HMmagnets B0C4NVQYZ2 3.5 Inch x 10-16 Magnetic Vent Air and Heat Deflector User Guide
- June 1, 2024
- HMmagnets
Table of Contents
HMmagnets B0C4NVQYZ2 3.5 Inch x 10-16 Magnetic Vent Air and Heat
Deflector
USER GUIDE
Model 3.5 in. x [10-16] in.
Hello! Thank you for choosing our product. We are a small family business in the US, and we truly appreciate your support. We hope this magnetic air vent deflector will be beneficial and efficient for you!
INSTALLATION
1. Confirm if your vent surface is magnetic (made of magnetic metal) by placing a fridge magnet on it.
2. For non-magnetic vent surfaces like wood, plastic, aluminum, brass, etc., clean the vent surface to remove any dust or debris that may affect sticker adhesion. Attach each of the included double-sided 3M stickers to each magnetic slot (5 stickers in total). Apply pressure to ensure secure adhesion.
3. To protect your vent surface from damage and avoid the need for repositioning, place the deflector upside down on the vent and extend it as needed for measurement. Adjust the deflector to the precise length required for your vent (up to 16″).
4. Attach the deflector to the vent frame, ensuring it is positioned away from the damper and screw areas. Secure all five magnets onto the vent frame. If you are installing on a non-magnetic vent surface using the 3M stickers, please apply pressure to ensure a secure adhesion.
IMPORTANT NOTE: If you wish to completely block the airflow through the vent, you can consider using our magnetic vent covers. Visit our website at www.hmmagnets.com to find the appropriate cover size using our size guide.
If you have any issues or questions, please feel free to reach out to us at info@hmmagnets.com. We strive to respond within 24 hours.
Best regards,
Christa
Founder of HM magnets
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>