RZB 982378.002 Smart Free Instructions

INSTRUCTION
Serie smart+free
Bluetooth control unit for LED drivers
09-3220.002
30-2019
IP 20 220-240 V / 50 Hz
2 x 0,75 – 1,5 mm²

982378.002 Smart Free

DIN 4844
power off before installation, maintenance or repair

RZB
Rudolf Zimmermann,
Bamberg GmbH
Rheinstraße 16
D-96052 Bamberg
Deutschland
Telefon +49 951/79 09-0
Telefax +49 951/79 09-198
www.rzb.de
info@rzb-leuchten.de

Warning!
Hazardous voltages. Risk of electric shock or fire. Only qualified professionals should make the connections.
Disconnect the mains power supply and verify ist absence prior to installation.

Instruction: +

Technical Data:

Mains Input
Voltage range: 220 – 240 V
Frequency: 50 Hz
Max. mains current: 1,16 A

Mains Output
Voltage range: 220 – 240 V
Frequency: 50 Hz

Standalone DALI Output
Voltage range: 9 – 12 VDC
Number of DALI interfaces connected 1 Konverter

Radio transceiver
Operating frequencies: 2,4…2,483 GHz
Maximum output power: + 4 dBm
Operating conditions
Ambient temperature, Ta -20°C – +50°C
Max. case temperature, Tc +70°C

Connectors
Wire cross section range (solid and stranded): 0,75 – 1,5 mm2
Wire strip length: 6 – 7 mm
Tightening torque: 0,4 Nm

Note 1. The control unit is a built-in class II device. Use an external mounting box (e.g. junction box 982391.009), if the control unit is not mounted inside another insulated device.
Note 2. Control unit and its DALI interface do not comply with IEC 60929!
Connect only directly to a DALI driver. Do not connect to an existing DALI network.

Disposal Instructions

In line with EU Directive 2002/96/EC for waste electrical and electronic equipment (WEEE), this electrical product must not be disposed of as unsorted municipal waste.
Please dispose of this product by returning it to the point of sale or to your local municipal collection point for recycling.

Description

It is a wireless control unit for LED and halogen drivers with DALI dimming interface .
The control output has different operating modes, which are delivered pre- configured by RZB.
Function modes:
DALI Broadcast
RGB DT6 (Device Type 6)
RGBW DT8 (Device Type 8)
Tunable White DT8 (2700K-6500K)
1-channel pushbutton coupler
The device is also designed for integration in a luminaire.
Attention: The control unit does not comply with IEC 60929 and therefore it is not designed to be connected to an existing DALI network. The control unit can be used only in a closed system, i.e. as a part of a luminaire, which is not connected to an external DALI network.
The control unit is operated wirelessly via smartphone or tablet using the Casambi app and Bluetooth 4.0 protocol. The Casambi app supports Android (from 4.4) and Apple (from iOS 8.2) devices and can be downloaded free of charge from Apple App Store and Google Play Store.
The control units form a wireless mesh network automatically so that a large number of fixtures (max. 127) can be controlled from any point. No external gateway or Wireless LAN Network module are needed.
The control unit can be operated also from a standard on/off wall switches.

Installation

Make sure that the mains voltage is switched off when making any connections.
Use 0,75 – 1,5 mm solid or stranded conductor electrical wires. Strip the wire 6-7 mm from the end.
When using flexible cables, ferrules must be used.
Insert the wires to the corresponding holes and tighten the connector screw. Make sure to connect the input and outputs correctly. Mains input connector is marked with letters L and N with an arrow pointing inwards, while the mains output connector is marked with letters L and N with an arrow pointing outwards. The DALI output is marked with + and – symbols.
If you install the control unit in a warm environment (i.e. inside a luminaire or in a ceiling outlet box above a luminaire), make sure that the ambient temperature does not exceed the specified maximum value.

DALI Tunable White DT8
for 2-channel
Warm white: address 0
Cool white:   address 1| DALI RGB DT6
for 3-channel
Red:    address 0
Green: address 1
Blue:    address 2| DALI RGBW DT6
for 4-channel
Red:    address 0
Green: address 1
Blue:    address 2
White:  address 3
---|---|---

Note 1. Control unit is a built-in class II device. Use an external mounting box (e.g. junction box 982391.009), if the control unit is not mounted inside another insulated device.
Note 2. Control unit and its DALI interface do not comply with IEC 60929! Connect only directly to a DALI driver. Do not connect to an existing DALI network.

Reichweite

Casambi uses mesh network technology so each control unit acts also as a repeater. Longer ranges can be achieved by using multiple Casambi units.

Compatible devices:
iPhone or iPad (from iOS 8.2),
Android ( from 4.4)
with full Bluetooth 4.0 support

1Range is highly dependant on the surrounding and obstacles, such as walls and building materials.
The coverage of the radio signal depends on the environment, e.g. on luminaire, building construction, furniture or people and must be tested and approved in the installation.
To ensure a good radio connection, the control unit must not be completely covered with metal!

Placement in a luminaire

The control unit has an integrated antenna for easy application.
To optimize the coverage in each direction, some design guidelines should be followed when installing the device.
The antenna is located at the corner of the housing.It is located at the bottom of the printed circuit board, directly above the bottom of the device.
The control unit has some large components on the top of the circuit board.
So if you mount the antenna at the bottom, the other components have the least possible impact on the antenna performance.
If the device is mounted on a metal plate (for example on the frame of a luminaire), the radio signal can be permanently disturbed.
In this case, under certain circumstances, a cut below the antenna is required so that the radio signal can exit the structure.
The cut-out area should be as large as possible.
Also, the device should be placed as far away as possible from vertical metal structures.

Dimming without app, via light switch

1. Turn lights on from a wall switch.
2. Quickly flick the wall switch off (max.1 sec.) and back on. The light level starts to increase gradually.
3. Flick the switch again at desired dim level. The selected level is saved automatically.

Casambi app quick start guide

First time use
Casambi app is easy to use. Follow these simple steps:

1. Download the app from Apple App Store or Google Play Store.
2. Switch on your Casambi enabled luminaires.
3. Open the app.
4. Casambi app will automatically find all Casambi enabled luminaires that are switched on.
5. Tap on the „Take all lamps into use“
6. Casambi app will automatically add all found luminaires to one network and open the ‘Lamps’ tab
7. Assign one of four sharing options for your network (see page „Network setup and sharing“)

Casambi app quick start guide

Network setup and sharing

If you want to operate your luminaires from multiple smartphones and tablets, you can choose the sharing option under „Network Setup“.
The default setting of a network is “Not shared”, so the network is only stored on the setup device.

1. Under “More” tab, select “Network Setup” and click on “Sharing Settings”.

2. Tap on the „Sharing“ to change the sharing mode.

3. There are four different sharing modes:
   „Not Shared“, „Administrator only“, „Password protected“ and „Open“.
   If the “Administrator only”, “Password protected” or “Open” are selected, the network will be uploaded to the cloud server and can be accessed from other mobile devices as well.

4. Add email address and password for the network.

5. Confirm the settings with “Save”.

Standard gestures to control the app

With the following gestures you can control your luminaires:

• Tap on the light icon to turn the luminaire on or off.
• Pan light icon left or right to adjust light level of the luminaire.
• Pan light icon up or down to adjust the color temperature of the luminaire.
• Keep light icon pressed to change the color of luminaire and to save your favorite colors to the palette.

Scenes

Under scenes you can create light scenes, suitable for any occasion. It is possible to control several lights with one click to create a perfect ambience create. A luminaire can be used in several scenes.

1. Tap on “Add a scene” and enter a name for the scene.

2. Select one or more luminaires and adjust them for the scene.
   You can set color temperature or color individually for each luminaire.

3. When you have finished adjusting the scene, click on “Back” and confirm with “Done”.

4. To create additional scenes, click on “Edit” below the scene and then on the “+” symbol.

Zusatzinfo / Additional info

https://itunes.apple.com/de/app/casambi/id731859317?mt=8| https://play.google.com/store/apps/details?id=casambi.ambi &hl=de
Link zur weiteren Information| Link to more information
https://www.rzb.de/fileadmin/assets/publications/pub_pdf/App_Anleitung_smart_free.pDf| https://www.rzb.de/fileadmin/assets/publications/pub_pdf/App_Guide_smart_free.pdf

EU-Konformitätserklärung / EU Declaration of Conformity

EC Declaration of Conformity
We, the manufacturer

Name: Casambi Technologies Oy
Address: Linnoitustie 4 A 02600 Espoo, Finland
Telephone: +358 10 501 2950
declare under our sole responsibility that the following product
Brand name: Casambi
Model: CBU-ASD
Description: Bluetooth 4.0 Wireless Control Unit for LED Drivers is in conformity with the provisions of Council Directives
Radio Equipment Directive (RED) 2014/53/EU
Restriction of Hazardous Substances (RoHS) 2011/65/EC and
Regulation (EC) No 1907/2006 of the European Parliament and of the Council (REACH).
The following harmonised standards and technical specifications have been applied:
Health and Safety (Article 3.1a):
IEC 61347-2-11:2001 (Ed 1)
IEC 61347-1:2015 (Ed 3)
Electromagnetic Compatibility (EMC) (Article 3.1b):
ETSI EN 301 489-1 v2.1.1
ETSI EN 301 489-17 v3.1.1
Radio Spectrum Efficiency (Article 3.2): EN 300 328 v2.1.1
To meet these standards the device must be used in accordance with the manufacturer’s instructions.
At Espoo 23th  of October, 2017
Casambi Technologies Oy

Casambi Technologies Oy
Linnoitustie 4 A
02600 Espoo, Finland
www.casambi.com
info@casambi.com
tel. +358 10 501 2950
Instruction:
09-3220.002
30-2019

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>