PXF LIGHTING Siena LED Ceiling Lamp Installation Guide
- September 17, 2024
- PXF LIGHTING
Table of Contents
PXF LIGHTING Siena LED Ceiling Lamp
Product Information
Specifications:
- Brand: PXF Lighting
- Model: SIENA LED
- Input Voltage: 220-240V
- Frequency: 50-60Hz
- Power Options: 11W, 18W, 23W
- Dimensions (mm): F – 330, H – 60, A – 200, P – 28
- Weight: 1kg
Product Usage Instructions
Installation:
- Ensure power supply is switched off before installation.
- Mount the luminaire securely according to the provided guidelines.
- Connect the LV power supply and control cables, maintaining basic insulation.
Light Source Replacement:
The light source in the luminaire should only be changed by the producer,
service representative, or a qualified person. Follow manufacturer guidelines
for replacement.
FAQ
Q: Can I replace the light source myself?
A: No, the light source should only be changed by the producer, service
representative, or a similarly qualified person.
Q: What type of insulation should be maintained between power supply and
control cables?
A: Basic insulation should be provided between the LV power supply and
control cables to ensure safety.
DIMENSION
INSTALLATION
SIENA LED – TYPE OF INSTALLATION
SPECIFICATION
220-240V / 50-60Hz
| Power [W] | F | H | A | P | Weight[kg] |
|---|---|---|---|---|---|
| 11; 18; 23 | 330 | 60 | 200 | 28 | 1 |
Light source used in this luminaire should be changed by the producer or its
service representative or similarly qualified person.
Classification of insulation maintained between LV power supply and control
cables – basic insulation. Provide basic insulation between the LV power
supply and control cables.
WIRING
Important warnings:
- The luminaries may be installed by qualified registered personnel only.
- Any manipulation inside the luminaire when the power is activated causes the risk of electric shock.
- The manufacturer is not responsible for any flaws resulting from non-compliance with these instructions.
- The manufacturer reserves the right to change the construction of the product.
- Do not install the luminaire in places without sufficient air circulation.
- To guarantee safe luminaire functioning, please follow the instructions in the installation instructions.
- PXF Lighting website: www.pxf.pl
INSTALLATION
The European Directive 2002/96/EC on waste electrical and electronic equipment, requires that electric and electronic devices must be disposed of in the normal household waste. The crossed out wheeled bin is reproduced in order to remind obligations towards separate collection. For correct disposal, please use authorized waste disposal facilities or return to the distributor at the date a new lighting fitting is purchased. Lamps, if disposed together with the lighting fitting, shall not be broken up since they contain substances which are highly polluting to the environment. Unauthorized disposal of the foregoing waste material is punishable by law.
PXF Lighting
73 Jutrzenki Street
02-230 Warsaw
tel.: +48 22 33 44 000
fax: +48 22 33 44 033
www.pxf.pl