isimple BTS320 Vehicle Bluetooth Adaptor User Manual
- June 5, 2024
- iSimple
Table of Contents
isimple BTS320 Vehicle Bluetooth Adaptor
ABOUT THIS PRODUCT
BTS320 is a Bluetooth adapter that plugs into any standard AUX jack. This compact little device packs a powerful punch. Just plug into your AUX port, and sync it with your phone’s Bluetooth. It takes less than sixty seconds. Now you can enjoy music streaming from Spotify, Pandora, Google Play, YouTube Red, iTunes, or whatever else you’re using.
Features
- Compatible with any standard 3.5mm AUX input (in your car or stereo system) and any device with Bluetooth
- Wireless music streaming
- Control your music’s playback wirelessly
- Pair once, and you’re good to go
- Up to 8 hours of battery life
- Includes charger for any USB outlet
BOX CONTENTS
Be careful when removing all items from the packaging tray Take care not to
tug or pull on cables.
- Bluetooth Adapter (A) Plug into your car’s AUX port after initial charging
- USB POwer Source (B) Plug this into your BT adapter and into a power source to
- 3.5mm EXtension cable (C) f your BTS320 doesn’t ft into the car’s AUX area, this cable gves you extra room charge
CHARGING GUIDE
-
Step 1
Plug the micro-USB end of the enclosed BTS320 charging cable (B) into the BTS320 (A). -
Step 2
Plug the USB end of the BTS320 charging cable into a power source. When connected to a USB power source the BT icon will glow red while charging. When charging is complete, red LED light will turn off. Charging takes 2-3 hours
PAIRING GUIDE
-
Step 1
After charging your BTS320, unplug Bluetooth Adapter (A) from the USB cable. Make sure the Bluetooth operation on your phone is turned on. -
Step 2
Turn on BTS320 by pushing and holding the Bluetooth button for3 seconds. BT icon should begin blinking red and blue. Power is now on, and you are now in pairing mode. -
Step 3
Open the Bluetooth menu on your smartphone. and scan for available Bluetooth devices. Find “BTS32o” from the list, and select “Connect”
When a successful connection has been established, LED light will change to a solid blue light
INSTALLATION SETUP
After charging you BTS320. plug the Bluetooth adapter into your car’s AUX
port. If your BTS320 does not fit in your car’s AUX part area.
NOTE: Make sure you are parked in a safe spot before installation or
whenever you are pairing a device. NEVER WHILE DRIVING.