GrowLED MGL001 LED Grow Planter User Manual

LED Grow Planter
User Manual

Product Spec

Structure Drawing

MGL001

Assembly Instructions

1. LED cleaning and assembly
   A: Cleaning and maintenance
   (1) Prior to cleaning the device, isolate the unit by removing the cord from the device and power outlet. Avoid immersing the unit in water.
   (2) Clean the pot and cotton rope with detergent. Use a cotton swab to clean the floating ball from the inner side of the pot.
   (3)Wipe the device clean with a damp micro fiber cloth when necessary.
   B: Removal and installation process
   (1) Take out the pot; Push the lock to catch up to the top gently; then push the hose connector out of the Outer pot; finally push down to remove the component.
   (2) The assembly and disassembly steps are reversed.

2. Pour water or nutrient solution into a plant pot.

3. Fill the inner pot with preferred planting soil and add the seeds. Please do not add water above the MAX level.

4. Choose the modes as the suitable modes for plants and begin to grow your baby plant!
   You can choose the modes according to what types of seed you plant and choose suitable lighting hours for your plants. The modes and indicator meanings are as follows:
   A: The green indicator light is on when firstly plug in the power cord. Long press the power button to turn on the light.
   B: AUTOMATIC SMART TIMER FOR EACH MODELED: Modes as herbs/vegetables,flowers, and fruits corresponding to the indicator light as Green, Yellow, and Red. The grow planter is automatically 16 hours on and 8 hours off on herbs/vegetable mode to make sure plants absorb enough light to do photosynthesis and enough time to rest. Automatically 14 hours on and 10 hours off on Flower mode; (2% -3% tolerance ).
   C: Long press the power button to turn off the light.
   D: Suggest growing your plant according to the plant growth rule table.

Category

| Seedling stage PPFD| Vegetative stage PPFD| Fruit-bearing stage PPFD|

Irradiation time (H)

---|---|---|---|---
Veggies| | 150-200| | 16
Flowers| | 20-100| | 14
Succulent/Dwarf plant| 150-200| 200-300| | 14
Fruits| 150-300| 300-400| | 12
Short day flower| 150-250（16H）| 250-350（10-8H）| 350+（12H）|
Long day flower| 150-250（16H）| 250-350（14H）| 350+（14H）|

Notes: Photosynthetic Photon Flux Density( PPFD): PPFD is measuring how many photons actually land on the canopy; represents the number of photons per unit time area in the visible light wavelength range, the correlation between the number of photons and photosynthesis. The unit is μmol/m2S.
d) As the plant grows, it’s necessary to adjust the height of the lamp cap. Keep the height/distance of the lamp cap and the top of the plant about 5-7cm. (See picture 5/6) .

Technical description

This product is only for indoor use. This device is suitable for growing the following plants: seedlings, flowers, herbs, succulents, etc; not suitable for macro-flora such as shrubs, trees, and other larger plant species. This product uses full-spectrum LED lights to support proper plant growth indoors.

Safety guidance

1. This product is only for indoor use.
2. Children should be supervised at all times and cautioned that the device is not a toy and should not be played with.

Warnings

1. Please use the adapter provided by this product, do not use other types of adapter power supply.
2. Do not add water above the MAX level so as not to rot the root phenomenon of plants.
3. Do not use if the cord/plug or the outer pot is damaged. If the power cord is damaged, it must be replaced, otherwise could result in a risk of fire, electric shock, or injury to persons.
4. Be sure to keep the cord/controller/adaptor away from heat, standing water, and sharp edges.
5. The product is used for plant growing space. The light required by plants, and the effect of planting need to be based on necessary conditions for planting seeds, like nutrients, temperature, humidity, etc.
6. Do not use the appliance for anything other than the intended use.
7. Do not disassemble the unit or attempt to make any repairs yourself. Incorrect assembly or repair could result in a risk of fire, electric shock, or injury to persons when operating.
8. If you have any questions, please call customer service: TBD

Warranty Card

Product Model：|
---|---
Purchase date：|
Customer name：|
Warranty service：|
Contact details：|

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>