear. Check your audio properties to make sure the mono option is disabled. Also, make sure that the voice levels on both earphones are equal.

• Why won’t my earbuds charge?
  The most likely cause is a problem with your cable or USB port. Your Bluetooth headphones are not charging because the USB cable is damaged or the USB is put incorrectly. Make sure your USB is fully inserted in both the power supply and the headphones.

• How long do earbuds take to charge?
  The earphones take around 2 hours to fully charge. If the battery is low, charging it in the charging case for 10 to 20 minutes can give you an extra hour of use.

• What’s the deal with AirPods blinking orange?
  The orange light on any of the existing AirPods models indicates that they need to be charged. If your AirPods continue to light orange, try plugging them into a power source. On a single charge, the AirPods Gen 2 may last for about 5-6 hours and up to 24 hours with the charging case.

• Why is my iPhone unable to detect Bluetooth devices?
  Make sure your Bluetooth accessory and your iOS or iPadOS device are in close proximity. Turn your Bluetooth accessory off and then back on. Make sure your Bluetooth equipment is turned on and fully charged or plugged in. Check to check whether the batteries in your item need to be replaced.

• When not in use, can I store wireless earbuds in a charging case?
  The battery will gradually decline over time, which is OK; however, charging it every time it drops below 20% charge will greatly extend the battery life of your wireless earbuds. Leaving your wireless earphones in their case while not in use is actually better for the battery life of your headphones.

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>