Rubyoung R830 Desktop Bluetooth Speaker Birmingham Jazz Green User Manual

R830 Desktop Bluetooth Speaker Birmingham Jazz Green
User Manual

Product name: High Power Hi-Fi Bluetooth Speaker
Shenzhen Rubyoung Technology Co., Ltd.
Room 0205, 2nd Floor, Yuanxing Science, and Technology Mansion East Block, 1 Songpingshan Road, Nanshan District, Shenzhen, Guangdong,518057, China

Build a house full of music. facing the sea with spring flowers blossoming!
Rubyoung
A gift for yourself. your family and your friends!

High power HE-Fi Bluetooth speaker

1. Unpacking
   Unpack from the top, and take out the user guide, speaker, and power cord in tum.

2. Power-on
   Connect the socket and the power receptacle on the back of the speaker through a power cord.

3. Tum-on
   After power-on, turn the main power switch on a. bade to “ON’.
   Nola:
   1. In daily use, you can press down the POWER” key rather than turn the main power switch ON/OFF to set the speaker .. _ the standby mode.
   2. When the speaker wit not be used for a long time or we wilt go out, the main power switch ON/OFF can be turned to ‘OFF’ IDaul off the power.
   

4. Bluetooth pairing
   Man, you press the ‘Pairings key, the Bluetooth indicator on the IBLUETOOTif key flashes and the speaker enters the Bluetooth pairing mode. Turn on the mobile phone Bluetooth and select the *Rutryoungg pairing in the Bluetooth lief. The indicator on the IBLUETOOTH° key turns white, indicating successful parking.

5. Volume control
   Turn the volume control left to turn down the volume while turn It right to turn up the volume
   Congratulations!
   Now, you can play music via Bluetooth.
   For Information about product pet/trances, please keep reading.
   

6. Effect mode selection
   When you turn the “MODE” knob to the “OUTDOOR”, “HIFI” and “AMBIENT” in turn, the speaker will enter the outdoor, HIFI, and ambient effect modes respectively. The HIFI mode is set by default.

7. Standby switch
   In daily use, press the “POWER” key to enable the speaker to enter the standby mode.

8. Sound source selection
   When a 3.5mm analog signal is to be input, connect an analog source to the “AUX IN” interface on the back, and press the “AUX” key to switch the speaker to the analog input source.
   When optical fiber input is required by a TV set-top box or game machine for a movie or game, connect the optical fiber input to the “OPTICAL IN” interface, and press the “OPTICAL” key to switch the speaker to the optical fiber input source. When a Bluetooth connection is required, press the “BLUETOOTH” key to return to the Bluetooth input source. by default.
   Note:
   “Outdoor” effect:
   It is a special effect for outdoor scenes, and it can offer the user appropriate sound pressure and sound radiation distance in the open air.
   “HIFI” effect:
   It features the triple-frequency balance output with emphasized high degree of reduction.
   “Ambient” effect:
   It is a special effect, which produces soft and great tones and is adapted to different kinds of music.

Product specifications

Bring a pleasant surprise to life!

Magnetic replaceable panel design
Integrated w th up-to ‘date printing and dyeing technology and an appreciation, the panel can be customized with classic pictures or photographs for your own use or as a gift to perfectly express your appreciation
Replacement method:
Hold the label at the right lower corner of the speaker panel, and pull it out to take down the complete panel.
Customization route:
Please consult your local dealer.

FCC Requirement
Any changes or modifications not expressly approved by the party responsible for compliance could void the user s authority to operate the equipment.
This device complains es with Part 15 of the FCC  Rules Operation is subject to the following two conditions:

1. this device may not cause harmful interference, and
2. this device must accept any interference received, including interference that may cause undesired operation.

Note: This :equipment: has been tested and found to compile with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference n a residential installation. This equipment generates, uses, and can radiate radio frequenay energy, .and if not installed and used in accordance with the instructions, may cause:harmful interference to radio communications. However, there is no guarantee that interference will not occur in a part clear installation. If this: equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Report or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>